SPRINT 42|10 LINEAR (Reference-Nr. 080149)

•  
  Reference number 080149

  Manufacture Year 2013

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Lathes

• Type of Machine

  Turret lathes (Capstan) and turret automatics

• Manufacturer

  DMG MORI

• Control

  Fanuc

• Description

  
  

  General
  Two spindle Swiss turning automatic lathe; Control: Fanuc 310is
  Working area
  Bar diameter max.	42 mm

• Specification

  
  

  Changing kit from steady to sliding headstock	Changing kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronism
  Drive for support for back working	Drive for support for back working operation (slide 2) power 0.55 KW
  Axial drilling unit for back work.oper.	Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mm
  Double tool h. for ext.machining on rev.	Double tool holder for external machining on revolver for shaft 16x16
  Double drill hold. on rev.cyl.junct.d.25	Double drill holder on revolver with cyl. junction diam.25mm
  Rad.driven mill.-drill.unit on rev.	Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpm
  Double axial driver drill.-mill.-unit on rev.	Double axial driven drilling and milling unit on revolver with cyl. junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpm

• State

  Used