Register for free
Login Register
487,623 active members
487,623 active members
8,206 visitors online

CNC-STEP

Products

We bring precision to the point.

High-Z S-400 CNC Router
High-Z S-400 CNC Router
High speed milling machine (HSC)
CNC-STEP e.K.
High speed milling machines (HSC)
High-Z S-400 CNC Router
With the high-Z milling and CNC engraver you purchase an allround talent in TÜV-certified quality (EMC).

Whether you want to relax complex parts on a sliding table or want to clamp the workpieces in a high Vice the machine stands on a frame, is powered with 2 motors in X and thus allows completely to edit part used to be.

Or would you simply run CNC milling in the form of engraving or drilling work? Then you work just on a flat surface on the attach for example an MDF panel, which you have once plan milling and are then able, up to approx. +-0,02 mm exactly and without depth regulator into the Z-depth to work.

All CNC-milling are available due to the improved cable routing with colored energy chains on all axis. Further, all machines with an emergency stop push button twice to entsichernden are equipped...
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
High-Z S-720/T CNC Fräse Portalfräse Kugelgewindetrieb 720x420mm
 High-Z S-720/T CNC Fräse Portalfräse Kugelgewindetrieb 720x420mm
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
This cnc unit is able to carry out an engrave and mill speed of approx. 8.000 mm/min. and express travels up to 12.000 mm/min.

Product details CNC Router S-720/T:

Drive: 4 brushless stepping motor by Nanotec with 4,2 Amps each
2 motors for constant tension and compression during milling operation on X-Axis
Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
Ball bearings at both sides of ball screws on X and Y axis
Working speed around 8000 mm/min max.
Traverse speed of rapid feed: max. 12.000 mm/min
Technical resolution: 0,00635 mm ( 1/10 Step )
Reversal error max.: +/- 10µm ( 0,01mm )
Table size / clamping area: 1050 x 510 mm
Traverse Paths: X=720 mm; Y=420 mm; Z= 110 mm
  • Milling machine frame
  • Ball screws
  • Emergency-Stop-Button
  • Control Front
Product details Homepage Product request
RaptorX-SL XL Gantry CNC Router Machine 3200/S15 with 3200 x 1510mm traverse path
RaptorX-SL XL Gantry CNC Router Machine 3200/S15 with 3200 x 1510mm traverse path
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
he application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available.It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter).This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.Considering our new concept of working with an "invisible" motor for the X-axis and the proven high performance of the entire machine, we will not have to wait long for imitators in the industry to try copy this.
  • CNC-STEP production
  • support struts
  • Bridge Raptor topview
  • overseas transport
Product details Homepage Product request
T-Rex 0712 CNC Milling Machine: 700x1200mm / WINDOWS and LINUX
T-Rex 0712 CNC Milling Machine: 700x1200mm / WINDOWS and LINUX
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
CNC Router / Engraving machine / portal milling machine / milling system with ball screw drive
Product details:
- Drive: 3 brushless brand stepping engines with 4,5 ampere.
- Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis!
- Linear guide on the X and Y axis by HIWIN / THK ! Z-axis diameter 16 mm round-linear guiding, all -smoothened and 61hrc surface hardened.
- Multiple ball-bearing ball-screw spindle on all axes, proprietary brand!
- Rapid traverse max. ca. 17.000 mm/min
- Operating speed max. ca. 12.000 mm/min
- Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm
- Backlash maximal ca. +/- 10µm (0,010 mm)
- Repeat accuracy: ca. 0,01 mm
- Clampin surface of grooven panel / T-slot table1650 x 880 mm
- Travels: X=1200mm; Y=700mm; Z= 130 mm
  • T-Rex portal system
  • Bridge CNC-milling maschine
  • CNC-STEP radio remote control
  • TÜV-certified control
Product details Homepage Product request
CNC Router High-Z S-400/T: XYZ Table 400 x 300 x 110 mm / Ball Screws WIN, Linux
CNC Router High-Z S-400/T:  XYZ Table 400 x 300 x 110 mm / Ball Screws WIN, Linux
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The High-Z / T allows high precision (repeatability about 0.01 mm) and high speeds of up to 12 meters per minute.

Product details CNC Router S-400/T:

- Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
- 2 motors for constant tension and compression during milling operation on X-Axis
- Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
- Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
- Ball bearings at both sides of ball screws on X and Y axis
- Working speed around 8000 mm/min max.
- Traverse speed of rapid feed: max. 12.000 mm/min
- Technical resolution : 0,00635 mm ( 1/10 Step )
- Reversal error max.: +/- 10µm ( 0,01mm )
- Table size / clamping area: 730 x 390 mm
- Traverse Paths: X=400 mm; Y=300 mm; Z= 110 mm
  • Milling machine front
  • Ball screws
  • Engraving machine sideview
  • Engraving machine Kress motor
Product details Homepage Product request
High-Z S-1000 / CNC Router 1000x600 / Windows Linux compatible
High-Z S-1000 / CNC Router 1000x600 / Windows Linux compatible
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The large CNC Router Machine / CNC Engraving and Milling Machine for 3D and 2D CNC milling and engraving

Details CNC Router S-1000:


•Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
•2 motors for constant tension and compression during milling operation on X-Axis
•Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
•Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
•Ball bearings at both sides of ball screws on X and Y axis
•Working speed around 3000 mm/min max.
•Traverse speed of rapid feed: max. 4.000 mm/min
•Technical resolution : 0,003 mm ( 1/10 Step )
•Reversal error max.: +/- 30µm ( 0,03mm )
•Table size / clamping area: 1330 x 690 mm
•Traverse Paths: X=1000 mm; Y=600 mm; Z= 110 mm
  • CNC Router Axis Overview
  • Emergency-Stopp-Button
  • Accurate workmanship
  • High-Z S-1000 Top view
Product details Homepage Product request
High-Z S-1000/T CNC Router / CNC Engraver 1000 x 600 x 110 mm / Ball Screws / Linux / Windows
High-Z S-1000/T CNC Router / CNC Engraver 1000 x 600 x 110 mm / Ball Screws / Linux / Windows
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
This cnc unit is able to carry out an engrave and mill speeds of approx. 8.000 mm/min. and express travels up to 12.000 mm/min.
Productdetails CNC Router S-1000/T:
- Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
2 motors for constant tension and compression during milling operation on X-Axis
- Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
- Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
- Ball bearings at both sides of ball screws on X and Y axis
- Traverse speed of rapid feed: max. 12.000 mm/min
- Technical resolution: 0,00635 mm ( 1/10 Step )
- Reversal error max.: +/- 10µm ( 0,01mm )
- Table size / clamping area: 1330 x 690 mm
- Traverse Paths: X=1000 mm; Y=600 mm; Z= 110 mm
  • with slot plate
  • with Kress-motor
  • Emergency-Stop-Button
  • Slot table
Product details Homepage Product request
High-Z S-1400/T CNC Router / CNC Engraver 1400 x 800 x 110 mm / Ball Screws / Linux, Windows
High-Z S-1400/T CNC Router / CNC Engraver 1400 x 800 x 110 mm / Ball Screws / Linux, Windows
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The machine series is designed for commercial and industrial applications.

Product details:

Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
2 motors for constant tension and compression during milling operation on X-Axis
Guide ways X 30mm diam. and Y axle 22 mm diam./ Z Axis 16mm, grinded and with 61hrc hardened surface
Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
Ball bearings at both sides of ball screws on X and Y axis
Working speed around 7.500 mm/min max.
Traverse speed of rapid feed: max. 8.500 mm/min
Technical resolution: 0,00635 mm ( 1/10 Step )
Reversal error max.: +/- 10µm ( 0,01mm )
Table size / clamping area: 1730 x 880 mm
Traverse Paths: X=1400 mm; Y=800 mm; Z= 110 mm
  • Ball screws
  • CNC engraver
  • Linear guides
  • y-axis z-axis
Product details Homepage Product request
High-Z S-1400/T-105: CNC Router / CNC Machine 1400 x 1100 x 110 mm / Ball Screws / Linux, Windows
High-Z S-1400/T-105: CNC Router / CNC Machine 1400 x 1100 x 110 mm / Ball Screws / Linux, Windows
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The affordable large XL CNC milling machines with deformation-resistant aluminum frame.
Product details:

- Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
- 2 motors for constant tension and compression during milling operation on X-Axis
- Guide ways X 30mm diam. and Y axle 22 mm diam./ Z Axis 16mm, grinded and with 61hrc hardened surface
- Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
- Ball bearings at both sides of ball screws on X and Y axis
- Working speed around 7.500 mm/min max.
- Traverse speed of rapid feed: max. 8.500 mm/min
- Technical resolution: 0,00635 mm ( 1/10 Step )
- Reversal error max.: +/- 10µm ( 0,01mm )
- Table size / clamping area: 1730 x 110 mm
- Traverse Paths: X=1400 mm; Y=1100 mm; Z= 110 mm
  • high performance Kress-motor
  • HIWIN linear guides
  • High quality ball screws
  • Overview XL milling maschine
Product details Homepage Product request
High-Z S-720 portal milling machine / 720x420x110mm WINDOWS LINUX kompartibel
High-Z S-720 Komplettansicht
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The inexpensive and multifunctional CNC unit and XYZ table for machining steel, aluminum, wood, plastic and many other materials.

Equipment / Product details XYZ Table S-720:

•Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
•2 motors for constant tension and compression during milling operation on X-Axis
•Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
•Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
•Ball bearings at both sides of ball screws on X and Y axis
•Working speed around 3000 mm/min max.
•Traverse speed of rapid feed: max. 4.000 mm/min
•Technical resolution : 0,003 mm ( 1/10 Step )
•Reversal error max.: +/- 30µm ( 0,03mm )
•Table size / clamping area: 1050 x 510 mm
•Traverse Paths: X=720 mm; Y=420 mm; Z= 110 mm
  • High-Z S-720 Overview
  • High-Z S-720 Overview
  • Control Zero 3 Front view
  • Sideview High-Z S-720
  • Control 4-Channel back
Product details Homepage Product request
High-Z T-Rex CNC Wood Router
High-Z T-Rex CNC Wood Router
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
High-Z T-Rex CNC Wood Router
High-Z T-Rex CNC Wood Router
Product details Homepage Product request
RaptorX-SL Large CNC Router Machine 2200/S15 with 2200 x 1510mm traverse path
RaptorX-SL Large CNC Router Machine 2200/S15 with 2200 x 1510mm traverse path
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available.It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter).This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.Considering our new concept of working with an "invisible" motor for the X-axis and the proven high performance of the entire machine, we will not have to wait long for imitators in the industry to try copy this.
  • XXL portal system
  • good workmanship
  • overseas transport
  • CNC-STEP ships worldwide
Product details Homepage Product request
RaptorX-SL Large CNC Router Machine 2200/S20 with 2200 x 2010mm traverse path
RaptorX-SL Large CNC Router Machine 2200/S20 with 2200 x 2010mm traverse path
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).

The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.

Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available.

It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter).

This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.
  • Raptor bridge
  • steel construction
  • CNC-STEP lower Rhine region
  • We also pack for overseas
Product details Homepage Product request
RaptorX-SL XL Gantry CNC Router Machine 3200/S15 with 3200 x 1510mm traverse path
RaptorX-SL XL Gantry CNC Router Machine 3200/S15 with 3200 x 1510mm traverse path
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available.It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter).This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.
  • CNC-STEP portal system
  • manufacturing site
  • stable struts
  • CNC-milling machine
Product details Homepage Product request
RaptorX-SL XYZ Table 1200/S15 with 1200 x 1510mm traverse path
RaptorX-SL XYZ Table 1200/S15 with 1200 x 1510mm traverse path
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
Clamping AreaX -1500 x Y-1700 mm
X-Axis Travel1200 mm
Y-Axis Travel1510 mm
Z-Axis Travel300 mm Standard, optional up to 600mm available
Bridge Clearance Z
( Bottom of bridge and milling spindle adaptor to table top support struts )
Variable : 150/300 and 400 mm depending on the table top support struts ( optional, price per piece 195,00 Euro ). When raw material mounted on the floor up to 850mm( Caution ! Limited x-axis travel )
Positioning speed X+Y / Z
40.000 mm/min max. ( in connection with mit WIN PCNC USB or Mach3 )
Working speed
20.000 mm/min max./ 3D-travel up to 10.000 mm/min. ( depending on the contour shape, use of software Mach3 )
Step width X 0,0213 mm
Step width Y + Z 0,0113 mm
Backlash
Maximum appr. +/- 0,045 mm ( 45 µm )
Repeat accuracy
approx. 10 µm
Positioning error
can be calibrated
Drive X / Y / Z
Stepper motor 9,4 Ampere / 930 Ncm holding torque !!
Drive type X / Y / Z
Low backlash pecision planetary gears with 11000 Ncm output torque
  • Table support struts
  • Frontview CNC portal system
  • Quality mode in Germany
  • worldwide shipping
Product details Homepage Product request
RaptorX-SL XYZ Table 1200/S20 with 1200 x 2010mm traverse path
RaptorX-SL XYZ Table 1200/S20 with 1200 x 2010mm traverse path
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).

The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.

Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available.

It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter).

This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.
  • Raptor production
  • precise workmanship
  • CNC-STEP high quality product
  • overseas possible
Product details Homepage Product request
T-Rex 0609 CNC Milling Machine: 600x900mm / WINDOWS and LINUX
T-Rex 0609 CNC Milling Machine: 600x900mm / WINDOWS and LINUX
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
By using recirculating ball screws a High-Z/T-Rex CNC-milling machine achieves fantastic precision and a almost immeasurable backlash of +/-0,01 mm.
Drive: 3 brushless brand stepping engines with 4,5 ampere.
Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis!
Linear guide on the X and Y axis by HIWIN / THK ! Z-axis diameter 16 mm round-linear guiding, all smoothened and 61hrc surface hardened.
Multiple ball-bearing ball-screw spindle on all axes, proprietary brand!
Rapid traverse max. ca. 17.000 mm/min
Operating speed max. ca. 12.000 mm/min
Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm
Backlash maximal ca. +/- 10µm (0,010 mm)
Repeat accuracy: ca. 0,01 mm
Clampin surface of grooven panel / T-slot table1300 x 780 mm
Travels: X=900mm; Y=600mm; Z= 130 mm
  • Portal system CNC-STEP
  • Loslager Y-Achse
  • Radio remote control CNC-STEP
  • Bridge with bellows
Product details Homepage Product request
T-Rex 1215 CNC Milling Machine: 1200x1500mm / WINDOWS and LINUX
T-Rex 1215 CNC Milling Machine: 1200x1500mm / WINDOWS and LINUX
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
CNC Machine / Engraver / portal milling machine / milling system with ball screw drive

product details:

- Drive: 3 brushless brand stepping engines with 4,5 ampere.
- Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis!
- Linear guide on the X and Y axis by HIWIN / THK ! Z-axis diameter 16 mm round-linear guiding, all smoothened and 61hrc surface hardened.
- Multiple ball-bearing ball-screw spindle on all axes, proprietary brand!
- Rapid traverse max. ca. 12.000 mm/min
- Operating speed max. ca. 8.000 mm/min
- Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm
- Backlash maximal ca. +/- 10µm (0,010 mm)
- Repeat accuracy: ca. 0,01 mm
- Clampin surface of grooven panel / T-slot table 1860 x 1340 mm
- Travels: X=1500mm; Y=1200mm; Z= 130 mm
  • connection box
  • Connections portal system
  • Bridge milling machine
  • Sledge linear guide HIWIN
Product details Homepage Product request
T-Rex 1224 CNC Milling Machine: 1200x2400mm / WINDOWS and LINUX
T-Rex 1224 CNC Milling Machine: 1200x2400mm / WINDOWS and LINUX
Portal and Gantry type milling machine
CNC-STEP e.K.
Portal milling machines
CNC Engraver / portal milling machine / XYZ Table router with ball screw drive
product details:
- Drive: 3 brushless brand stepping engines with 4,5 ampere.
. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis!
. Linear guide on the X and Y axis by HIWIN / THK ! Z-axis diameter 16 mm round-linear guiding, all smoothened and 61hrc surface hardened.
. Multiple ball-bearing ball-screw spindle on all axes, proprietary brand!
. Rapid traverse max. ca. 12.000 mm/min
. Operating speed max. ca. 8.000 mm/min
. Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm
. Backlash maximal ca. +/- 10µm (0,010 mm)
. Repeat accuracy: ca. 0,01 mm
. Clampin surface of grooven panel / T-slot table 2800 x 1340 mm
. Travels: X=2400mm; Y=1200mm; Z= 130 mm
Product details Homepage Product request
PlasCUT-1350 Plasma Cutter
PlasCUT-1350 Plasma Cutter
Plasma jet cutting machines
CNC-STEP e.K.
Plasma jet cutting machines
PlasCUT-1350 Plasma Cutter
The plasma arc cutting equipment High-Z PlasCUT-1350 is suitable for plasma arc torching as well as milling wood, PVC, etc. Delivery is complete with above shown base frame including connecting pieces and two pull-out drawers for water fillings. With a movement speed of a maximum of 2.5 meters per minute during operation, it processes all sliceable metallic materials up to 16 mm.
Connection for exhaust systems available on the backside. Wavy-arranged, exchangeable supporting plates. Stable construction. Usable for milling works on wood, PVC, etc.
Can be loaded from the side or from the top without any problem. Due to the contact surface of 1650 x 1200 ideal for plate standard format of 1500 x 3000, cut in three parts.
Traverse paths of the machine: Plasma operation: 1350 x 1050mm. Milling operation:1400 x 1050mm.
  • Plasma cutter
  • Bridge plasma cutting system
  • View drawers
  • Connection extraction system
Product details Homepage Product request
GranitoGrav photo engraving extension system for granite and glass
GranitoGrav photo engraving extension system for granite and glass
Engraving machine
CNC-STEP e.K.
Engraving machines
lYou just upload your Farb.- or black and white photo in the CAD-CAM software ConstruCAM 3D in the specially developed module, specify the output of the required size and release the toolpaths calculated. This file is opened in the machine software and sent to the machine. The CAM software works precisely and in no time your data creates so with the CNC machine and the GranitoGrav-Photoengraving - module first class photos in all the above-mentioned materials.The consumption costs are extremely low: Mounted Points cost about 3- 4 € each and last for about 3-5 large or 10 small images in granite _.
A photo with the size of 300 x 230mm needs  about a processing time of 40-50 minutes. Pictures of 15x10 cm are already created in about 12-15 minutes. The innovation for all masons, stone plants, stone processing, grave designing, memorial design etc.
Ideal for grave stones and memorial plaques and glass engraving
  • GranitoGrav CNC-STEP
  • engraving glass rotation axis
  • engraving granite
  • Einstein granite engraving
Product details Homepage Product request
17 one line / single line fonts
17 one line / single line fonts
Engraving machine
CNC-STEP e.K.
Engraving machines
17 one line / single line fonts
These writings are high-quality writings, which were developed particularly to engraving and to plot. Since these writings are not filled, they are very fast spent.

The writings are present in type the 1 or Open format and can be inserted thereby on Windows (starting from Windows 2000), Apple and Unix. These writings can be spent without external tool compensation directly, which shortens the computing time and the operating time substantially.

The writings are delivered as Type 1-Font (Post script) and Open Type Font.

The left picture shows 5 examples of the fonts from the CD.

Use them with all plotters, engravers, cnc routers or cnc plasma cutters and water jet cutters.
  • Examples CNC-Engraving
  • Engraved brass plate
  • Engraved music sheet
  • Product nameplate
Product details Homepage Product request
Depth controller / Engraving stopper
Depth controller / Engraving stopper
Engraving machine
CNC-STEP e.K.
Engraving machines
220100
The new depth controller by CNC-STEP comes with a linear rail with ball bearing circulation, thus it’s not only smooth-running but also indestructible.

The pressure is regulated by means of a spring. Watch this video and see how simple the one-time installation of the depth controller for engraving works is. This video also shows you how simple the engraving stopper for milling works can be clamped.

With its open and in the area of hundredths of millimetres depth-adjustable teflon-coated flange it smoothly slides over any material without scratching it.
Thus it secures consistent engravings and processing depth for all engraving works and the manufacture of circuit boards/PCBs independent from varying material thickness or variations in the plainness of the table surface.
Once mounted, the engraving stop never needs to be removed, as in its clamped modus it is adjustable to any milling works due to its high stability.
Product details Homepage Product request
1050 watts milling engine 1050 FME-1 by AMB (formerly Kress 1050-FME-1)
1050 watts milling engine 1050 FME-1 by AMB  (formerly Kress 1050-FME-1)
Other accessory
CNC-STEP e.K.
Other accessories
211105
Due to its continuous adjustable number of revolutions starting with 5000 rev./min., this motor can be greatly applied for all applications on Plexiglas, plastics, PVC, etc., as those materials start to melt at a number of revolutions of 10,000 rev./min. when using cheaper milling tools. This results in a milling degrade and a minimum of quality.

Also the motor is extremely silent (at 5000 rev./min. only 74 dB), thus applicable in your cellar without disturbing your neighbours.
Product details Homepage Product request
Loading ...