Kohlebürsten Suhner Fräsmotoren

Replacement carbon brushes for the following of our AMB (Kress) milling motors models: 1050 FME-1, 1050 FME-1 DI, 1050 FME-P, 1050 FME-P DI,
Set of 2 as the wear of the wear brushes is usually even. The set consists of 2 different carbon brushes, one with shut-off device and one without.

Translated with DeepL

Due to its continuous adjustable number of revolutions starting with 5000 rev./min., this motor can be greatly applied for all applications on Plexiglas, plastics, PVC, etc., as those materials start to melt at a number of revolutions of 10,000 rev./min. when using cheaper milling tools. This results in a milling degrade and a minimum of quality.

Also the motor is extremely silent (at 5000 rev./min. only 74 dB), thus applicable in your cellar without disturbing your neighbours.

Product characteristics:

MAXX-Power engine 1050 watts
Slimmest design for best ergonomics
Solid shaft electronic control for constand achievement and number of revolutions
Gentle approach and current surge limitation
Armared coil of the engine vagainst dust and particle infestation
Steel engine flange with double stocking for higher milling forces
Spindle lock for easy changig of the milling tools
Electronic overload protection prevebts an overheating of the engine
Switching off carbon brush condustors for the protection of the engine
To the drive suitably by bending waves
Mains cable with patent Quick catch and 4m rubber inlet. In the lengths of 4 and 6 meters as accessories available.

Milling motor for cnc router

Wireless USB keyboard/ Handwheel for operating CNC machines via WinPC NC or for example Mach3

The remote control is made to use all cnc controlled machines, which are driven with different versions of WinPC NC CAM software from Lewetz, in your basic functions via radio.


Our wireless remote control works with any CAM software which customizes the key assignment via hotkeys.

Annoying dragging around a regular PC keyboard is abolished in the main work with the CNC machine.

In addition, the dust-and splash-proof IP65 housing of the keypad is made of rugged plastic, shock resistant and provided with an additional round rubber bumper edge.

Thus, you operate your machine in a very simple and practical way for example when starting from zero points on workpieces as in contrast to an operation on a conventional keyboard .

for Proxxon or Dremel cutters etc.

The appropriate minimal quantity lubrication system, which is fastened with a fixing screw will fit all CNC milling machines.

It can be operated with eg a small compressor, where a minimal air pressure of 2 bar is necessary. Fine tuning of amount and air pressure can be adjusted via nozzle as well as switch.

All tubing is made of stainless steel and therefore resistant to corrosion. The suction side is equipped with a filter. If extensions are needed, ordinary plastic tubing or appropriate high pressure tubing can be used.

An ordinary ‘biker drinking flask’ is sufficient to use as a vessel.

The minimal quantity lubrication system will be used most when dealing with soft materials which are difficult to mill, such as aluminium in pure form or copper.

These materials can not dispense a minimal lubricating system!

he set of 3 high quality collets from Germany enjoys a high concentricity and high quality materials!

The collet set consists of 3 clamps with diameters of 3mm, 6mm and 1/8 inch.
With these diameters and the standard delivered with the motor 8mm collet you are ready for the most milling and engraving tools.

Product Features:

Collet set 3 pieces
Fits all Kress spindles
High-quality original German quality, incomparable with many China-imports!
Diameter 3mm, 6mm, 1/8 ", optional 2.35, 4mm and 1/4" stock
Concentricity 0.004 mm
Quality spring steel

The oscillating tangential knife EOT-3 from our assortment is ideal for cutting in materials such as cork, leather, rubber, hard foam, cardboard and many more.
The robust housing and the high-quality components make this cutting module precise in machining and guarantees a long service life.
Due to the standardized euro-neck mounting bracket and the plug connection the installation is quick and simple.

The change magazine with 6-fold HSK-E 25 tool holders. Due to its low weight and compact dimensions, this tool changer is ideal not only for larger, but also for small CNC portal milling machines. The changing station is designed for operation with high-frequency spindles.
Upon request, we also produce changers to individual specifications, let us advise you!