584,800 active members*
4,760 visitors online*
Register for free
Login Register
CNC-STEP Products

We bring precision to the point.

CNC-STEP
Water jet cutting machines

Water Jet Cutter flowJET

CE-certified water jet cutter quipped with high-pressure pump from HAMMELMANN® combined with proven RaptortX-SL machine mechanics. Optionally pumps with 15 kW or 30 kW and flow rates of 2 to 4 l/min are available. With this pump type, you save up to approx. 36% of energy. The water level can be adjusted at the touch of a button so that workpieces can be processed underwater very conveniently. This minimizes the noise level and environmental pollution. Our flowJET waterjet cutting machines are available in different versions. You have the choice of size, pump power and pure water or abrasive system. The pure water system is ideal for cutting materials such as foils, fabrics or rubber. The abrasive system equipped with ALLFI® components, on the other hand, can cut hard materials such as stone, steel, concrete, ceramic tiles or stainless steel.
  • Water Jet Cutter
  • Water Jet Cutting Machine
  • flowJET abrasive system
  • HDP by Hammelmann®
Product details Homepage Product request
Depth controller / Engraving stopper
Depth controller / Engraving stopper
Engraving machine
CNC-STEP GmbH & Co. KG
Water jet cutting machines
2101 0000
The new depth controller by CNC-STEP comes with a linear rail with ball bearing circulation, thus it’s not only smooth-running but also indestructible. The pressure is regulated by means of a spring. Watch this video and see how simple the one-time installation of the depth controller for engraving works is. This video also shows you how simple the engraving stopper for milling works can be clamped. With its open and in the area of hundredths of millimetres depth-adjustable teflon-coated flange it smoothly slides over any material without scratching it. Thus it secures consistent engravings and processing depth for all engraving works and the manufacture of circuit boards/PCBs independent from varying material thickness or variations in the plainness of the table surface. Once mounted, the engraving stop never needs to be removed, as in its clamped modus it is adjustable to any milling works due to its high stability.
Product details Homepage Product request
CNC Router High-Z S-400/T: XYZ Table 400 x 300 x 110 mm / Ball Screws WIN, Linux
CNC Router High-Z S-400/T:  XYZ Table 400 x 300 x 110 mm / Ball Screws WIN, Linux
Portal and Gantry type milling machine
CNC-STEP GmbH & Co. KG
Water jet cutting machines
The High-Z / T allows high precision (repeatability about 0.01 mm) and high speeds of up to 12 meters per minute. Product details CNC Router S-400/T: - Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each - 2 motors for constant tension and compression during milling operation on X-Axis - Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface - Feed through of long workpieces possible, because there?s no belt drive at the end of the X-axle - Ball bearings at both sides of ball screws on X and Y axis - Working speed around 8000 mm/min max. - Traverse speed of rapid feed: max. 12.000 mm/min - Technical resolution : 0,00635 mm ( 1/10 Step ) - Reversal error max.: +/- 10µm ( 0,01mm ) - Table size / clamping area: 730 x 390 mm - Traverse Paths: X=400 mm; Y=300 mm; Z= 110 mm A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
  • Milling machine front
  • Engraving machine Kress motor
  • Engraving machine sideview
  • Ball screws
Product details Homepage Product request
HF spindles / High frequency spindles
HF spindles / High frequency spindles
Milling spindle unit
CNC-STEP GmbH & Co. KG
Water jet cutting machines
For example, we offer various HF spindles. In our assortment you will find among others the Mechatron high frequency spindles of the series: HFSAC, HFS, ATC, DTC and HFP. Standard and industrial models are available. Visit our website for more information on the different models and let our team advise you.
  • ATC-HF-spindle
  • Mechatron spindle
  • ATC-HF-spindle
  • HFS-Mechatron spindle
Product details Homepage Product request
High-Z S-1000 / CNC Router 1000x600 / Windows Linux compatible
High-Z S-1000 / CNC Router 1000x600 / Windows Linux compatible
Portal and Gantry type milling machine
CNC-STEP GmbH & Co. KG
Water jet cutting machines
The large CNC Router Machine / CNC Engraving and Milling Machine for 3D and 2D CNC milling and engraving Details CNC Router S-1000: ?Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each ?2 motors for constant tension and compression during milling operation on X-Axis ?Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface ?Feed through of long workpieces possible, because there?s no belt drive at the end of the X-axle ?Ball bearings at both sides of ball screws on X and Y axis ?Working speed around 3000 mm/min max. ?Traverse speed of rapid feed: max. 4.000 mm/min ?Technical resolution : 0,003 mm ( 1/10 Step ) ?Reversal error max.: +/- 30µm ( 0,03mm ) ?Table size / clamping area: 1330 x 690 mm ?Traverse Paths: X=1000 mm; Y=600 mm; Z= 110 mm A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
  • Emergency-Stopp-Button
  • Accurate workmanship
Product details Homepage Product request
High-Z S-1400/T CNC Router / CNC Engraver 1400 x 800 x 110 mm / Ball Screws / Linux, Windows
High-Z S-1400/T CNC Router / CNC Engraver 1400 x 800 x 110 mm / Ball Screws / Linux, Windows
Portal and Gantry type milling machine
CNC-STEP GmbH & Co. KG
Water jet cutting machines
The machine series is designed for commercial and industrial applications. Product details: Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each 2 motors for constant tension and compression during milling operation on X-Axis Guide ways X 30mm diam. and Y axle 22 mm diam./ Z Axis 16mm, grinded and with 61hrc hardened surface Feed through of long workpieces possible, because there?s no belt drive at the end of the X-axle Ball bearings at both sides of ball screws on X and Y axis Working speed around 7.500 mm/min max. Traverse speed of rapid feed: max. 8.500 mm/min Technical resolution: 0,00635 mm ( 1/10 Step ) Reversal error max.: +/- 10µm ( 0,01mm ) Table size / clamping area: 1730 x 880 mm Traverse Paths: X=1400 mm; Y=800 mm; Z= 110 mm A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
  • y-axis z-axis
Product details Homepage Product request
High-Z S-1400/T-105: CNC Router / CNC Machine 1400 x 1100 x 110 mm / Ball Screws / Linux, Windows
High-Z S-1400/T-105: CNC Router / CNC Machine 1400 x 1100 x 110 mm / Ball Screws / Linux, Windows
Portal and Gantry type milling machine
CNC-STEP GmbH & Co. KG
Water jet cutting machines
The affordable large XL CNC milling machines with deformation-resistant aluminum frame. Product details: - Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each - 2 motors for constant tension and compression during milling operation on X-Axis - Guide ways X 30mm diam. and Y axle 22 mm diam./ Z Axis 16mm, grinded and with 61hrc hardened surface - Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle - Ball bearings at both sides of ball screws on X and Y axis - Working speed around 7.500 mm/min max. - Traverse speed of rapid feed: max. 8.500 mm/min - Technical resolution: 0,00635 mm ( 1/10 Step ) - Reversal error max.: +/- 10µm ( 0,01mm ) - Table size / clamping area: 1730 x 110 mm - Traverse Paths: X=1400 mm; Y=1100 mm; Z= 110 mm A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
  • High quality ball screws
Product details Homepage Product request
PlasCUT-1350 Plasma Cutter
PlasCUT-1350 Plasma Cutter
Plasma jet cutting machines
CNC-STEP GmbH & Co. KG
Water jet cutting machines
PlasCUT-1350 Plasma Cutter
The plasma arc cutting equipment High-Z PlasCUT-1350 is suitable for plasma arc torching as well as milling wood, PVC, etc. Delivery is complete with above shown base frame including connecting pieces and two pull-out drawers for water fillings. With a movement speed of a maximum of 2.5 meters per minute during operation, it processes all sliceable metallic materials up to 16 mm. Connection for exhaust systems available on the backside. Wavy-arranged, exchangeable supporting plates. Stable construction. Usable for milling works on wood, PVC, etc. Can be loaded from the side or from the top without any problem. Due to the contact surface of 1650 x 1200 ideal for plate standard format of 1500 x 3000, cut in three parts. Traverse paths of the machine: Plasma operation: 1350 x 1050mm. Milling operation:1400 x 1050mm.
  • Plasma cutter
  • Bridge plasma cutting system
  • View drawers
  • Connection extraction system
Product details Homepage Product request
RaptorX-SL Large CNC Router Machine 2200/S15 with 2200 x 1510mm traverse path
RaptorX-SL Large CNC Router Machine 2200/S15 with 2200 x 1510mm traverse path
Portal and Gantry type milling machine
CNC-STEP GmbH & Co. KG
Water jet cutting machines
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available.It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter).This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.Considering our new concept of working with an "invisible" motor for the X-axis and the proven high performance of the entire machine, we will not have to wait long for imitators in the industry to try copy this. A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
  • XXL portal system
  • good workmanship
  • overseas transport
  • CNC-STEP ships worldwide
Product details Homepage Product request
T-Rex 1215 CNC Milling Machine: 1200x1500mm / WINDOWS and LINUX
T-Rex 1215 CNC Milling Machine: 1200x1500mm / WINDOWS and LINUX
Portal and Gantry type milling machine
CNC-STEP GmbH & Co. KG
Water jet cutting machines
By using helical toothed racks, the T-Rex CNC milling machine achieves fantastic precision and an almost immeasurable backlash. Included: KinetiC-NC control software, CNC control, control panel, multi-zone vacuum table, manual central lubrication, ConstruCAM-3D CAD-CAM software, Estlcam. Poduct data: Drive: brand stepper engines Possibility of sliding through long and up to 120mm high materials, no belt drive at the end of the X-axis! Linear guide on the X and Y axis by HIWIN/ THK/PMI Rapid traverse max. ca. 17,000 mm/min Operating speed max. ca. 12,000 mm/min Backlash maximal approx. 0,015 mm Repeat accuracy approx. 0,01 mm Clamping surface 2530 x 1320 mm Travels: X=2500mm; Y=1300mm; Z= 200 mm A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
Product details Homepage Product request