General | |
2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate | |
Working area | |
Swing diameter over bed | 650 mm |
Swing diameter over X linear guideways | 370 mm |
Max machining diameter | 320 mm |
Clamping chuck Ø | 250 mm |
X travel | 250 mm |
Y travel | +/-50 mm |
Z travel | 550 mm |
Distance between spindle noses | 800 mm |
Main drive 1 | |
Type of main drive | AC |
Drive power (100% DC) | 13 kW |
Drive power (40% DC) | 14 kW |
Speed range | -5500 rpm |
Torque (100% DC) | 171 Nm |
Max. torque (40% DC) | 192 Nm |
C-Axis Speed | 100 rpm |
Torque of C-Axis (holding torque) | 168 Nm |
Work spindle | |
Spindle nose | A2-6 |
Spindle diametre on front bearing | 120 mm |
Spindle bore | 73 mm |
Bar diameter max. | 65 mm |
Tool holder 1 | |
Number of tool stations | 12 |
Number of driven tools | 12 |
Speed max. | 6000 rpm |
Power max. (40% DC) | 4,6 kW |
Relieve cycle | Retraction of the axes at your fingertips in the end positions (only for outside machining) By pressing a button, the X-axis drive in manual mode on the positive end positions. Prepare for use as a rescue function or around the work area to set up. |
Pre-setting package w. spray gun & Alt speed | Pre-setting package: Option includes: - manual tool measuring probe made by MARPOSS - chip conveyor with right side discharge instead of chip tank - coolant spray gun 5 bar - signal lamp with 4 colours - technology cycle Alternating Spindle Speed |
12 bar/coolant set (with double cartridge filter) | 12 bar coolant set Option includes: - high pressure pump 12 bar; - double cartridge filter for coolant When one filter is stuck (warning on cnc), operator can manually switch the coolant flow to the second one and clean or change the plugged filter witho |
3-jaw chuck, BBD 210-66, make SMW | 3-jaw power clamping chuck with through-hole, type BBD 210/66, make SMW-Autoblok, incl. connecting elements |
Food switch for tailstock operation | Foot switch for tailstock operation |
Set of three driven tool holder for V3/V4 by Algra | Set of driven tool holders made by ALGRA with VDI 30 shaft for V3/V4 versions for ER 25 collets for drilling/milling operations Option includes: - 2x driven tool holder 0° ER 25 - 1x driven tool holder 90° ER 25 (with offset) - 1x wrench for set-up of h |
Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
Service Agent | Service Agent Overview of all maintenance work on the machine |