NLX 2500|700 (Reference-Nr. 071779)

•  
  Reference number 071779

  Manufacture Year 2022

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Lathes
• Type of Machine
  CNC lathes (4 or more axes)
• Manufacturer
  DMG MORI
• Control
  Mitsubishi
• Description
  
  

  General
  CNC Turning Centre; Control: Control M730UM with CELOS
  Characteristics
  Max machining diameter	330 mm
  Dimensions (L x W x H)	3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) m
  Drive power main spindle	18,5/15 kW
  Rapid feed X / Z	30/30 m/min
  Movements X / Z	260/795 mm
  Rotary tool spindle speed	10000 rpm
  Number of tool stations	10
  Speed max.	4000 rpm
  Spindle bore	111 mm
  Bar diameter max.	80 mm
  Max. Turning Length	705 mm
  Weight approx.	5820 Kg

• Specification
  
  

  CELOS - ERGOline Touch	CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p
  (Spindle1)KITAGAWA 10Hollow Chuck BR10A821(SK-OP)	(Left Spindle) KITAGAWA 10-inch Hollow Chuck BR10A821 Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck outer diameter: Ø254 mm (dia.10 inch.) Through-hole diameter: Ø81 mm Gripping diameter: Max Ø254 mm, Min. Ø31 mm Jaw stroke (dia
  (Spindle1)Hollow Cyl.set KITAGAWA 10Hollow Chuck	(Left Spindle) Hollow Cylinder Set for KITAGAWA 10-inch) Hollow Chuck BR10A821 (Bar work capacity dia. 80 mm) (Without Chuck Body) Hollow cylinder and draw bar are included as a set. Chuck is not included. Please see the chuck-cylinder combination diagr
  (Spindle 2) KITAGAWA 6in. Hollow Chuck BR06A521E	(Right Spindle) KITAGAWA 6-inch Hollow Chuck BR06A521E Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck outer diameter: Ø170 mm Gripping diameter: max Ø170 mm, min Ø16 mm Jaw stroke (diameter): 5.5 mm Plunger stroke: 12 mm Max allow
  (Spindle2)Solid Cyl.set KITAGAWA 6Hollow Chuck	(Right Spindle) HOWA Solid Cylinder set for KITAGAWA 6 inch Hollow Chuck BR06A521E (without chuck body) Solid cylinder and draw bar are included as a set. Chuck is not included. Please see the chuck-cylinder combination diagram for the combination with
  12-st.bolt-tightened turret (standard specific.)	12-Station Bolt-Tightened Turret (Standard Specification) (Y, SY, SMC) In-house 12 station turret. Please refer to the axis travel diagrams and turret interference diagrams for the movable region. Number of tool stations: 12 Shank height for square tool:
  Alternating speed	Alternating Speed It can suppress regenerative chattering by fluctuating spindle speed. The cycle is automatically calculated only by setting the fluctuation width in the guidance screen. *Regenerative chatter is created by excitation resulting from the
  Islands, open pockets	Islands, Open Pockets Islands - The island shape can be defined in a pocket shape. Even complex tools path can be converted in shorter time. - Number of island shape definitions: 127 Open pocket - The island shape can be defined in an open pocket shape
  Multi-counter display	Multi-counter display Multi counter display is used to control the number of machined workpieces. Each time the M2000 to M2020 commands written in a program are read, the counter increments the count. Register the setting values on the MULTI COUNTER scr
  Chip conveyor (right discharge)	Chip conveyor (right discharge, hinge type) (/700) Chips are loaded onto hinge type plate and discharged to outside of the machine. Effective in discharging long chips. Not suitable to discharge minute powdery chips generated when machining cast or gun
  High-pressure coolant system 1 MPa (1,1 kW, 50Hz)	High-Pressure Coolant System (50Hz Area: 1 MPa (1.1kW)/60Hz Area: 1.5 MPa (2.2kW)) It improves the chip removing performance in cutting and the tool/workpiece cooling capability. The pump for supplying coolant to the turret is changed to the high-press
  EtherNet/IP Interface	EtherNet/IP I/F I/F for exchanging control signals between the machine and peripheral equipment using the EtherNet/IP communication protocol. It is necessary for connecting the peripheral equipment that supports EtherNet/IP. The wiring is saved compare
  Workpiece conveyor for workpiece unloader	Workpiece Conveyor for Workpiece Unloader (Built-In Type) (500) (/700) It receives a completed workpiece ejected from the workpiece unloader and discharges it to the right side of the machine. The conveyor operates in conjunction with the workpiece unlo
  Chuck foot switch (double) for main/ sub spindle	Chuck foot switch (double) for main and sub spindle
  IoTconnector	IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)
  NETservice	NETservice A software installed on IoTconnector for qualified support by Internet- based remote diagnostics
  Machine Data Connector (MDC)	Machine Data Connector (MDC) A software installed on IoTconnector for uniform machine data interface as an integrated function of the DMG MORI Connectivity Hardware
  Dry anchor	Dry Anchor The machine is fixed to the floor to minimize the movement due to vibration during operation or small earthquakes. Generally, factories with concrete 500 mm (19.69 inch.) or more in thickness does not require foundation work. However, please

• State
  Used

I like it 0