CLX 550 TC (Reference-Nr. 071782)

•  
  Reference number 071782

  Manufacture Year 2025

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Universal turning-/milling center; Control: CELOS X with Siemens SINUMERIK ONE
  Working area
  Swing diameter over guide ways	580 mm
  Turning diameter	550 mm
  Max. Turning Length	1600 mm
  Bar diameter max.	104 mm
  Work spindle (left)
  Spindle bore	118 mm
  Spindle diametre on front bearing	160 mm
  Main drive 1
  Drive power (100% DC)	32 kW
  Drive power (40% DC)	36 kW
  Speed range	- 4000 rpm
  Bench speed	510 rpm
  Torque (100% DC)	600 Nm
  Max. torque (40% DC)	720 Nm
  Turning-milling spindle
  Spindle taper	HSK-T 63
  Spindle speed	-12000 rpm
  Drive power (100% DC)	8,8 kW
  Drive power (40% DC)	10,5 kW
  Torque (100% DC)	73 Nm
  Torque (40% DC)	90 Nm
  locking moment	800 Nm
  Swivelling range	+/- 120 degree
  Tool magazine
  Type of magazine	Chain
  Number of tools	30
  Max. tool diameter	78 mm
  Max. tool-Ø with free adjacent pockets	130 mm

• Specification
  
  

  Counter spindle ISM 102, A2-8	Counter spindle as integrated spindle motor, ISM 102, A2-8 - Drive power 32/36 kW (S1-100%ED / S3-40%ED) - Torque 600/720 Nm (S1-100%ED / S3-40%ED) - Speed range 0-4.000 min-1 - Partial hollow clamping device Ø104 mm (4 in) - C-axis and spindle b
  Hollow clamping device Ø 104 mm	Hydraulic hollow clamping device Ø104 mm for machining bar material - Pullforce at P max 45 bar: 110 kN - Max. allowed speed: 3600 rpm
  Upgrade dyn. two-pressure, MS	Dynamic two-pressure clamping at the control for the main spindle The clamping pressure can be specified by NC program Note: This text module is an upgrade for the clamping pressure adjustment CLX 450 TC: Upgrade to COMPLETE equipment line CTX beta 45
  Upgrade dyn. two-pressure, CS	Dynamic two-pressure clamping at the control for the counter spindle The clamping pressure can be specified by NC program Note: This text module is an upgrade for the clamping pressure
  3-jaw chuck BBD 315/122 make SMW	3-jaw power clamping chuck with through-hole, type BBD 315/122, make SMW-Autoblok incl. connecting elements
  3-jaw chuck, BBD 315-122, make SMW	3-jaw power clamping chuck with through-hole and fine serration Type BBD 315-112, SMW, with one set of base and hard top jaws, incl. connecting elements - Max. speed 3200 rpm - Max. clamping force 145 kN - Max. actuating force 50 kN - Serration 1/16 x
  Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
  Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
  BFU 8/20 bar, 600 l	Compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (CTX gamma TC 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
  Extended supply line of the belt filter unit	Extended tubes and cables (11 m) for a left-sided installation of the belt filter unit.
  Chuck rinsing device, outside, main spindle	Chuck rinsing device for main spindle, outside
  Chuck rinsing device, outside, counter spindle	Chuck rinsing device for counter spindle, outside
  Coolant supply through the counter spindle	Coolant supply through the counter spindle
  Window rinsing of the security window	Window cleaning of the security window of the working area door by compressed air (Remark: The employment of coolant can limited the view on the workpiece at machining)
  Workpiece touch probe RMP40, Renishaw	Workpiece touch probe RMP40, Renishaw - Interchangeable in turning/milling spindle - Probe reception and tracer point with data transfer between probe and receiver by radio signals - Incl. measuring cycle package Inspection Plus Notes: - Custom meas
  Calibration device RMP40, Renishaw	Calibration device for the workpiece touch probe RMP40 from Renishaw Scope: magnetic base holder and a polished ground calibration ball (Ø 25 mm), packed in a carrying case Note: Only in connection with workpiece touch probe RMP40
  Tool measuring device RP1, Renishaw	Tool measuring device RP1, Renishaw Automatic 5-way tool measurement in the machine by means of touch cubes to avoid measuring and transmission errors. Precise measurement of tool length and tool diameter for stationary tools (turning tools). The measure
  Drill breakage control function for RP1, Renishaw	Drill breakage control function for RP1 from Renishaw
  Protection Package	Protection Package consisting of: - MPC 1.0 - Macine Protection Control - Easy Tool Monitor 2.0
  Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
  Automation interface Profinet (incl. Robo2Go)	Electrical interface Standard Profinet for Robo2Go Note: Special operating mode 3 / emerizing operating mode is not possible in connection with the electrical interface
  DXF-Reader for Siemens	DXF-Reader for Siemens direct on the control for the import of DXF-files as contour or position sample. - support of layer and colours - selection of geometry elements
  OP Workbench	OP Workbench is a browser-based software tool for the graphically supported, control-neutral design, creation and modification of the NC program by means of multi-touch gestures for single- and dual-channel CNC machine tools. Preconfigured and user-friend
  3D Shopfloor Programming	3D shopfloor programming is a function to support shop floor oriented programming based on the 3D models (STEP) loaded into the control. The control analyzes the existing component characteristics features and fills in all relevant cutting cycles of the
  Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
  Run-time monitor	Graphic display of the program runtime (main and idle times) of up to 3 channels on the control system
  Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
  Measuring Pro	A package of measuring cycles from Gildemeister Drehmaschinen GmbH for in-process measurement on turning/milling machines with probes from Renishaw or BLUM. The package includes cycles for calibration or for fast and reliable measurement on turning and tu
  cClamp	Technology cycle for calculating the optimum clamping force with the functions: - Minimum clamping force - determination of the minimum clamping force according to VDI 3106 - Clamping of thin-walled components - determination of the maximum clamp
  Package for tropical climate (ambient temp.50ºC)	Package for tropical climate for ambient temperature of max. 50ºC, consisting of cooling system for control cabinet (until 50º) and machine
  3D data model of working area on CD (Step a.IGES).	3D data model of working area of specified machine as data format Step and IGES. Delivery of 3D data model will be by CD.

• State
  Used

I like it 0