CTX beta 1250 TC (Reference-Nr. 071752)

•  
  Reference number 071752

  Manufacture Year 2025

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  - Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate
  Working area
  Swing diameter over guide ways	500 mm
  Turning diameter	500 mm
  Max. Turning Length	1200 mm
  Bar diameter max.	65 mm
  Work spindle (left)
  Spindle nose	Flat flange
  Diametre of spindle nose	170h5 mm
  Spindle bore	87 mm
  Spindle diametre on front bearing	130 mm
  Turning-milling spindle
  Spindle taper	HSK-A 63 DIN 69893
  Spindle speed	-12000 rpm
  Drive power (100% DC)	19 kW
  Drive power (40% DC)	22 kW
  Torque (100% DC)	85 Nm
  Torque (40% DC)	120 Nm
  locking moment	850 Nm
  Main drive 1
  Drive power (100% DC)	25 kW
  Drive power (40% DC)	32 kW
  Speed range	- 5000 rpm
  Torque (100% DC)	280 Nm
  Max. torque (40% DC)	360 Nm
  Floor space/Weight
  Dimensions (L x W x H)	5,86 x 2,07 x 2,3 m
  Weight approx.	12000 Kg

• Specification
  
  

  Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
  5-axis simultaneus machining	5-axis simultaneous machining
  Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
  Program state control	With the program state control of the part state is retained on the control and / or influenced. Particularly suitable for multi-channel machines.
  Tool sort cykle	Order of the tools in the chain magazine according to the respective call in editing program. Time-optimized sort in chain magazine by using the shuttle instead of the spindle. No relocation of multitools.
  3D quickSET extension package	3D quickSET extension package for each further machine - For review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - Requires 5-axis simultaneous machining Only in combination with measuring prob
  OP Workbench	OP Workbench is a browser-based software tool for the graphically supported, control-neutral design, creation and modification of the NC program by means of multi-touch gestures for single- and dual-channel CNC machine tools. Preconfigured and user-friend
  Chuck rinsing device, mainspindle	Chuck rinsing device for main spindle, outside
  Chuck rinsing device, subspindle	Chuck rinsing device for subspindle, outside
  Clamping pressure adjustment, motor-adj. valves MS	Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program
  Clamping pressure adjustment, motor-adj. valves CS	Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program
  Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
  Bar machining package ø 77 mm	- part catcher with conveyor belt removal to the left for parts up to Ø 75 mm x 200 mm max. component weight 6 kg - hydraulic hollow clamping attachment Pullforce 72 kN at pmax 45 bar inner dia. of draw tube max. 77 mm Tie-rod not accordin
  Counter spindle ISM 52	Counter spindle as integrated spindle motor ISM 52 (instead of tailstock) - Sync motor - Drive power (100%/40% d.c.) 12.5/14.5 KW (16.76/19.44 hp) - Torque (100%/40% d.c.) 170/200 Nm 125.37/147.5 lb*ft - Speed range 0-6000 rpm - Partial hollow clampin
  Extension of the discharge chute about 300 mm	Extension of the discharge chute at the chip conveyor about 300 mm
  BFU 8/80 bar, freq. con., 980 l, cooler	Compact coolant system, consisting of: - coolant tank, 980 litre - 8 bar/80 litre/min   and 80 bar/11 litre/min (theoretical pump performance) with frequency-controlled pumps   programmable via M- and H-functions   coolant supply   turning/milling
  Angled coolant nozzles for turn-milll spindle	Angled coolant nozzles for the turn-mill spindle for cooling short tools
  Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
  Chain magazine for 48 tools HSK-A 63	Tool magazine, 48-fold chain magazine with double gripper with cam drive instead of tool disc magazine, tool reception HSK-63A DIN 69893. only with Siemens control. Surcharge
  Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
  Workpiece touch probe TC62, BLUM	Workpiece touch probe TC 62, BLUM - Dimensions basic body (excl. stylus length): L= 62 mm (2.4 in), Ø= 40 mm (1.5 in) - Interchangeable in turning/milling spindle - Sending and receiving unit with probe tip - Incl. cycle package Quickstart
  Sensor package Industry 4.0	Sensor package Industry 4.0 for holistic condition monitoring with visualization in Condition Analyser App and analysis of the machine and the machining processes (Attention: The DMG Mori Condition Analyser App is not part of this option)
  Automation interface Profinet (no Robo2Go)	Electrical interface Profinet for 6-axes robot Note: Special operating mode 3 / operating mode grinding is not possible in connection with the electrical interface
  Package for tropical climate (ambient temp.50ºC)	Package for tropical climate for ambient temperature of max. 50ºC, consisting of cooling system for control cabinet (until 50º) and machine
  Window rinsing of the security window	Window cleaning of the security window of the working area door by compressed air (Remark: The employment of coolant can limited the view on the workpiece at machining)
  3D data model of working area on CD (Step a.IGES).	3D data model of working area of specified machine as data format Step and IGES. Delivery of 3D data model will be by CD.
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine

• State
  Used

I like it 0