Excentric turning and milling operation | Excentric turning and milling operation (only with Siemens control) |
5-axis simultaneus machining | 5-axis simultaneous machining |
Interpolation turning | Turning-recessing cycle Manufacture of simple sealing Surfaces and grooves using turn/mill centers |
Counter spindle centre | Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery |
Technologie cycle alternating speed | Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control) |
Polygon Turning | Polygon Turning for machining of elliptic and polygonal shapes on end faces Note: Only in combination with option B-A0326 Excentric turning and milling operation |
Program state control | With the program state control of the part state is retained on the control and / or influenced. Particularly suitable for multi-channel machines. |
Tool sort cykle | Order of the tools in the chain magazine according to the respective call in editing program. Time-optimized sort in chain magazine by using the shuttle instead of the spindle. No relocation of multitools. |
gearSKIVING 2.0 | Technology cycle for machining of straight, helical or convex (convex only for external gears) internal or external gears with conical shaped skiving tools up to module 4 (CTX TC / TC 4A) module 2 (CTV DF) |
Broaching | Technology cycle with dialog-guided programming for the production of any keyways according to DIN6885 or driving grooves according to DIN138 with standard tools. This option contains the technology cycle with the corresponding input mask. |
Y-Axis Parting | Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and |
3D quickSET (with toolkit) | 3D QuickSET for turn-mill machines - Toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - For review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - Requires 5- |
ATC | Application Tuning Cycle ATC - Demand-oriented adjustment of axis dynamics for machining tasks: accuracy (contour accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial for turning-milling operations (2+1 / 3+2 / 5-axis simultaneous) |
Reduced price, ATC | Reduced price, selection of ATC and 5-axis simultaneous machining |
Multi-thread cycle 2.0 | Multi-thread cycle 2.0 Cycle to create position orientated threads with free contours, pitches and free number of threads, e.g. for big transmission or special threads. Targeted overlapping of threads with cross-holes, e.g. redirection systems with ball |
Chuck rinsing device, mainspindle | Chuck rinsing device for main spindle, outside |
Chuck rinsing device, subspindle | Chuck rinsing device for subspindle, outside |
Turn./mill. spindle, 20.000 rpm | Turning-/milling spindle with increased spindle speed, instead of standard - Max. spindle speed 20.000 rpm - Power 19/22.5 kW (25.5/30.2 hp) (S1-100%d.c. / S3-40%d.c.-2min) - Torque 85/120 Nm (64.2/88.5 lbxft) (S1-100%d.c. / S3-40%d.c.-2min) |
Tailstock function for counter spindle | Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC |
Bar machining package ø 77 mm | - part catcher with conveyor belt removal to the left for parts up to Ø 75 mm x 200 mm max. component weight 6 kg - hydraulic hollow clamping attachment Pullforce 72 kN at pmax 45 bar inner dia. of draw tube max. 77 mm Tie-rod not accordin |
Counter spindle ISM 52 | Counter spindle as integrated spindle motor ISM 52 (instead of tailstock) - Sync motor - Drive power (100%/40% d.c.) 12.5/14.5 KW (16.76/19.44 hp) - Torque (100%/40% d.c.) 170/200 Nm 125.37/147.5 lb*ft - Speed range 0-6000 rpm - Partial hollow clampin |
Hinged type chip conveyor | Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min |
BFU 8/20 bar, 980 l, cooler | Compact coolant system, consisting of: - coolant tank, 980 litre 8 bar/20 litre/min (CTX beta 2000 TC, CTX gamma TC 2nd: 8 bar/80 l/min) and 20 bar/25 litre/min (theoretical pump performance) programmable via M-functions coolant supply through |
Chain magazine for 48 tools HSK-A 63 | Tool magazine, 48-fold chain magazine with double gripper with cam drive instead of tool disc magazine, tool reception HSK-63A DIN 69893. only with Siemens control. Surcharge |
Automatic actuation of sliding cover, electrical | Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible) |
Workpiece touch probe TC62, BLUM | Workpiece touch probe TC 62, BLUM - Dimensions basic body (excl. stylus length): L= 62 mm (2.4 in), Ø= 40 mm (1.5 in) - Interchangeable in turning/milling spindle - Sending and receiving unit with probe tip - Incl. cycle package Quickstart |
Sensor package Industry 4.0 | Sensor package Industry 4.0 for holistic condition monitoring with visualization in Condition Analyser App and analysis of the machine and the machining processes (Attention: The DMG Mori Condition Analyser App is not part of this option) |
Electrical interface for Robo2Go | Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as |
IoTconnector | IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice) |
Machine Data Connector | Machine Data Connector (MDC) Uniform machine data interface. |
NETservice | NETservice Qualified support by Internet-based remote diagnostics |
Messenger V4 | Messenger V4 Clear presentation of the machine live status. |
Service Agent | Service Agent Overview of all maintenance work on the machine |