Automatic swivel milling head | Universal head: automatic changeover from vertical to horizontal machining |
Prod. package 40 bar/23 l/min | Coolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump |
NC rotary table with pallet changer | Type of Measuring system Direct measuring system |
| Table surface 1000 x 800 mm |
| Centre bore 50H6 mm |
| Maximum load (table centre) 1500 Kg |
Cabine | Full protection cabin |
| 4. Axes (swivelling range) 360 x 0,001 degree |
| Rotation speed max.4. Axis 30 rpm |
| Distance between T-Slots 100 mm |
| Number of Slots 7 |
| Slot width 18 mm |
Integrated motor spindle, 12,000 rpm | Integrated motor spindle SK 50, 12,000 rpm |
| Type of main drive Integrated motor spindle |
| Drive power (100% DC) 32 kW |
| Speed range -12.000 rpm |
| Torque (40% DC) 288 Nm |
| Torque (100% DC) 187 Nm |
| Drive power (40% DC) 44 kW |
| Spindle taper HSK-A 100 |
Tool magazine,chain,120 pockets | Tool magazine chain magazine with 120 magazine pockets |
Spindle taper HSK-A 100 | Spindle taper for HSK-A 100 to DIN 69893 (incl. taper cleaning, adaptation working spindle, tool changer and tool magazine) |
Infrared measuring probe Heidenhain | Infrared measuring probe Heidenhain TS 640 The measuring probe is changed out of the tool magazine automatically into the working spindle |
Tool measuring in machining area Blum Laser NT-Hybrid | Tool measuring in machining area Type Blum Laser NT-Hybrid automatic retraction of the measuring unit in a protected housing tool length and tool diameter measuring in horizontal/vertical position |
3D quickSET extension package | 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools) |
2 pressure steps for internal coolant supply | 2 Druckstufen für IKZ-Kühlmittelanlage 40 bar/23 l/min, 80 bar/15 l/min (theoretische Pumpenleistung) anwählbar über NC-Programm |
Oil and emulsion mist separator | Oil and emulsion mist separator electrostat filter |
MCIS-TDI Tool management | MCIS-TDI Tool management, Determination of tool usage |
Spray pistol with pump | Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance) |
Cooling by air blast | Cooling by air blast through spindle centre, selection with M function |
Special equipment | - Feed drives X-/Y-/Z-axis with liquid cooling - Additional air conditioner with 3 kW, placed separately beside the machine. |