DMC 340 U (Reference-Nr. 020315)

•  
  Reference number 020315

  Manufacture Year 2018

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Universal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Internal coolant supply 40 bar / 580 psi through spindle centre (AD) - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	3400 mm
  Cross	3400 mm
  Vertical	1600 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/30000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/30/40 m/min
  Tool changer
  Application	Universal
  Type of magazine	shelf
  Tool changer plane	vertical
  Type of gripper	Double gripper

• Specification
  
  

  	Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betwee
  Universal head with controlled B-axis	Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining as well as automatic changeover from vertical to horizontal machining
  Cabine	Full protection cabin
  Motor spindle HSK-A 100, 15,000 1/min, 52 kW,404Nm	Motor spindle HSK-A 100 Spindle speed 20 - 15,000 min-1 Output 52 kW / 42 kW (70 hp / 56 hp) Torque 404 Nm / 280 Nm (298 ft lbs / 206 ft lbs) (40 / 100 % duty cycle) SGS Spindle Growth Sensor Adaption magazine HSK-A 100
  Taper cleaning brushes	Taper cleaning unit with rotating brushes for spindle taper HSK
  Tool magazine, Wheel, 243 pockets	Tool magazine Wheel magazine (4 wheels) with 243 tool pockets SK 50 or optionally chosen spindle taper
  ICS 80 bar,frequency controlled	Internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm through spindle centre (AD) (theoretical pump performance) Stepless pressure programming by NC program
  Spray pistol with pump	Spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Infrared measuring probe Renishaw	Infrared measuring probe Type Renishaw OMP 60 SK 50 or optionally chosen spindle taper
  3D quickSET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe)
  Tool identification (TDS)	Tool identification (Tool Dialogue System TDS) Type Balluff, data carrier BIS C-122-04/L Reading writing station at the tool magazine Reading/Writing manually, contactless with chip
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Laminated safety glass	Laminated safety glass for window in right cabin door
  Machine version for pit	Machine preparation for installation in a pit, deep of the pit 1.400 mm / 55,12 in.
  Special equipment	- Mechanical preparation for accuracy package remains in the machine - Increased accuracy is eliminated
  MDynamics package	Deckel Maho package MDynamics Improved surface quality combined with reduced machining time
  Special equipment	Linear Scales Make Heidenhain (instead of Magnescale) Automatic opening/closing of the Work room door Camera Remote System with additional Screen on the control panel Oil/Emulsion Mist Separation System ISI Cobaron with vacuum gauge 2x pallet design c
  Special equipment	Surcharge for wireless probes RENISHAW RMP 60 with HSK-A 100 interface Adaptation of the coolant system, all Electrical connections pluggable carried out Control cabinet lighting with Schuko socket 230V / 6 A, connected in front of the main switch Spec

• State
  Used

I like it 0