DMC 340 U (Reference-Nr. 020316)

•  
  Reference number 020316

  Manufacture Year 2022

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Heidenhain
• Description
  
  

  General
  Universal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/30000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/30/40 m/min
  Working area 1
  Longitudinal	3400 mm
  Cross	3400 mm
  Vertical	2000 mm
  Tool changer
  Type of magazine	Wheel
  Tool changer plane	vertical
  Type of gripper	Double gripper

• Specification
  
  

  	Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betwee
  Universal head with controlled B-axis	Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining as well as automatic changeover from vertical to horizontal machining
  Cabine	Full protection cabin
  Extension Z travel range to 2,000 mm	Extension of Z-traverse to 2,000 mm / 78.7 in
  Motor spindle, 9,000 rpm, 54 kW, 700 Nm	Motor spindle powerMASTER® HSK-A 100 Spindle speed 20 - 9.000 min-1 Output 77 kW / 54 kW (103 hp / 72 hp) Torque 1,000 Nm / 700 Nm (737 ft lbs / 516 ft lbs) (15 % - 2 min /40 % - 10 min duty cycle) SGS Spindle Growth Sensor
  Spindle taper HSK-A 100	Spindle taper for HSK-A 100 to DIN 69893 (incl. air blast taper cleaning, adaptation working spindle, tool changer and tool magazine)
  Stop block + 3-point-support	Stop block + 3-point-support Design according to DECKEL MAHO Standard
  Taper cleaning brushes	Taper cleaning unit with rotating brushes for spindle taper HSK
  Pallet version bore pattern for basic machine	Pallet version bore pattern base machine Clamping surface to DIN 55201-A1 Tapped bushing M24, grip 200 mm /7,87 in
  Tool magazine, Wheel, 243 pockets	Tool magazine Wheel magazine (4 wheels) with 243 tool pockets SK 50 or optionally chosen spindle taper
  ICS 80 bar,frequency controlled	Internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm through spindle centre (AD) (theoretical pump performance) Stepless pressure programming by NC program
  Oil and emulsion mist separator	Oil and emulsion mist separator Mechanical filter Throughput volume: 6,000 m³/h
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Infrared measuring probe Heidenhain	Infrared measuring probe Type Heidenhain TS 460 SK 50 or optionally chosen spindle taper
  Tool breakage control mechanical	Tool breakage control mechanical version
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Tool identification (TDS)	Tool identification (Tool Dialogue System TDS) Type Balluff, data carrier BIS C-122-04/L Reading writing station at the tool magazine Reading/Writing manually, contactless with chip
  MPC - Machine Protection Control	MPC - Machine Protection Control Machine protection by quick shutdown
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  Signal lamp 4 colours	Signal lamp with 4 colours red: general error yellow: intervention required green: machine in automatic operation blue: machine in set-up operation
  Rotary Pallet Storage RPS 4 incl. 2 pallets	Rotary Pallet Storage RPS 4 incl. 2 pallets 2,000 mm x 2,500 mm / 78.7 in x 9.4 in (4 pallets in total for machine with storage)
  Pallet version bore pattern for RPS 4	Pallet version bore pattern for pallet rotary storage RS 4 Clamping surface to DIN 55201-A1 Tapped bushing M24, grid 200 mm /7,87 in
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/ surface/ speed
  Safety package for power failure	Safety package for power failure: Voltage control with fast deceleration trigger Controlled shut down of the control Display of last executed program number
  Active Chatter Control ACC	Active Chatter Control ACC Improved surface quality combined with reduced machining time, increased tool lifetime
  Special equipment	- Mechanical preparation for accuracy package remains in the machine - Increased accuracy is eliminated
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  SERVICEcamera	SERVICEcamera Camera set incl. accessories (Antenna, charger, incl. SD card)
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	Hose and cable extension set 8m

• State
  Used

I like it 0