DMU 125 FD DUOBLOCK (Reference-Nr. 040838)

•  
  Reference number 040838

  Manufacture Year 2020

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Univ. Milling / Turning Machining Centre; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Working area 1
  Longitudinal	1250 mm
  Cross	1250 mm
  Vertical	1000 mm

• Specification
  
  

  Universal head with controlled B-axis HSK-A 100	continuously positioning universal milling head (B-axis) with integrated motor spindle for 5-axis positioning and simultaneous machining swivel angle: from horizontal position to max. 210° (swiveled 30° past vertical position to the left - viewed from
  Integrated motor spindle speedMASTER®	Drive power (100% DC) 32 kW
  	Drive power (40% DC) 44 kW
  	Torque (100% DC) 187 Nm
  	Torque (40% DC) 288 Nm
  	Speed range - 12000 rpm
  	Spindle taper HSK-A 100
  	Clamping System HSK-A 100
  Coolant supply	coolant through spindle centre form AD, 40 bar/23 l/min Multi-jet unit at milling head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output 70 l/min jets for chip rinsing in cabin roof, pump output 150 l/min with non-return
  Chip removal	2 worm conveyors in the machine bed convey into a cross conveyor (jointed-band conveyor) with interval control (suitable for long-chipping material). discharge height: 950 mm / 37.4 in width: 380 mm / 14.9 in
  Oil mist separator	Machine working space extraction
  Cabine	Full protection cabin
  NC mill-turn table d 1,250 mm / d 49.2 in	number of T-slots: 1x cross slot 18 H7 / 0.71 H7 12x star slots 18 H11 / 0.71 H11 / 22.5° centre bore: d 50 mm H6 / d 2 in H6 max. torque: 5,400 Nm / 3,979 ft lbs (100% duty cycle) holding momentum: 6,200 Nm / 4,570 ft lbs (hydraulic table clamping) driv
  Stop block + 3-point-support	Stop block + 3-point-support Design according to DECKEL MAHO Standard
  Taper cleaning brushes	Taper cleaning unit with rotating brushes for spindle taper HSK
  Tool magazine, wheel, 123 pockets HSK-A100	Tool magazine wheel magazine (2 wheels) with 123 tool pockets HSK-A100
  Operation panel for loading station tool magazine	Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit
  Infrared measuring probe Renishaw HSK-A 100	Infrared measuring probe Type Renishaw PP60 optical (OMP 60) HSK-A 100
  Tool measuring in machining area Blum Laser FD	Tool measuring in machining area Blum Laser DIGILOG Automatic retraction of measuring device in a protective housing, Laser-system for milling tools, 3D touch-probe for turning tools
  3D quickSET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe)
  Sensor package i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  Maintenance Package I4.0	Maintenance Package I4.0: - measurement of tool pull-in force - autom. lubrication of tool clamp - monitoring of pneumatics
  Grinding package	Grinding package - upgrade motor spindle with accoustic emission sensor - static dressing unit - coolant unit 1,300 l/ 343 gal with centrifuge - machine protection for grinding operations - grinding and dressing cycles
  Tropical package (ambient temp. max. 50 °C)	Package for tropical climate for ambient temperature at machine location from 35° to 50° Celsius
  Interpolation turning	Interpolation turning Turning-recessing cycle Manufacture of simple sealing surfaces and grooves using Machining Centres. For Siemens control only in horizontal and vertical plane
  Safety package for power failure	Safety package for power failure: Voltage control with fast deceleration trigger Controlled shut down of the control Display of last executed program number
  Increased precision package	Increased precision package: Retrofitting of cooled axisdrivemotors X/Y/Z as wellas cooled ball bearing screw
  3D data model	3D data model in STEP format for integration in a CAD system by the customer. It is used for machine simulation. (Data basis in component structure)
  IoTconnector	IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)
  NETservice	NETservice Qualified support by Internet-based remote diagnostics
  Machine Data Connector	Machine Data Connector (MDC) Uniform machine data interface.
  Messenger V4	Messenger V4 Clear presentation of the machine live status.
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	Use of angular milling head in tilted working plane Adaption of the tool table for machining with angular milling heads. With this option the angle head can also be used in a tilted working plane. The input of the tool data is done by the customer in the
  Special equipment	Angular milling head measured with Blum Laser Set up of the CHC control for measuring angular milling heads with a Blum Laser . Activation of the use and measuring of different tools (length and diameter) in the angular head. Requirements : Angular mil

• State
  Used

I like it 0