DMU 65 monoBLOCK (Reference-Nr. 010972)

•  
  Reference number 010972

  Manufacture Year 2021

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Universal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  Working area 1
  Longitudinal	735 mm
  Cross	650 mm
  Vertical	560 mm
  Tool changer
  Tool changer plane	vertical
  Type of gripper	Double gripper
  Number of tools	90
  Max. tool length	315 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	160 mm
  Floor space/Weight
  Weight approx.	12400 Kg

• Specification
  
  

  NC swivel rotary table integrated in rigid table	Type of Measuring system Direct measuring system
  	Table surface 800 x 650 (Ø 650) mm
  	Centre bore 50 mm
  	Maximum load (table centre) 600 Kg
  	Rotation Speed 5. Axis 20 rpm
  	5. Axes (swivelling range) +120/-120 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 40 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 9
  	Slot width 14 mm
  Integrated motor spindle speedMASTER®	Drive power (100% DC) 25 kW
  	Spindle taper HSK-A 63
  	Speed range - 15000 rpm
  	Torque (40% DC) 130 Nm
  	Torque (100% DC) 86 Nm
  	Drive power (40% DC) 35 kW
  	Clamping System HSK-A 63
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Tool magazine, chain vert., 90 pockets	Tool magazine Vertical chain magazine basic with 90 tool pockets
  Spindle taper HSK-A 63	Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine)
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Infrared measuring probe Heidenhain	Infrared measuring probe Type Heidenhain TS 460 SK 40 or optionally chosen spindle taper
  Tool measuring in machining area Blum Laser	Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically
  Rotating clear-view window	Rotating clear-view window cabin door
  Production package 40 bar/23 l/min, 600 l tank	Production package: Scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) Exter
  TCC Tool Control Center basic HSK-A63	TCC Tool Control Center basic HSK-A63 - Detection of soiling at the tool interface - Spindle protection by monitoring the max. forces - Determination of the tool pull-in force
  TCC Tool Control Center advanced	TCC Tool Control Center advanced - Extension of the functional scope of the option TCC basic - Tool- and workpiece protection - Visualization of the cutting symmetry - Machine Protection Control MPC
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  EROWA Automation Interface PH 150 / PH CELL	Automation interface PH 150 / PH CELL for EROWA zero-point clamping system consisting of: - Interface (Profibus) via M65 - Working table with 4-channel rotary transmission - Automatic lifting door - Control of EROWA (MTS / UPC) Zero-point clamping s
  Price reduction for automation from DMG MORI	Price reduction on automation interface with simultaneous order of a DMG MORI Automation solution
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Interface for Oil and emulsion mist separator	Interface mechanical and elektrical for oil- and emulsion mist separator
  Tropical package (ambient temp. max. 50 °C)	Package for tropical climate for ambient temperature of max. 50° Celsius at machine location
  Control cabinet lighting with power outlet	Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  Machine Data Connector	Machine Data Connector (MDC) Uniform machine data interface.
  IoTconnector	IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)
  Machine documentation on CD-ROM	Machine documentation on CD-ROM operating instructions, programming instructions
  Safety package for power failure	Safety package for power failure: Voltage control with fast deceleration trigger Controlled shut down of the control Display of last executed program number
  NETservice	NETservice Qualified support by Internet-based remote diagnostics
  Messenger V4	Messenger V4 Clear presentation of the machine live status.
  Service Agent	Service Agent Overview of all maintenance work on the machine
  PH CELL	PH Cell pallet loading and unloading system with handling system and pallet rack system - Handling system with pallet gripping system, Transfer weight max. 300 kg (pallet with load) - 1 shelf module with 3 shelve floors and up to 15 storage poc
  2 x Aluminum pallet 400 x 400, bore pattern, EROWA MTS	2 x Aluminum pallet 400 x 400 mm incl. clamping pins compatible for clamping station EROWA MTS Bore pattern M12, Grid 50 mm incl. EROWA- pallet coupling for gripping by pallet handling device
  2 x Aluminum pallet 400 x 400, smooth, EROWA MTS	2 x Aluminum pallet 400 x 400 mm incl. clamping pins compatible for clamping station EROWA MTS Smooth surface incl. EROWA- pallet coupling for gripping by pallet handling device
  EROWA MTS zero point clamping station	EROWA MTS zero point clamping station with clamping modules for pallet size 400 x 400 and 500 x 500 mm
  Signal lamp with 4 colours	Signal lamp with 4 colours red: general error yellow: intervention required green: machine in automatic operation blue: machine in set-up operation
  Set-up station rotable	Set-up station rotatable manual 4 x 90°
  1 Additional set of documents in paper form	1 additional set of documents: operating and programming instructions in paper form
  Pallet Management - Control Comfort Plus	Control Comfort Plus includes additional to the basic version different options more, to ensure a better utilization and flexibility of the automation cell. - Zero point displacement of the pallets - Selection of multiple different NC-programs for one p
  CE - Conformity	CE conformity for the complete system (automation with machine tool)

I like it 0