501,832 active members
6,660 visitors online
Register for free
Login Register
Schneider Messtechnik - Banner

Schneider Messtechnik

Products
Shaft measuring machine WMM 100 / WMM 200
Shaft measuring machine WMM 100 / WMM 200
Shaft measuring machine
Dr. Heinrich Schneider Messtechnik GmbH
Shaft measuring machines
100 / 200 mm
60 mm
WMM 100 and 200 - Measurements made easy!

Thanks to a large field of view (100 x 60 mm) and a 16 megapixel CCD camera, an accurate and repeatable result can be achieved in seconds, by any user. Based on our proven and reliable SAPHIR software, SAPHIR shaft focuses on the essentials needed to program the shaft measurement process. In the truest sense of the word: Simply precise!

Standard equipment for the WMM 100 and 200
• Image fi eld 100 x 60 mm
• 16 megapixel CCD camera
• Touchscreen panel PC
• Table top design

Highlights of the WMM 100 and 200
• Simple and quick measurements in seconds
• Intuitive user interface
• Reproducible measurement results
• Calibration in accordance with ISO 10360-7
Product details Homepage Product request
Shaft measuring machine WMM 300 / WMM 450
Shaft measuring machine WMM 300 / WMM 450
Shaft measuring machine
Dr. Heinrich Schneider Messtechnik GmbH
Shaft measuring machines
With the standard machines from the WMM series, you have the ability to measure rotationally symmetrical parts up to 450 mm in length and a maximum diameter of 150 mm. In just one operation, lengths and diameters, radii, angles, chamfers, as well as all the required geometric and positional tolerances, can be identifi ed, measured and reported.

Fast measurements, simple operation and the SAPHIR measurement and analysis software make this system the preferred partner for your workshop and measurement room. The distinct advantage over comparable systems is its high measurement accuracy, not only for diameters but also lengths, radii, chamfers and smallest contour details. Furthermore, there is the option to precisely measure blind bores, grooves and other contours and elements not measurable in transmitted light, using incident light. Should this prove insuffi cient, a TP200 6-way touch-trigger probe can be integrated from WMM 300 and a SP25 scanning probe from WMM 450. The 2D shaft measurement machine then becomes a 3D shaft measurement machine.

The mathematically integrated CNC rotation axis and the option of individually illuminating the measurement point with the switchable sector incident light guarantee a complete and consistently precise measurement. There are also no additional measurement devices required when carrying out the complete measurement with the shaft measurement machine. Both time and money are saved thanks to the elimination of transport and handling.
  • Shaft measuring machine WMM 300
Product details Homepage Product request
Shaft measuring machine WMM 600 to WMM 2200
Shaft measuring machine WMM 600 to WMM 2200
Shaft measuring machine
Dr. Heinrich Schneider Messtechnik GmbH
Shaft measuring machines
600 bis 1200 mm
200 / 400 mm
All in one - the WMM series reduce your throughput times!

With the standard machines from the WMM series, you have the ability to measure rotationally symmetrical parts up to 450 mm in length and a maximum diameter of 150 mm. In just one operation, lengths and diameters, radii, angles, chamfers, as well as all the required geometric and positional tolerances, can be identifi ed, measured and reported.

Advantages of the WMM series
• Fully integrated CNC rotation axis with holder for SK40, SK50, HSK63 or support of a customer-specifi c interface
• Sector incident light for measuring bores, grooves, oil channel bores, blind holes and milling contours
• Optionally with a touch-trigger or scanning probe for special form measurements, such as gears, non-cylindrically symmetric contours, impellor wheels, etc.
• Digitisation and best-fi t for 2D and 3D measurements
• Optionally available: Fixturing/holding tools such as live and dead centres in standard and special designs, precision vices and chucks, female centres, etc.
• SAPHIR shaft – the shaft measurement software is setting the standard

Special features for the WMM series
• Measurement length up to 2200 mm and diameter up to 400 mm
• Ultra-fast measurement technology thanks to triggered measurements with a high-resolution CCD matrix camera and live images
• High-precision measurement of lengths through camera focal axis, even outside the middle axis
• Teach-in programming
• Automatic generation of a measurement log with table and graphics, as well as initial sample test report according to VDA
• Special customer-specifi c solutions available
Product details Homepage Product request
Shaft measuring machine WMM 65
Shaft measuring machine WMM 65
Shaft measuring machine
Dr. Heinrich Schneider Messtechnik GmbH
Shaft measuring machines
Shaft measuring machine WMM 65
65 x 52 mm
Turned parts measured in seconds!

The WMM 65 modular optical measurement system can be confi gured to meet the demanding requirements of your quality assurance procedures. Due to its fl exible design the WMM 65 can be integrated into a production line or standalone workstation. With an adaptable workpiece holder and software connections positioned on the process side full network capability is possible.

WMM 65 Standard Equipment
• 5 megapixel CMOS B/W camera
• Telecentric lens for precise measurements
• 23.6’’ multi-touch panel PC with Windows operating system
• LAN and WLAN network connection
• Telecentric LED transmitted light illumination
• Green LED light and fi lter for reducing interferences
• Calibration certifi cate
• SAPHIR measurement and analysis software with SAPHIR shaft

WMM 65 Optional Features
• Customer-specifi c measurement ranges
• Motorised and digitised rotation axis
• Fixturing/holding tools:
- Magnetic holder for workpieces
- Precise manual centring via iris diaphragm
- Six-jaw chuck
• I/O module for connection of automated handling systems
Product details Homepage Product request
WMB 350
WMB 350
Shaft measuring machine
Dr. Heinrich Schneider Messtechnik GmbH
Shaft measuring machines
WMB 350
Intelligent shaft measurement for future digitalised factories

The measurement of static and dynamic features in a matter of seconds guarantees accurate and reproductible measurement results. Implementation directly in production processes is indispensable for ensuring fast measurements and production control. The WMB series was designed and constructed for that specific purpose. Fully automated measurements of rotationally symmetric workpieces can be implemented by any user at the touch of a button thanks to the mathematically integrated rotation axis.

WMB 350 standard equipment
• 5 megapixel CMOS B/W camera
• Telecentric lens for precise measurements
• Multi-touch panel PC with Windows operating system
• LAN and WLAN network connection
• Telecentric LED transmitted light illumination
• Green LED light and fi lter for reducing interferences
• Calibration certifi cate
• SAPHIR measurement and analysis software with SAPHIR shaft

WMB 350 optional equipment
• Motorised and digitised rotation axis
• Clamping tools:
- Magnet holder for workpieces
- Precise manual centring via iris diaphragm
- Six-jaw chuck
• Connection of handling systems and handling robots
• Workstation 130 provides the perfect foundation for WMB 350

A useful option: The 6-jaw precision chuck
In addition to the centre pins for mounting the shafts, a 6-jaw precision chuck with hardened, cut and reversible top jaws is available for clamping workpieces without centre holes. The jaw arrangement can also be used to measure the total length. We would be appy to provide you with information about the extensive range of clamping options.
  • Shaft measuring machine WMB 350
Product details Homepage Product request
3D coordinate measurement machine TMM
3D coordinate measurement machine TMM
Three-dimensional measuring machine
Dr. Heinrich Schneider Messtechnik GmbH
Three-dimensional measuring machines
300 x 200 x 200mm
500 x 500 x 500mm
600 x 800 x 600mm
800 x 1200 x 600mm
1000 x 2000 x 800mm
Bridge-type 3D coordinate measurement machine

The new TMM series is designed to be in the midst of the action – directly involved in the production environment. This is exactly where the TMM demonstrates its strengths and accurately controls the processes for ensuring sustainable product quality. Thanks to the powerful U-SOFT SOLID ultra software package, the TMM is a team player within the automation chain, communicating with all of the integrated systems and thus guaranteeing a smooth process with the highest level of quality. The extensive basic package and high-performance options ensure that the TMM series can be adjusted to the task and environment.

TMM series options
• Scanning probe SP25 with rotating/pivoting head PH10M
• Touch-trigger probe TP200
  • TMM 600
  • TMM 300
Product details Homepage Product request
3D multi-sensor portal measuring machines PMS
3D multi-sensor portal measuring machines PMS
Three-dimensional measuring machine
Dr. Heinrich Schneider Messtechnik GmbH
Three-dimensional measuring machines
400 x 400 x 300mm
500 x 500 x 300mm
600 x 600 x 300mm
700 x700 x 300mm
All models of the PMS series feature a highly flexible design − ideal for measuring workpieces of up to 2000 mm in size

This sturdy portal-type measuring machine has been developed not only for the measurement room, but also for use directly on the shop floor. Thanks to its special design, which allows measurement operations to be performed close to the point of manufacture, ineffective time can be considerably reduced and processes streamlined. PMS thus excels as a great productivity booster and cost saver.

Versatility and value were key factors in the design of the PMS series: The machines feature not only a
high-resolution CCD camera, but also boast a touch-trigger (tactile) or scanning probe and/or an optionally available laser sensor. This equipment makes them appropriate for universal use in a wide variety of industries. An indexing probe head, which allows workpiece positioning at a precise angle or interval of rotation, provides additional options for three-dimensional measurement

Optional features of the PMS series
• Touch-trigger probe TP200
• Scanning probe SP25
• Multi-sector incident illumination (switchable)
• 2D and 3D digitisation/BestFit
• Conoscopic measuring laser
• Motorised indexing probe head PH10
  • PMS Series: Our high-end measurement machine
Product details Homepage Product request
3D multi-sensor portal measuring machines PMS LL
3D multi-sensor portal measuring machines PMS LL
Three-dimensional measuring machine
Dr. Heinrich Schneider Messtechnik GmbH
Three-dimensional measuring machines
High-end device for sophisticated measurement tasks

With the creation of series PMS LL, the development team from Bad Kreuznach has set yet another milestone in the world of metrology. Each sensor of this innovative compact machine provides highest accuracy and precision over a large measurement range. PMS LL uniquely combines maximum reliability with speed and flexibility. It is a high performer with low space requirement!

The modular design of the machines which affords customised configuration options leaves nothing to be desired. Whether you require a high-resolution 1.4-megapixel CCD matrix camera, a telecentric precision lens with fixed focal length, an LED incident light illumination system, a multi-sector LED transmitted light illumination system, an indexing probe head (PH10) either equipped with a 6-way touch-trigger probe (TP200) or with a scanning probe (SP25), a conoscopic laser sensor, for a fully integrated CNC rotary axis – the multi-faceted features of PMS LL and its wide variety of software options will help you make the best choices in terms of cost and efficiency for your particular measuring task.

Optional features of the PMS LL series
• Up to 5-axis CNC control
• Touch-trigger (tactile) probe TP200 with SCR200 stylus change rack
• Scanning probe SP25 with FCR25 flexible change rack
• Motorised indexing probe head PH10 allowing workpiece positioning at a precise angle or interval of rotation
• Segmented (multi-sector) LED incident light
• Coaxial scanning point laser
• Active temperature compensation function for the workpiece and the machine
• 2D and 3D digitisation/BestFit
• Solid granite support for the rotary axis
Product details Homepage Product request
2D optical measuring devices V-CAD 60 / V-CAD 300
2D optical measuring devices V-CAD 60 / V-CAD 300
Measuring instrument, optical
Dr. Heinrich Schneider Messtechnik GmbH
Measuring instruments, optical
65.5 x 55mm and 300/400/500 x 200mm
50 and 200mm
With the 2D optical devices V-CAD 60 and V-CAD 300 the workpiece will be simply positioned anywhere in the image field, touch the screen of the multi-touch panel PC to start the measurement and, in a matter of seconds, you have the final measurement and related report. Quick, simple and reproducible - and setting the standard for precision in this class of equipment.

Standard equipment for the V-CAD 60 and V-CAD 300
• 5-megapixel CCD B/W camera
• Telecentric 4-stage motor zoom
• 4 different image fields for precise measurements
• Telecentric LED transmitted light illumination
• LED ring light illumination for incident light measurement
• Multi-touch panel PC
• LAN and WLAN network connection
• M3 Measurement software
• SAPHIR measurement and analysis software
• Calibration certificate

Special highlights of the V-CAD series
• Automatic recognition of control geometries without pre-selection
• No alignment of workpieces in image field
• 4-stage motor zoom for precise measurement of smallest features
• Measurements every second
• Mobile design
  • 2D optical measuring device V-CAD 60
Product details Homepage Product request
2D optical measuring devices V-CAD 80
2D optical measuring devices V-CAD 80
Measuring instrument, optical
Dr. Heinrich Schneider Messtechnik GmbH
Measuring instruments, optical
76 x 63,5mm
60 mm
The V-CAD 80 machines from Dr. Heinrich Schneider Messtechnik have been developed to deliver fast and precise 2D measurements. In particular, for profiles made of plastic, aluminium, wood, rubber, rubber-metal and metal or stamped parts of any kind, plates, seals, layouts and plenty of other parts – also in series production.

The high-resolution optics of all V-CAD measurement devices guarantee calibrated coverage free from distortion, with a large depth of field. Meaning workpieces up to 60 mm high can be measured without a problem.

Special highlights of the V-CAD series
• Large image fields
• No axis motion, no wear
• High-resolution camera with precise telecentric lenses
• Calibrated coverage free from distortion
• Geometric resolution and coverage determined by combination of camera and lens (see table).
• LED incident light optionally available
Product details Homepage Product request
Workshop microscopes WM1 manual
Workshop microscopes WM1 manual
Measuring microscope
Dr. Heinrich Schneider Messtechnik GmbH
Measuring microscopes
Workshop microscopes WM1 manual
200 x 100 x 100mm
300 x 200 x 200mm
400 x 200 x 200mm
400 x 200 x 200mm
High Tech/Low Budget
Tailor-maide solutions for your measurement tasks for the measuring of stamped, plastic, rubber, milled parts, tools, profiles, boards...

Whether you have your eye on a manual model or on a CNC-operated model of WM1–in either case, you can benefit from Schneider’s powerful software packages SAPHIR and M3! In the entry-level category, the M3 measurement software sets new standards in erms of intuitive design, user friendliness and functionality. If you require particularly smart programming and analysis features, Schneider’s 3D measurement software will be your tool of choice. The CNC model can be optionally expanded into a basic multisensor device by complementing M3 or SAPHIR with a touchtrigger (tactile) probe. Series WM1 by Schneider provides tailor-made solutions that can be fl exibly adapted to your specific needs.

MANUAL MODEL:
• Manual axis motion
• M3 oder SAPHIR software
• High-resolution CCD camera
• 1.5x magnification
• Incident light illumination through LED ring light 4 sectors and 1 ring − separately switchable
• Precision measurement stage with quick-adjustment mechanism for axes X and Y
• Diode laser installed as a positioning aid
• Colour inkjet printer
• TFT flat screen monitor
• Optional: manual zoom lens incl. coaxial incident light illumination

Your benefits
• Camera-based acquisition of measurement data
• Precise edge detection in transmitted or incident light thanks to intelligent image analysis algorithms
• Small size−great performance
• Fast and easy handling combined with impressive measurement precision
  • WM1 Series and WM1 G Series: the highly flexible workshop microscopes
Product details Homepage Product request
Workshop microscopes WM1 CNC
Workshop microscopes WM1 CNC
Measuring microscope
Dr. Heinrich Schneider Messtechnik GmbH
Measuring microscopes
Workshop microscopes WM1 CNC
200 x 100 x 100mm
300 x 200 x 200mm
400 x 200 x 200mm
500 x 200 x 200mm
High Tech/Low Budget
Tailor-maide solutions for your measurement tasks for the measuring of stamped, plastic, rubber, milled parts, tools, profiles, boards etc.

Whether you have your eye on a manual model or on a CNC-operated model of WM1 – in either case, you can benefit from Schneider’s powerful software packages SAPHIR and M3! In the entry-level category, the M3 measurement software sets new standards in erms of intuitive design, user friendliness and functionality. If you require particularly smart programming and analysis features, Schneider’s 3D measurement software will be your tool of choice. The CNC model can be optionally expanded into a basic multisensor device by complementing M3 or SAPHIR with a touchtrigger (tactile) probe. Series WM1 by Schneider provides tailor-made solutions that can be fl exibly adapted to your specific needs.

CNC MODEL:
• CNC-controlled axis motion
• SAPHIR measurement and analysis software
• 3-axis CNC control
• High-resolution CCD (matrix array) camera
• 1.5x magnifi cation
• Incident light illumination through LED ring light, 4 sectors and 1 ring − separately switchable
• Precision measurement stage for axes X and Y
• Diode laser installed as a positioning aid
• Colour inkjet printer
• Joystick and trackball for axis motion control, with fast/slow speed selection
• TFT fl at screen monitor
• Optional: touch-trigger probe TP200
• Optional: motorised zoom lens incl. coaxial incident light illumination
  • WM1 Series and WM1 G Series: the highly flexible workshop microscopes
Product details Homepage Product request
Workshop microscopes WM1 G
Workshop microscopes WM1 G
Measuring microscope
Dr. Heinrich Schneider Messtechnik GmbH
Measuring microscopes
Workshop microscopes WM1 G
700 x 700 x 200mm
700 x 1000 x 200mm
700 x 1500 x 200mm
Precise high-tech measurement machine for the measurement of large-scaled:
• stamped parts
• milled parts
• plastic parts
• rubber parts
• boards

The WM1 G series is build on the principle "customisation by design": models can be really adapted to fit your needs. With the inherently rigid granite base and a compact and ergonomic design, It is fully configurable to suit any budget.

With WM1 G, we have complemented the upper range of our successful series WM1 with a real heavyweight. This hightech tool is THE answer to all your “large-scale” metrological needs – more than 1000 devices sold worldwide speak for themselves! As is customary at Schneider Messtechnik, client needs and expectations were kept in clear focus throughout the development process: A flexible approach to client-specific requirements was as much a matter of course as an ergonomic design ensuring userfriendly operation as well clear cost structures for an affordable investment.

Standard features:
• SAPHIR measurement and analysis software
• 3-axis CNC control
• High-resolution CCD matrix-array camera
• Fixed lens with 1.5-fold magnifi cation (approx. 39-fold magnification on the screen)
• LED ring light for incident light illumination, 4 sectors and 1 ring − separately switchable
• Precision measurement stage made of granite
• Diode laser installed as a positioning aid
• Joystick for axis control (fast/slow speed selection)
• TFT flat screen monitor
• Optional:
- Touch-trigger (tactile) probe TP200
- Motorised zoom lens 0.58x-7x, 8 steps, incl. coaxial incident light illumination
- 4-step zoom lens with a fi eld of view of up to 65 x 55 mm
- Fixed lens with large fi eld of view
  • WM1 Series and WM1 G Series: the highly flexible workshop microscopes
Product details Homepage Product request
Digital projectors DP
Digital projectors DP
Profile projector
Dr. Heinrich Schneider Messtechnik GmbH
Profile projectors
Digital projectors DP
200 x 100 x 100
300 x 200 x 200
400 x 200 x 200
500 x 200 x 200
Digital Projector DP
for Fast and Easy Measurement and Comparison of 2D Workpiece Contours

The administration of templates and overlays takes time and money. The new digital projector developed by Schneider Messtechnik combines the many advantages of the proven projector with the digital image processing and analysis. All you have to do is load your DXF drawing onto the screen and position it accurately over the image of your workpiece. Once the drawing is aligned with the workpiece, it will move in synchrony with table motion so that the user always have in focus the relevant section of the drawing. Another key feature allows the user to define circles, lines and angles directly at the device, which ensures high-quality measurement at top speed. The device is of course also equipped with many other powerful functions, for example with a feature for accurate edge detection

Your benefit
• Integrated overlays, e.g. crosshairs and concentric circles
• User-definable elements such as radii, circles, chamfers, angles
• Reading in of DXF files on a scale of 1:1
• Display of different drawing layers
• Comparison processes complete within seconds
• Intuitive user interface
• Portable design
• Available with different fixed objectives
• LED incident light illumination system
• No instruction required

Special features
• DP software with CCD camera and touch-screen panel PC
• Digital scales in all travel axes
• Upper cross slide with 4 T-grooves
• Table-top design
• Sturdy granite construction
• High-precision measuring stage with non-corroding frame
Product details Homepage Product request
Horizontal measurement projector ST
Horizontal measurement projector ST
Profile projector
Dr. Heinrich Schneider Messtechnik GmbH
Profile projectors
350 x 300 / 450 x 300 / 650 x 300 / 750 x 300
200
Horizontal measurement projectors ST 600 H / ST 750 H / ST 1000 H

Schneider measurement projectors with horizontal optical path are equipped with a highly rigid mechanical stage (XY cross stage). Stage loads of up to 200 kg are measured with the same accuracy and precision as lighter workpieces. Useful clamping fi xtures, such as dead and live centre supports (whether manual, motorised or CNC-controlled) can be easily mounted on the stage.

Standard features
• 600-mm – 1000-mm screen with crosshairs (graticule), depending on the model
• Template holder (support clips)
• Protractor rotatable through 360°, vernier 1’
• Triple revolving nosepiece accommodating different objectives (lenses)
• Measurement range: from 350 x 300 mm to 750 x 300mm, depending on the model
• Stage size: from 750 x 200 mm to 1200 x 200 mm, depending on the model
• Stage with a swivel range of +/- 20°, vernier 10’, for table models R350 and R450
• X, Y and Z axis supported by a needle roller bearing
• Scales with a resolution of 0.1 μm
• Motorisation of all three axes and control via joystick
• Transmitted light and incident light illumination system
• Focusable incident light illumination
• M2 measurement software featuring an edge sensor integrated in the optical path
Product details Homepage Product request
Profile projectors PV 300 / PV 360
Profile projectors PV 300 / PV 360
Profile projector
Dr. Heinrich Schneider Messtechnik GmbH
Profile projectors
Vertical profile projectors PV 300 / PV 360
The perfect choice for reliable measurement of plastic parts, seals and gaskets, dies, profi les and other objects.

Standard features of PV 300
• 300-360 mm projection screen with crosshairs (graticule)
• LED transmitted light illumination

Optional features of PV 300
• Triple revolving nosepiece
• Digital angle display
• 360-mm projection screen
• Measurement stages with larger working (coverage) areas
• Quick-adjustment feature for X and Y
Product details Homepage Product request
Vertical measurement projector MV 360
Vertical measurement projector MV 360
Measuring projector
Dr. Heinrich Schneider Messtechnik GmbH
Profile projectors
200x100mm - 300x200mm - 400x200mm - 500x200mm
For reliable measurement of plastic parts, seals/gaskets, dies, profi les and other objects

State-of-the-art measurement projectors developed by Dr. Heinrich Schneider Messtechnik have earned an outstanding reputation in the world of metrology, setting new standards in terms of accuracy and precision. Designed with consistently high quality, Schneider devices have shown their excellence innumerable times over the past decades. Since speed and precision are key on the shop fl oor and in the measuring room, the well-conceived rigid design of the projectors’ physical structure makes a winning team with their robust functional architecture, which is supported by the M2 measurement software (installed as a standard on a tablet PC) and by a high-precision edge sensor. All projectors have been designed to provide easy and intuitive operation to a broad range of users. Since the devices allow measurement operations to be performed in close proximity to the manufacturing area, effi ciency is maximised whilst non-productive times are greatly reduced. What better way could there be to save time and money?



Standard features of MV 360
• Quick adjustment of the measurement stage
• Measurement range 300 x 200 mm
• 360-mm projection screen with crosshairs (graticule)
• Edge sensor incorporated into the optical path
• LED transmitted light illumination

Optional features of MV 360
• Helix-type swivel option thanks to a pivot-mounted plate superposed on the measuring stage
• LED incident light illumination, dimmable
• Triple revolving nosepiece for fast objective (lens) change
• M3 measurement software with multi-touch panel PC and image processing & analysis functionality (imaging probing system)
• Digital angle display for the rotation function of the projection screen
• Further options are available upon request
Product details Homepage Product request
Vertical measurement projector MV 600 in floor-standing design
Vertical measurement projector MV 600 in floor-standing design
Profile projector
Dr. Heinrich Schneider Messtechnik GmbH
Profile projectors
250 x 125mm
Vertical measurement projector MV 600 in fl oor-standing design
For reliable measurement of stamped parts, profi les, dies, tools and other objects

Standard features of MV 600
• Large-scale display of the workpiece
• Quick adjustment of the measurement stage
• Triple revolving nosepiece accommodating different objectives (lenses)
• 600-mm projection screen with engraved crosshairs (graticule)
• LED transmitted light illumination

Optional features of MV 600
• M3 measurement software with multi-touch panel PC and image processing & analysis functionality (imaging probing system)
• LED incident light illumination, dimmable
• Digital angle display for the rotation function of the projection screen
• Laterally displaced column and SK50 manual rotation axis for measurement of tools with large diameters
• Telecentric objectives (lenses) from 5- to 100-fold magnifi cation
• Further options are available upon request
Product details Homepage Product request
Vertical measurement projector ST
Vertical measurement projector ST
Profile projector
Dr. Heinrich Schneider Messtechnik GmbH
Profile projectors
Vertical measurement projector ST
300 x 200 / 400 x 200 / 400 x 300 / 500 x 200
200
Vertical measurement projectors ST 600 V / ST 750 V / ST 1000 V

Schneider measuring projectors with vertical optical path are equipped with a highly rigid mechanical stage (XY cross stage). Thanks to a special glass plate, workpieces weighing up to 20 kg can be directly positioned on the glass plate. Useful clamping fi xtures, such as dead and live centre supports (whether manual, motorised or CNC-controlled) can be conveniently mounted on the stage.

Standard features
• 600-mm – 1000-mm screen with crosshairs (graticule), depending on the model
• Template holder (support clips)
• Protractor rotatable through 360°, vernier 1’
• Triple revolving nosepiece accommodating different objectives (lenses)
• Measurement range: from 300 x 200 mm to 500 x 200 mm, depending on the model
• Stage size: from 600 x 440 mm to 800 x 440 mm, depending on the model
• X, Y and Z axis supported by a needle roller bearing
• Scales with a resolution of 0.1 μm
• Motorisation of all three axes and control via joystick
• High-performance LED transmitted light and LED incident light illumination system
• Focusable incident light illumination
• M2 measurement software featuring an edge sensor installed in the optical path
Product details Homepage Product request
Measurement software M2
Measurement software M2
Software for evaluation and analysis
Dr. Heinrich Schneider Messtechnik GmbH
Software for evaluation and analysis
Measurement software M2
Intuitive multi-touch application for profile or measurement projectors

With the M2 measurement software, Dr. Heinrich Schneider Messtechnik is setting new standards in handling and precision for the manual measurement of geometric parameters using a profile or measuring projector.

Inspired by smartphone and tablet applications, an intuitive multi-touch application has been developed that can be learned in a minimum of time. The software impresses with a clear user interface – without hidden sub-menus. Measured elements are shown true-to-scale in the partial view. Designs and relations are created by simply touching the measured elements in the plot. Comprehensive tolerance checks of the elements to DIN/ISO and clearly structured data protocols are also integrated.

The M2 measurement software naturally also supports an optional edge sensor in order to achieve even more accurate measurement results, or the use of a foot pedal (optional) for recording of measurement points or as an enter key for calculation of an element.
Creation of the measurement programmes

The measurement routine is automatically saved in a programme. For repeat measurements, simply press the "Programme run" button and the measurement starts. A graphic interface guides the operator with direction arrows to the stored measurement points.
Product details Homepage Product request
Measurement software M3 with image processing
Measurement software M3 with image processing
Software for evaluation and analysis
Dr. Heinrich Schneider Messtechnik GmbH
Software for evaluation and analysis
Precise manual measurement of geometric elements using the intuitive multi-touch application

• Clearly structured user interface
• No hidden submenus
• Innovative edge algorithm

Just touch and measure

With the M3 measurement software, Dr. Heinrich Schneider Messtechnik is setting new standards in handling and precision for the precise, manual measurement of geometric elements using camera-based measurement devices in the entry-level class.

Inspired by smartphone and tablet applications, an intuitive multi-touch application has been developed that can be learned in a minimum of time. The software impresses with a clear user interface – without hidden sub-menus – and an innovative edge algorithm for quick and reproducible measurement point identification.

Very simple dimensioning of the measured features and their recording – in graphic and tabular form – are standard functions. Comprehensive tolerance checks of the measured elements to DIN/ISO are naturally also integrated.

M3 measurement software – the intuitive multi-touch application for video-based measurement technology

Just touch – and measurement is finished. The easily learned and clear user interface impresses with its simplicity. No nested menus, no tedious mouse selection- Just measure and analyse.
Product details Homepage Product request
SAPHIR 3D Measurement software
SAPHIR 3D Measurement software
Software for evaluation and analysis
Dr. Heinrich Schneider Messtechnik GmbH
Software for evaluation and analysis
SAPHIR 3D Measurement software
The control centre for your quality assurance -Interface between man and machine

This concept had the highest priority during the development of the SAPHIR 3D measurement and analysis software. The implementation capability into the complete range of multisensor measuring machines, workshop microscopes, optical measurement devices and measuring and profile projectors and the complete integration into existing environments vouch for the high flexibility and adaptability of SAPHIR. Since 1983, the software has been continuously optimised by our development team to meet the changing demands of the market, and new functions are integrated with great far-sightedness. SAPHIR is today one of the most widely recognised products for this field of application. The measurement software certified by the German Federal Institute of Physics and Metrology (PTB) impresses with its clear structure and simple operation. Thanks to its structure, SAPHIR is extremely reliable, highly flexible and offers multisensor capability for universal application.
Cost reduction thanks to multisensor

The detail determines the precision of the whole system – but for the rational measurement of the detail, the choice of the right measurement sensor is absolutely crucial. The SAPHIR 3D measurement and analysis software was designed to meet these demands from the outset and uniquely permits the use of a wide range of sensors in one software package. No matter whether you have to measure coarse of finely toleranced, matt or polished, bright or dark workpieces, the right sensor is available at all times. Black/white or colour camera for incident light and transmitted light measurement, programmable LED sector incident light illumination, tactile or scanning probes (alternatively with swivel head system) or a high-precision measuring laser are the elementary preconditions for purposeful and cost-optimised use of the measuring machine. All the sensors can be automatically changed and employed during the measurement routine without having to stop or change the measuring programme. One software for all sensors – efficient and user-friendly to allow the operator to concentrate fully on the measurement application.
Exactly!

Too short at the back, too long at the front – with 2D and 3D BestFit, you always get things right. Optimum integration of the measured actual data into the 2D target data dictated by DXF. This allows you to make optimum use of the tolerances. As an option, 3D formats such as CATIA, AutoCAD (DWG), 3DStudio (.3ds), Lightwave (.lwo), Step (.stp, .step), RawTriangles (.raw), STL (.stl), VDA (.vda), VRML (.vrml, .wrl), Wavefront (.obj), PDF (.pdf, .ai, .eps) and TXT (.txt) can also be processed. A BestFit is possible with both the 2D model sections obtained and with summarised control geometries and 3D free-form surfaces.
Paperless quality assurance

You’re sure to have heard of it, but have you seen it in reality? Automated reporting ensures documented quality with every measurement – completely without paper! The results can be stored and further processed directly as PDF files via the network in the predefined server locations. These include:

- Initial sample inspection report
- Graphic report
- Test report

Quick learning of the SAPHIR measurement software thanks to workshop-oriented measurement

- The result is obtained in a small number of steps
- The intuitive user guidance simplifies learning
- Automatic measurement of unknown contours is possible
- Circles and straight lines are detected automatically
- Clearly structured user interface simplifies measurement
- Quick creation of automated measurement programmes
- No programming know-how required for creation of the programmes
- Measuring programmes are displayed in plain text in a tree structure
- Macros, subroutines and loop programming simplify creation of the programmes for continuous measurement tasks
- Graphic representation of all measured elements and resulting design of new elements with identification of the measured values
Product details Homepage Product request
SAPHIR QD measurement software
SAPHIR QD measurement software
Software for evaluation and analysis
Dr. Heinrich Schneider Messtechnik GmbH
Software for evaluation and analysis
SAPHIR QD measurement software
Revolution of an innovation

An innovation should start with the first action – not with the result. That is why SAPHIR QD measurement and analysis software can be intuitively operated and provides perfect measurement results with just a few clicks. Simply switch on the measurement device, load the object even without alignment or even the wrong way round – and detection and measurement can start. The report is displayed as an overlay on the live image together with a graphic report.

Multiple measurements – for all those who want everything at once

Whether multiple identical parts or multiple different parts: With the Multiple Measurement identical (MMI) and Multiple Measurement different (MMD), the developers at Schneider Messtechnik have now also integrated the option of multi-part measurement into SAPHIR QD. And the best of all: The software thinks with you. For this reason, the measurement elements can vary without additional intervention, the software scans all the parts in the measurement range. If a part is loaded for which a programme does not yet exist, the software nevertheless goes to work: Detect contour, create CAD drawing, carry out alignment – measure. In short: SAPHIR QD identifies all the elements to be measured and integrates these into the measuring programme at a click. Measurement technology can be that fast!

Special features of SAPHIR QD
• Parts can even be loaded the wrong way round. The part is nevertheless recognised and the measurement performed.
• In addition to single-part measurement, the measurement of multiple identical parts at the same time is possible here (MMi=Multiple Measurement identical), as well as the simultaneous measurement of multiple non-identical parts (MMd=Multiple Measurement different).
• The software scans all the parts in the measurement range.No quantities have to be entered into the controller in advance.
• The contour is immediately detected, even if a part is loaded for which there is no existing program. The software aligns the workpiece automatically and saves the image from the measurement camera for part recognition.
• The measuring programme is automatically created as soon as the dimension arrows are moved to the relevant points of the DXF file.
• Alternatively, the software identifies all the elements to be measured independently with autodimensioning and integrates these automatically into the measuring programme.
Product details Homepage Product request
U-SOFT SOLID ultra
U-SOFT SOLID ultra
Software for evaluation and analysis
Dr. Heinrich Schneider Messtechnik GmbH
Software for evaluation and analysis
U-SOFT SOLID ultra
U-SOFT SOLID ultra. Accurate measurement. Easier. Faster.
Quick single part measurement: 40-60% less input work, half the measurement time

User software in the measurement technology sector must always form an integral part of the production process. It must link the user and measurement device, workpiece and production process, mathematics and technology to form a single tool. Unrestricted, continuous measurement of geometric elements, free-forming surfaces, curves, connections – U-SOFT SOLID ultra is so well designed that only one software application is required for all of the measurement tasks. Everything can be measured from a single interface – simple, workshop-compatible and in accordance with high-end requirements. Thanks to the integrated philosophy and superior, modular structure of U-SOFT SOLID ultra, you can consistently measure the full complexity of your test piece and reflect it accurately without any limitations regardless of its contour, shape and surface.

External parts programme creation:
CAD Offline, according to data record, (standard formats incl.:DXF, IGES, VDA-FS, STEP)

Feature-based test reports:
Easy to understand and operate, simple, comprehensive with graphic display – right from the measurement through to the display of the results, that are generated in the background and are available on an ad hoc basis.

Checking:
You can choose from a variety of test reports that you require for your current task:Target/actual comparison, actual dimensions, actual dimensions plus drawing, dimensions in the drawing, initial sample test report according to VDA, Excel table, etc.

You, too, can benefit from these functions and features:
• Presetting of workpieces or electrodes of machine tools
• Creating learning programs at the test specimen
• 3D Bestfit
• CNC measurement routine
• Graphical user guidance
• Free-form surface against data set
• Loop formation
• Tolerance tables: e.g. H7, J6, etc., and plastics tolerances, etc.
• Pallet measurement
• Geometrical and positional tolerances to DIN/ISO 1101
•Parameter programme creation
•Formula interpreter
•Curve measurement
•Statistics, SPC, Q-DAS
•Special solutions on demand
Product details Homepage Product request
Loading ...