Yes I am using Port 1 on the ESS board. What's making me scratch my head is the external E-Stop button is on pin 10 and it functions correctly.
Results 1 to 7 of 7
Threaded View
-
11-11-2021, 01:16 AM #5
Registered
- Join Date
- Apr 2003
- Posts
- 4
Re: ESS connected to C85 breaker board/driver Homing problem
Reply With QuoteSimilar Threads
-
ESS MB3 Index homing
By Jonatanw in forum SmoothStepper Motion ControlReplies: 5Last Post: 12-30-2020, 10:35 PM -
Homing problem ESS
By squirrel_41 in forum Mach Wizards, Macros, & AddonsReplies: 1Last Post: 11-03-2019, 09:29 AM -
How to use all 8 Axes in Kflop Board Connected with Kanalog Board
By amitkumar171 in forum Dynomotion/Kflop/KanalogReplies: 12Last Post: 09-24-2018, 06:57 AM -
PMDX-107 + PMDX-126 + ESS connected to Huanyang HY02D223B -Newb pulling hair out
By SmokeJaguar in forum Spindles / VFDReplies: 1Last Post: 12-14-2016, 03:10 AM -
24V supply leaps to 35V when driver board connected!
By HankMcSpank in forum Stepper Motors / DrivesReplies: 6Last Post: 08-26-2008, 10:27 PM
Tags for this Thread
Posting Permissions
