464,973 reg. members
EROWA
270
Following

EROWA Products

EROWA CleverClamp
EROWA CleverClamp
Workpiece fixing device
EROWA AG
Workpiece fixing devices
EROWA CleverClamp
EROWA CleverClamp system - the flexible workpiece clamping system for machining

EROWA CleverClamp system is the modular and integrated workpiece clamping system. Easy to use, versatile in use.
CleverClamp base rails mounted directly on the machine table, a clamping Tower, a palette, etc. They are also can be used thanks to the standardised interface durchgänig in the EROWA UPCs, and MTS palletizing system.

Technical data
Fits the following clamping systems: EROWA UPC, MTS
Use without EROWA clamping system possible: Yes
Applications: heavy and light machining, grinding
Material: Nitrided steel
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA CTS (Collet Tooling System)
EROWA CTS (Collet Tooling System)
Chucking system
EROWA AG
Chucking systems
EROWA CTS (Collet Tooling System)
Collet clamping system for the watch industry, as well as fine and medical technology

Everywhere, the lot sizes in production are small. This also applies to the watch industry, the precision engineering and medical technology. Shortest changeover times changing the variant are the goal. For many forms, even if they are not Rotationally symmetrical, a Collet Chuck is the optimum restraint.

The CTS system «Collet tooling system» we give a defined reference position in all axes the collets. The advantage: after changing the version of the reference point is known also. The processing can be started immediately.

Technical data:
Collet size: Max ø 60 mm
Repetition accuracy: 0.002 mm
Clamping force: 4'000 N
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA FTS (Fine Tooling System)
EROWA FTS (Fine Tooling System)
Chucking system
EROWA AG
Chucking systems
EROWA FTS (Fine Tooling System)
The precise clamping system for the micro-mechanism with low construction height

The importance of the main time parallel disarmament does not depend on the size of the work pieces. Rather, it is the cost of switching from one lot to the next, which significantly affected the productivity of machines. Even with very small parts, machines, which are designed for fine and finest edits the Setup outside of the machine can be a key success factor for the production.

The FTS fine ToolingSystem clamping system is specifically adapted to these circumstances. It helps with the positioning accuracy of less than 0.002 mm and with the extremely flat design optimally exploit the editing room of small machines.

Technical data:
Pallet size: ø 68 mm
Repeating accuracy: less than 0.002 mm
Clamping force: 400 N
Monitoring: Yes
Cleaning function: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA ITS (Integrated Tooling System)
EROWA ITS (Integrated Tooling System)
Chucking system
EROWA AG
Chucking systems
Versatile clamping system for the erosion and machining

The EROWA ITS Chuck uses a technique as simple as ingenious. It keeps both tools such as factory pieces with unique precision stable and repetieren accurate. Its uses are so versatile that it is the basis to a sophisticated modular clamping system.

Tens of thousands of ITS daily worldwide are chucks in use. With the guaranteed 2-µm precision and reliability in practice.

Milling, grinding and drilling machines, lowering and EDM equipment or measurement and before lots are integrated, the ITS help with week Chuck week, capitalize the production hours.

Technical data:
Pallet size: Max ø 148 mm
Repetition accuracy: 0.002 mm
Clamping force: Max 7'000 N
Monitoring: Yes
Cleaning function: Yes
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA MTS (Modular Tooling System)
EROWA MTS (Modular Tooling System)
Chucking system
EROWA AG
Chucking systems
Modular clamping system for the machining

EROWA MTS (modular tooling system) is an open clamping system. For use there are different possibilities: single palletizing with a MTS Chuck, or multiple palletising with several MTS chucks. The MTS Chuck be mounted directly on the machine table or integrated into base plates.

Technical data:
Pallet size: Variable
Repeating accuracy: 0.005 mm
Clamping force: 12'000 N/clamping pot
Locking force > 60 ´ 000 N/clamping pot
Monitoring: Yes
Cleaning function: Yes
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA PC 210 (Production Chuck 210)
EROWA PC 210 (Production Chuck 210)
Chucking system
EROWA AG
Chucking systems
Clamping system with Central material implementation and voltage on the outer ring for the machining

The EROWA ProductionChuck 210 on ingenious ways the proven EROWA combines accuracy with the flexible handling of a palletizing system, which is required in the modern production of part of. Closing mechanism lying on the perimeter ensures bore a stable connection between Chuck and Palette.Die ø 81 mm allows it, Central making material. This is a big advantage when the workpiece machining lathes and apparatus of part of.

The system is suitable for palletising work pieces with a volume up to 400 x 400 x 400 mm.

Technical data:
Pallet size: ø 210 mm
Repeating accuracy: less than 0.002 mm
Clamping force: 30'000 N
Trailer bar: Yes
Monitoring: Yes
Cleaning function: Yes
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA PM Tooling (Powder Metallurgy Tooling)
EROWA PM Tooling (Powder Metallurgy Tooling)
Chucking system
EROWA AG
Chucking systems
The clamping system for single - or multi-level powder presses to convert dies in the shortest time

Powder pressed parts are becoming increasingly sophisticated and increasing the variety of product forms. The lot sizes are smaller, therefore the powder presses must be upgraded to often.

EROWA has the solution to minimize changeover times:
Single - or multi-level powder presses are equipped with the appropriate PM tooling clamping system. Dies can be replaced thus within very short time and with the utmost precision.

Technical data: range size: Max ø 195 mm
Repeating accuracy: less than 0.002 mm
Clamping force: up to 25'000 N
Pressing force: Max 2500 kN
Tractive effort: maximum 300 kN
Trailer bar: Yes
Monitoring: Yes
Cleaning function: Yes
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA PowerChuck P
EROWA PowerChuck P
Chucking system
EROWA AG
Chucking systems
EROWA PowerChuck P
Power operated chucks for clamping of all ITS pallets for EDM applications, as well as for the machining

The power operated chucks are hardly to imagine the production. Whether on milling machines, drilling machines, profile or surface grinders or on the spindles of machines of part of and lathes, it like a glove fits anywhere.

The integration of integrated clamping system on all machine tools completely eliminates downtime.

Technical data:
Pallet size: Max ø 148 mm
Repetition accuracy: 0.002 mm
Clamping force: 10'000 N
Monitoring: Yes
Cleaning function: Yes
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA UPC (Universal Power Chuck)
EROWA UPC (Universal Power Chuck)
Chucking system
EROWA AG
Chucking systems
EROWA UPC (Universal Power Chuck)
Universal clamping system for machining for EROWA UPC (universal power Chuck) beyond the usual boundaries of clamping systems with regard to precision, stability and work piece size. Now, 500 x 500 x 500 mm are no problem. And therefore not greater than 2 µm.

For ITS users is crucial: With the Central ITS Chuck is the seamless integration into the existing system ensured.

Technical data range size: 320 x 320 mm
Repetition accuracy: 0.002 mm
Clamping force: 50'000 N
Monitoring: Yes
Cleaning function: Yes
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Wire EDM Tooling
EROWA Wire EDM Tooling
Chucking system
EROWA AG
Chucking systems
EROWA Wire EDM Tooling
Precision clamping system for all cutting EDM applications

EROWA clamping systems make WEDM plants significantly more flexible and more productive. Downtime can virtually eliminate themselves. Expensive machines can operate around the clock.
Our program includes components for beginners, fitters and «top end»-users. You determine the framework and can only win.

Technical data:
Pallet size: Variable
Repetition accuracy: 0.002 mm
Clamping force: Max 7'000 N
Trailer bar: Yes
Monitoring: Yes
Cleaning function: Yes
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA ClampSet
EROWA ClampSet
Workpiece fixing device
EROWA AG
Workpiece fixing devices
EROWA ClampSet
EROWA ClampSet - consistently and accurately can be used

EROWA ClampSet is the modular system for the precise clamping of workpieces. It can be consistently used in the entire EROWA manufacturing concept. The base Rails manufactured to a high specification and clamping elements allow a very precise positioning of workpieces. ClampSet is ideally suited for the requirements of precision in tool and mold making.

Technical data

Fits the following clamping systems: EROWA ITS UPC, MTS
Use without EROWA clamping system possible: Yes
Area of application: Light machining, grinding, erosion
Maximum part size: 225 mm
Material: Stainless steel
Automatable: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Zentrumspanner
EROWA Zentrumspanner
Workpiece fixing device
EROWA AG
Workpiece fixing devices
EROWA Zentrumspanner
EROWA Center release - stable and flexible for spans

To produce pieces as possible complete and economically, the 5-sided machining in one clamping offers great advantages. The idle times are significantly reduced and failed the re-clamping avoided.
The EROWA Centre is the precise and flexible interface between the workpiece and the machine.

Technical data:
Fits the following clamping systems: EROWA ITS 210 UPC, MTS 400, 500 MTS
Use without EROWA clamping system possible: Yes
Applications: Heavy and light machining, grinding, erosion
Repeating accuracy: 0.01 mm
Maximum part size: 5-155 mm
Material: Stainless steel
Automatable: Yes

This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Mineralgussturm
EROWA Mineralgussturm
Clamping and locating angle
EROWA AG
Clamping and locating angles
EROWA Mineralgussturm
EROWA mineral casting Tower

The whole working area of the machine is used with tombstones. The indisputable advantages of mineral casting are obvious: dampening, light and low thermal conductivity.

Technical data

Fits the following clamping systems: EROWA MTS
Applications: heavy and light machining
Geometric tolerance of M.t.p. holes: 0-500 mm ± 0.01
Flatness: 0.01 mm / 300 mm
Concurrency: 0.01 mm / 300 mm
Angularity: 0.01 mm / 200 mm
Material: mineral cast
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA LiftGear MTS 400
EROWA LiftGear MTS 400
Lifting and transport equipment
EROWA AG
Lifting and transport equipment
EROWA LiftGear MTS 400
EROWA LiftGear - the clever loading aid for palletised work pieces

Heavy pallets must be used accurately in MTS Chuck, on upgrading stations or in robot magazine. LiftGear MTS with a ceiling crane that is easy and secure.

Technical data:
maximum transfer weight: 250 kg
Max work piece sizes: 400 x 450 x 450 mm
Range type: EROWA MTS 400
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA LiftGear MTS 500
EROWA LiftGear MTS 500
Lifting and transport equipment
EROWA AG
Lifting and transport equipment
EROWA LiftGear MTS 500
EROWA LiftGear - the clever loading aid for palletised work pieces

Heavy pallets must be used accurately in MTS Chuck, on upgrading stations or in robot magazine. LiftGear MTS with a ceiling crane that is easy and secure.

Technical data:
maximum transfer weight: 250 kg
maximum workpiece size: 500 x 550 x 450 mm
Range type: EROWA MTS 500
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA LiftGear UPC
EROWA LiftGear UPC
Lifting and transport equipment
EROWA AG
Lifting and transport equipment
EROWA LiftGear UPC
EROWA LiftGear - the clever loading aid for palletised work pieces

Heavy pallets must be used accurately in UPC Chuck on upgrading stations or in robot magazine. LiftGear UPC and a ceiling crane that is easy and secure.

Technical data:
maximum transfer weight: 250 kg
maximum workpiece size: 320 x 380 x 450 mm
Range type: EROWA UPC
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Robot Compact 80
EROWA Robot Compact 80
Tool changers and magazines
EROWA AG
Tool changers and magazines
EROWA Robot Compact 80
Much performance on little space

The EROWA robot compact 80 offers the optimum ratio between the large magazine capacity and the small footprint. The trend of manufacturing automation continues unabated. A range of EROWA filler de helps worldwide many customers successfully to make their production more economically for years. With the new robot compact 80, we set new standards in the field of compact handling devices.

Technical data: maximum transfer weight: 80 kg
maximum length of linear axis: no
maximum number of controlled machine tools: 2 PCs
maximum number of magazines: 3 PCs
maximum number of magazine positions: 300 + PCs
Maximum chip feed: 4 PCs
Swivel axle: Yes / 350°
Loading station: Yes / 2 PCs
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Robot Dynamic
EROWA Robot Dynamic
Tool changers and magazines
EROWA AG
Tool changers and magazines
EROWA Robot Dynamic
For workpiece and electrode handling and processing of all kinds.
Modularly expandable.

The robot dynamic is suitable for loading of large and small workpieces. One of the important features for the automatic production of single parts and small series is that the system automatically between various Palettengrössen.wechselt.

The EROWA robot dynamic can constantly adjust and upgrade. The basic investment is preserved. It is always the right decision to put on the modular concept of the robot dynamic.

Technical data:
maximum transfer weight: 250 kg
maximum length of linear axis: 20 m
maximum number of operated tool machines: 8 PCs
Max Magazine: 8 PCs
maximum number of magazine positions: 1200 PCs
Maximum chip feed: 18 PCs
Swivel axle: Yes
Loading station: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Robot Six
EROWA Robot Six
Tool changers and magazines
EROWA AG
Tool changers and magazines
EROWA Robot Six
The 6-axis robot for raw part and pallet handling, as well as any kind of editing.

Technical data: maximum transfer weight: 500 kg
Linear axis: Length on request
maximum number of controlled machine tools: 30 PCs
Magazine: Rack magazine or project specific
Swivel axle: Yes (integrated)
Loading station: possible
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Robot Dynamic 500
EROWA Robot Dynamic 500
Tool changers and magazines
EROWA AG
Tool changers and magazines
EROWA Robot Dynamic 500
Workpiece and electrode handling serves up to 8 CNC machines transfer weight up to 500 kg

For large and small - the robot dynamic 500 is suitable for loading of large and small workpieces. Automatically switch from the one on the other pallet size is one of the important features in the automated production of single parts and small series.

The EROWA robot dynamic 500 can always adapt and upgrade. More magazine places called? Use a second machine? Integrate a cleaning or a loading station? That's why, this robot is high modular designed.

Technical data maximum transfer weight: 500 kg
maximum length of linear axis: 20 m
maximum number of operated tool machines: 8 PCs
Max Magazine: 8 PCs
maximum number of magazine positions: 1200 PCs
Maximum chip feed: 18 PCs
Swivel axle: Yes
Loading station: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Robot Easy
EROWA Robot Easy
Tool changers and magazines
EROWA AG
Tool changers and magazines
EROWA Robot Easy
For workpiece and electrode handling up to 250 kg.

Easy robot is strongly built. There's hardly a cheaper solution for large workpieces and heavy chunks. The long exit road leaves nothing to be desired.
Within a year, the investments are already brought in. 4000 and more productive hours will be realized with the large expansion of autonomy.

Technical data:
maximum transfer weight: 250 kg
maximum length of linear axis: no
maximum number of controlled machine tools: 1 PCs
maximum number of magazines: 1 PCs
maximum number of magazine positions: 60 PCs
Maximum chip feed: 1 PCs
Swivel axle: No
Loading station: No
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Robot Multi
EROWA Robot Multi
Tool changers and magazines
EROWA AG
Tool changers and magazines
EROWA Robot Multi
For large and small - up to 80 kg on the machine bring small workpieces in large series or large items?

That robot is the EROWA multi.

Different system sizes are often used on same CNC machine. Multimedia automatically switches the robot to the associated palette size.
Clear magazine, up to 270 parts find their defined place. With this supply, the autonomy of a CNC machine is considerably improved.

The return on Investement of EROWA robot multi can be elegantly reduced. He is so situated that it loads two machines.

Technical data: maximum transfer weight: 80 kg
maximum length of linear axis: no
maximum number of controlled machine tools: 2 PCs
maximum number of magazines: 1 PCs
maximum number of magazine positions: 360 PCs
Maximum chip feed: 4 PCs
Swivel axle: Yes
Loading station: Yes
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA Lift
EROWA Lift
Transfer facilities
EROWA AG
Transfer facilities
EROWA Lift
Simply load lift - engines EROWA

The EROWA lift is designed for frequent palette changes directly on the machine or in the handling device. fix mounted next to the machine, he is always there when it's needed. Palletized workpieces are moved safely from pallets and up to the top floor of the robot.

Technical data:
maximum transfer weight: 250 kg
Range type: EROWA ITS 148, ITS 115 PC210, RoboSet, UPC, MTS, AutoPlay
Swivel axle: Yes / Swivel range 360°
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
EROWA CMM Qi mit Metrolog X4
EROWA CMM Qi mit Metrolog X4
Three-dimensional measuring machine
EROWA AG
Three-dimensional measuring machines
EROWA CMM Qi mit Metrolog X4
For quality measurements and before adjustments of any kind. Support of tactile and optical measuring methods, as well as surface scanning

Technical data: measurement uncertainty in the volume on L = 500mm: 1.5 µm + L / 500 (standard) / 0.7 µm + L / 500 (high precision)
Resolution: 0.0001 mm (standard) / 0.00002 mm (high precision)
Maximum travel: 600 mm / 700 mm / 500 mm (X/Y/Z)
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Loading ...
EROWA - Skyscraper