548,308 active members*
1,932 visitors online*
Register for free
Login Register
ETEL S.A. Products
ETEL S.A.
Precision actuators

AQUARIUS SHORT STROKE ACTUATOR

This actuator, AQUARIUS, can be used in any applications where force, throughput, long lifetime and reliability are required within a small form factor. It typically fits with the requirement of independent Z axis for testing handlers.

Main specifications
- Total stroke: 11.4 mm
- Peak force: 120 N
- Continuous force: 29.5 N
- Speed up to 1 m/s
- Acceleration up to 30 g

Ask for the corresponding Integration Manual for more information.
Product details Homepage Datasheet Product request
AQUARIUS ST Short Stroke Actuator
AQUARIUS ST Short Stroke Actuator
Precision actuator
ETEL S.A.
Precision actuators
AQUARIUS ST Short Stroke Actuator
The AQUARIUS ST is the new generation of ETEL?s short stroke actuators primarily dedicated to ?Test & Scan? turret handler applications. Compared to its predecessor the AQUARIUS one, the ST series allows a higher force control repeatability and a higher throughput, reducing the final machine cost of ownership.

In this application, short move and settle time as well as smooth force limitation at low force level are key parameters that can now be fulfilled with less compromise.

The ST version has been mechanically optimized, with fully symmetrical and balanced design, to guarantee long term friction behavior. This design avoids unwanted move and settle variations. The AQUARIUS ST can then cope with smaller nominal forces down to 0.5 N, improve force accuracy, drastically drop the force overshoot and increase the acceleration.

Both encoder and power connectors are mounted at the end of the cables and are compatible with the AccurET Modular 48 position controller.

The use of this short stroke actuator is mostly dedicated to semiconductor back-end ?Final Test? turret handler applications. It will enhance semiconductor device handling through processes as « Pick from Bowl / Tube / Tray », « Transfer to/from Table », « Test Contacting », « Vision Inspection », « Laser Marking » and « Place to Tape / Tube / Tray ».

The ST version not only increases the value proposition of the customers' machines manufacturers, but combined with our electronics and specific software ensure that manufactured chips are properly tested and validated without stress.
Product details Homepage Datasheet Product request
TUCANA ST Short Stroke Actuator
TUCANA ST Short Stroke Actuator
Precision actuator
ETEL S.A.
Precision actuators
TUCANA ST Short Stroke Actuator
The TUCANA ST is the new generation of ETEL?s short stroke actuators primarily dedicated to ?Test & Scan? turret handler applications. Compared to its predecessor the TUCANA one, the ST series allows a higher force control repeatability and a higher throughput, reducing the final machine cost of ownership.

In this application, short move and settle time as well as smooth force limitation at low force level are key parameters that can now be fulfilled with less compromise.

The ST version has been mechanically optimized, with fully symmetrical and balanced design, to guarantee long term friction behavior. This design avoids unwanted move and settle variations. The TUCANA ST can then cope with smaller nominal forces down to 0.5 N, improve force accuracy, drastically drop the force overshoot and increase the acceleration.

Both encoder and power connectors are mounted at the end of the cables and are compatible with the AccurET Modular 48 position controller.

The use of this short stroke actuator is mostly dedicated to semiconductor back-end ?Final Test? turret handler applications. It will enhance semiconductor device handling through processes as « Pick from Bowl / Tube / Tray », « Transfer to/from Table », « Test Contacting », « Vision Inspection », « Laser Marking » and « Place to Tape / Tube / Tray ».

The ST version not only increases the value proposition of the customers' machines manufacturers, but combined with our electronics and specific software ensure that manufactured chips are properly tested and validated without stress.
Product details Homepage Datasheet Product request
ZAO SHORT STROKE ACTUATOR
ZAO SHORT STROKE ACTUATOR
Precision actuator
ETEL S.A.
Precision actuators
ZAO SHORT STROKE ACTUATOR
ZAO is an actuator featuring a frictionless bearing arrangement and a light moving mass, ensuring very low and repeatable force application as well as low force overshoot at impact on a contact surface. Built to take full advantage of ETEL’s sensorless force control algorithm, ZAO allows simultaneously a very tight force control accuracy (0.2 N ±10%) and a very high dynamics capability (up to 20 g’s).

Main specifications :
- Total stroke: 27 mm
- Acceleration: 20 g
- Nominal force application: 0.2 to 2 N
- Force stability at force level 0.2N: ± 3 mN
- Typical move and force: 8.5 mm ± 0.3 mm & 0.2 N ± 0.04N in 60 ms

Ask for the corresponding Integration Manual for more information.
Product details Homepage Datasheet Product request
DYNX VERTICAL AXIS SOLUTION
DYNX VERTICAL AXIS SOLUTION
Linear axes
ETEL S.A.
Precision actuators
DYNX VERTICAL AXIS SOLUTION
The DynX ballscrew driven linear series is a high precision axis dedicated to vertical applications. It is available with different standard travels and is ideal for all applications where high reliability, high throughput, outstanding accuracy and easy integration are required.
These DynX axes can integrate tooling plates (standard or customized) and connecting elements (motor, encoder and optional hi-flex / long-life extension cables available in different standard lengths compatible with the various ETEL's controllers).

Characteristics
- 1 width: 155 mm
- Three standard travels up to 150 mm
- Ballscrew driven version
- Dual encoder feedback
- Counterbalanced linear motor version also available on request
- Easy-to-access interface
- Options available such as limit switches, brake and encapsulation.

Main specifications
- Bidirectional repeatability ±0.5 µm at ±3s
- Absolute positioning accuracy
- down to ±4 µm (w/o mapping)
- not to exceed ±2 µm (w/ mapping)
- Speed up to 0.3 m/s
- Acceleration up to 3 g (30 m/s2)
- Position stability ±40nm
Product details Homepage Datasheet Product request
TUCANA SHORT STROKE ACTUATOR
TUCANA SHORT STROKE ACTUATOR
Short stroke actuator
ETEL S.A.
Precision actuators
TUCANA SHORT STROKE ACTUATOR
This actuator, Tucana, can be used in any applications where force, throughput, long lifetime and reliability are required within a small form factor. It typically fits with the requirement of independent Z axis for testing handlers.

Main specifications
> Total stroke: 10.7 mm
> Peak force: 29 N
> Continuous force: 11.5 N
> Speed up to 1 m/s
> Acceleration up to 30 g

Ask for the corresponding Integration Manual for more information.
Product details Homepage Datasheet Product request