587,827 active members*
2,995 visitors online*
Register for free
Login Register
FANUC Forum
DIY CNC Router Table Machines > A Desktop CNC by David A - Page 7

Thread: A Desktop CNC by David A

Page 7 of 7 567
Results 121 to 135 of 135
  1. 06-04-2024, 06:45 PM #121
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Install the right one from the bottom, pushing it up against the foot blocks.

    Attachment 506268
    Reply With Quote Reply With Quote
  2. 06-04-2024, 06:46 PM #122
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Install the left one loosely, about 10" away.

    Click image for larger version.  Name: 008.jpg  Views: 0  Size: 338.4 KB  ID: 506270
    Reply With Quote Reply With Quote
  3. 06-05-2024, 03:25 PM #123
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    .

    The catch basin from the front.

    Click image for larger version.  Name: 009.jpg  Views: 0  Size: 273.7 KB  ID: 506310
    Reply With Quote Reply With Quote
  4. 06-05-2024, 03:49 PM #124
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    And the back.

    Click image for larger version.  Name: 010.jpg  Views: 0  Size: 242.9 KB  ID: 506316
    Attached Thumbnails Attached Thumbnails 010.jpg  
    Reply With Quote Reply With Quote
  5. 06-05-2024, 03:57 PM #125
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    The filter screen.

    Click image for larger version.  Name: 011.jpg  Views: 0  Size: 265.9 KB  ID: 506318

    - - - Updated - - -

    And the pump.

    Click image for larger version.  Name: 012.jpg  Views: 0  Size: 339.6 KB  ID: 506320
    Reply With Quote Reply With Quote
  6. 06-05-2024, 04:03 PM #126
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Adjust the left guard rail and slide the catch basin in.

    Click image for larger version.  Name: 013.jpg  Views: 0  Size: 396.4 KB  ID: 506322
    Reply With Quote Reply With Quote
  7. 06-05-2024, 04:06 PM #127
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Catch basin installed.

    Click image for larger version.  Name: 014.jpg  Views: 0  Size: 381.9 KB  ID: 506324
    Reply With Quote Reply With Quote
  8. 06-05-2024, 10:34 PM #128
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Leave some slack for the coolant return tube to pull out catch basin 5"-6" for cleaning.

    Attachment 506330

    Click image for larger version.  Name: 016.jpg  Views: 0  Size: 366.1 KB  ID: 506332
    Reply With Quote Reply With Quote
  9. Today, 04:07 AM #129
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    .


    The vacuum system.

    Remove the screws and plug on the left side.

    Attachment 506368
    Reply With Quote Reply With Quote
  10. Today, 04:09 AM #130
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    The manifold with a few standard plumbing items.

    Click image for larger version.  Name: 002.jpg  Views: 0  Size: 137.0 KB  ID: 506370

    - - - Updated - - -

    Coupler and nut installed.

    Click image for larger version.  Name: 003.jpg  Views: 0  Size: 322.8 KB  ID: 506372
    Reply With Quote Reply With Quote
  11. Today, 04:12 AM #131
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Standard elbow pushed into the coupler.

    Click image for larger version.  Name: 004.jpg  Views: 0  Size: 174.7 KB  ID: 506374

    - - - Updated - - -

    Gasket installed.

    Click image for larger version.  Name: 005.jpg  Views: 0  Size: 117.9 KB  ID: 506376
    Reply With Quote Reply With Quote
  12. Today, 04:16 AM #132
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Position the manifold assembly under the machine and tighten from above.

    Vacuum system installed.

    Click image for larger version.  Name: 006.jpg  Views: 0  Size: 434.8 KB  ID: 506378
    Reply With Quote Reply With Quote
  13. Today, 04:20 AM #133
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Grid with 216 suction points.

    Click image for larger version.  Name: 007.jpg  Views: 0  Size: 338.2 KB  ID: 506380
    Reply With Quote Reply With Quote
  14. Today, 04:21 AM #134
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Vacuum manifold from underneath.

    Click image for larger version.  Name: 008.jpg  Views: 0  Size: 359.8 KB  ID: 506382
    Reply With Quote Reply With Quote
  15. Today, 04:22 AM #135
    davida1234
    davida1234 is online now Registered
    Join Date
    Oct 2009
    Posts
    860

    Re: A Desktop CNC by David A

    Adjust elbow to fit your layout.

    Click image for larger version.  Name: 009.jpg  Views: 0  Size: 358.1 KB  ID: 506384
    Reply With Quote Reply With Quote
Page 7 of 7 567
« Previous Thread | Next Thread »

Similar Threads

  1. David A's Benchtop CNC Version 2
    By davida1234 in forum DIY CNC Router Table Machines
    Replies: 102
    Last Post: 09-09-2021, 02:08 PM
  2. Prolight-1000 Desktop CNC Mill and Prolight-3000 Desktop CNC Lathe
    By Seanster in forum For Sale Only
    Replies: 0
    Last Post: 06-06-2018, 01:50 PM
  3. KL-6090 Desktop Cnc Router desktop,(24 x 36 x 6 inch)
    By automationtechinc in forum For Sale Only
    Replies: 2
    Last Post: 09-18-2015, 09:05 PM
  4. KL-6090 Desktop Cnc Router desktop,(24 x 36 x 6 inch)
    By automationtechinc in forum News Announcements
    Replies: 0
    Last Post: 04-28-2015, 11:23 AM
  5. DIY David Steel CNC
    By Wineryrjd in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 03-28-2010, 01:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

IndustryArena Icon