587,997 active members*
1,965 visitors online*
Register for free
Login Register
FANUC Forum
Fanuc > Send and Receive file with Fanuc Series 18i-MB

Thread: Send and Receive file with Fanuc Series 18i-MB

Results 1 to 5 of 5
\r\n\r\n
\r\n
\r\n \r\n
\r\n \r\n
\r\n sumitsharma\r\n \r\n
\r\n sumitsharma is offline\r\n\r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
Join Date
Jan 2024
\r\n \r\n \r\n
Posts
4
\r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n\r\n
\r\n \r\n
\r\n \r\n

\r\n Send and Receive file with Fanuc Series 18i-MB\r\n

\r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n Hello, we have a client who transfers data from an old CNC with RS232 to a computer via a serial cable. They are asking us for a way to reach the CNC machine remotely from other computers. We have installed a MOXA NPort 5150 and configured it with the same serial settings as the CNC machine. I tried to open it with Windows Explorer using the IP address, but it shows nothing.
\r\n
\r\nHow can I transfer the data between a PC and CNC machine? Do I need to install any other tools to achieve this?\r\n
\r\n
\r\n\r\n \r\n\r\n\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n\r\n'; pd[2576214] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n 01-16-2024, 06:19 PM\r\n \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n machinehop5\r\n \r\n
    \r\n machinehop5 is offline\r\n\r\n \r\n \r\n Banned\r\n \r\n \r\n\r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2009
    \r\n \r\n \r\n
    Posts
    1573
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Send and Receive file with Fanuc Series 18i-MB\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n ...I think the RealCom Mode is what you need to use. Then, each PC install a RealCom Port with NPort Admin program IF, I remember correctly.
    \nhttps://www.moxa.com/en/products/ind...ries#resources
    \n
    \nDJ
    \n
    \nThere also I see a Firmware update 2022 V3.10\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    • \r\n'; pd[2576266] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n 01-17-2024, 08:34 AM\r\n \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n sumitsharma\r\n \r\n
    \r\n sumitsharma is offline\r\n\r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2024
    \r\n \r\n \r\n
    Posts
    4
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Send and Receive file with Fanuc Series 18i-MB\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Hi, thanks for the reply.
    \nI never worked with CNC machines.
    \nDo I also need any software to be able to read and write file from the CNC fanuc?
    \n
    \n- - - Updated - - -\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    • \r\n'; pd[2576332] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n 01-17-2024, 10:15 PM\r\n \r\n \r\n \r\n \r\n #4\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n zavateandu\r\n \r\n
    \r\n zavateandu is offline\r\n\r\n \r\n \r\n Registered\r\n \r\n \r\n\r\n \r\n \r\n \r\n
    \r\n Send a message via MSN to zavateandu Send a message via Yahoo to zavateandu \r\n
    \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Dec 2009
    \r\n \r\n \r\n
    Posts
    972
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Send and Receive file with Fanuc Series 18i-MB\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Use Program transfer tool from Fanuc for file transfer,is a drag and drop software ,it is cheap ,around 20 euro and is the easy and safe way to transfer files between CNC nad PC\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    • \r\n'; pd[2582809] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n 03-20-2024, 10:35 AM\r\n \r\n \r\n \r\n \r\n #5\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n JUANCARL\r\n \r\n
    \r\n JUANCARL is offline\r\n\r\n \r\n \r\n Member\r\n \r\n \r\n\r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    May 2016
    \r\n \r\n \r\n
    Posts
    26
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Re: Send and Receive file with Fanuc Series 18i-MB\r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n I’m using COMMUNICATION SOFTWARE FOR FANUC because it is more powerful and also because it can be used with serial communication RS232.
    \nIt is specially designed for FANUC CNC though it can be used also with other CNC.
    \nIt has several built-in help menus that show you how to use it with your CNC.
    \nYou can download it from “The SOFTPEDIA· web page.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    • \r\n'; // next/previous post info pn[2576206] = "2582809,2576214"; pn[0] = ",2576206"; pn[2576214] = "2576206,2576266"; pn[2576266] = "2576214,2576332"; pn[2576332] = "2576266,2582809"; pn[2582809] = "2576332,2576206"; // cached usernames pu[0] = guestphrase; pu[928376] = "sumitsharma"; pu[231843] = "machinehop5"; pu[250925] = "zavateandu"; pu[611070] = "JUANCARL"; // -->

    Threaded View

    1. 01-16-2024, 01:00 PM #1
      sumitsharma
      sumitsharma is offline
      Join Date
      Jan 2024
      Posts
      4

      Send and Receive file with Fanuc Series 18i-MB

      Hello, we have a client who transfers data from an old CNC with RS232 to a computer via a serial cable. They are asking us for a way to reach the CNC machine remotely from other computers. We have installed a MOXA NPort 5150 and configured it with the same serial settings as the CNC machine. I tried to open it with Windows Explorer using the IP address, but it shows nothing.

      How can I transfer the data between a PC and CNC machine? Do I need to install any other tools to achieve this?
      Reply With Quote Reply With Quote
    « Previous Thread | Next Thread »

    Similar Threads

    1. send and receive part programs from CNC –PC with FANUC CNC
      By JUANCARL in forum Fanuc
      Replies: 1
      Last Post: 03-25-2022, 03:52 PM
    2. Fanuc 11t RS232 send/receive
      By Motorsports-X in forum DNC Problems and Solutions
      Replies: 6
      Last Post: 03-25-2022, 02:27 PM
    3. File send/receive problems
      By danu37 in forum Milltronics
      Replies: 0
      Last Post: 07-09-2014, 07:48 PM
    4. Remote send/receive
      By 2hoop4inch in forum Haas Mills
      Replies: 10
      Last Post: 05-28-2009, 12:21 AM
    5. WIRELESS send & receive
      By SpeedMetal in forum Milltronics
      Replies: 1
      Last Post: 01-21-2008, 11:04 PM

    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Forum Rules

    IndustryArena Icon