Hi! does this also apply to LE430M? when booting up, holding MOD will enter boot mode for diagnosis? I am having similar problem, my backup floppy are corrupted, no matter what I do with ddrescue on...
Type: Posts; User: hi3cmz
Hi! does this also apply to LE430M? when booting up, holding MOD will enter boot mode for diagnosis? I am having similar problem, my backup floppy are corrupted, no matter what I do with ddrescue on...
Edit: The hdd is formated on FAT16, and the SYS partition is the master, then TNC/PLC was under a logical drive, I am not sure why is arranged in this way, it is by requirement of TNC426? so far the...
Good point!
I used clonezilla to backup the TNC/PLC/SYS partitions, the machine come with innodisk 4000 2GB PATA SSD 2.5 hdd as it suffered hdd failure few years ago, and the company that...
I am the second to want to know if the CF way works, as far as I know the 8GB CF are the closest today-available of storage medium that 430/426 used at the time that it comes to light, more than 20...
Hi! so what is best way to clone the LE430M HDD under linux? does clonezilla works? or other way around? thanks!
Hi, do you know what is the difference between MAHO 1600W and S? Also what was the most economical way to transport those older machine? I am thinking to dissemble it, but how far can a MAHO...
What I am planning is that the face facing end user, if my machine has no capability to make it right, then outsource to machine shop for it.. I am following your advice looking for nearby service...
Hi, thanks for replying. I need machine because I am planning to design product based on manufacturing capability, say mold be more or less complex, not affecting much for end product, but knowing...
Hi, first thank you for reading!
I am about to start to build a RF product of size of kids lunchbox, the case might be PET resin or AZ91d, either case, I need no more than 5k pieces in total. the...