Kinda sounds like the muffler has been removed from the valve on the drawbar assembly.
Type: Posts; User: slowlearner
Kinda sounds like the muffler has been removed from the valve on the drawbar assembly.
Jalessi,
Thank you for the link. I also found several other sources on Etsy .
I have found an individual on the Bay that sells artistic 3d files for machining.I seem to recall this person is or has been a member here and may have advertised on this site.
He has something I...
Where are you located? There maybe a member here that is near you that know of a mill nearby that isnt being advertised.
Welcome to the zone.
Dan,
Are you running a phase converter?
Both Mike and Brett are the go to guys here. They have helped me numerous times.
Do you have a computer hooked up to your vmc? If so unplug the rs232 cable and try it again.
I ran into this issue a couple months back.
Can you show us the model or a screenshot?
I agree with Mr. Shea. 3M makes some awesome urethane adhesives that I have used to join aluminum.
Have you tried to let it sit in this state for any extended period? I used to own an 850SX that had to sit for an hour before it would boot up when cold.
Interesting, whats the cost on this?
Have you tried having the castings annealed?
My dad was victim of Beryllium exposure resulting from casting injection molds and plunger tips during the 1960's. Yes it was the fumes from melting the alloy. If your employer is not requiring...
trelos,
Did the ground rod eliminate your problem permanently?
Havent had any issues since the previous noted day.Anybody ever have humidity issues with these machines?
Is your x axis motor direct drive or is it belt drive?
I've only had this mill for a couple weeks and want to thank those of you who did help me initially get it running.
This is a 1997 4020HT , Everything was fine last night when I shut it down.
This...
Give Mike Trunk a call at Fives Group. He is the 850 expert.
JB,
I may still have one for a Sabre 1000. I doubt it would be of any use to you though.
What version of MC are you using?
Sure looks like a Cincinnati.
Have you looked at the Gwizzard software? It is a speed and feedrate calculator. I seem to recall that Bob has some figures calculated for wood.
Think they offer a free demo as well.
Have a look at machinelink plus. It will run 5 machines at once. Pretty sure Predator has something similar.
I think the Lancer's are Cat50
I have a late 90's Arrow 1000 that was delivered over the weekend. I went to open the electrical cabinet this evening to start the wiring process.It seems the previous owner failed to send the key....
Your link doesnt work
Thanks, I will be following your lead.
Your vmc will have to be aligned every time it is powered up. Other than the alignment for the axis' and the tool changer are you having any other problems?
I have owned several of these vmc's over...
I used to frequent garage sales just to purchase older obsolete computers. Dos and Win95 386's were all I needed in the shop for file servers.
You would be surprised what you can buy for $5.00.