Ok... After system load (with pendant fail in Diagnostic) pendant show coords but does not respond.
https://www.cnczone.com/forums/attachment.php?attachmentid=461122&stc=1
Type: Posts; User: bdrotaru
Ok... After system load (with pendant fail in Diagnostic) pendant show coords but does not respond.
https://www.cnczone.com/forums/attachment.php?attachmentid=461122&stc=1
Hi.
Can anyone tell me if he encountered this error with Milacron mill pendant and how he solved the problem?
Thank you
https://www.cnczone.com/forums/attachment.php?attachmentid=461110&stc=1
...
repauli is right!
Andrew is a great guy and when i had issues with plasma config always helped me. email is worst option.
Hi Andre
It seems that you have a old version of mach3 plugin. Last time i used mach3 with this Neuron THC all Russian characters not existed anymore.
At this moment, AFAIK, development of plugin...
Hi. Thanks for reply. It is a Fanuc a20b-1000-0693 controller. And I get Alarm no 2....
I attached a video with this behavior. Any advice please?
https://youtu.be/2maS3xcPl6I
Are there any brake resistors in this machine? Maybe are burned or disconnected. I don't know where to look.
Thanks
Hi
I have a 1986 QT20N with Mazatrol T2 got from a auction with a spindle problem.
On gear 1 machine get to 900 rpm but brake to 0 rpm is taking over 6 seconds. Acceleration to rpm's is ok.
On...
Hi. I have a Milacron Sabre 750 with Acramatic 2100.
Machine doesn't have a probe so i have to use a Haimer 3D Taster.
Is there any way to rotate work offset with G68 using 3D Taster for finding...
Hi!
1. If ohmic sensor sense dross it will rise (or stop cutting - you have that option too) to avoid collision.
2. On small circles is recommended to be cut with 60% to 100% of cutting speed...
Modify the second sleep value from every cycle from 500 to 5000. Drives need to be shut down for error led to be off
Hi. I work on a MAXPRO200 cnc plasma machine with a high end THC and for about a month i notice that there is a difference of about 15 volts between what i cut before and what i cut now for same cut...
Dear Torchead
I contacted you 3-4 years ago before purchasing any other THC. But you treated me like i wanted to steal from you not to buy. I'm sorry that i didn't keep the message received from...
Hi Formaz
To answer your questions i will share with you from my experience because i built couple machineses and i learn couple things from people who share informations and of course, mistakes....
Interesting choice. But what you will do when plasma interferences will kill your LCD screen??? You will buy another THC from same seller or you will ask a "techie guy" to do some service?
I'm using Neuron THC Controller.
I've tried lots of THC controlers. Both capacitive and voltage. This one seems to be realy featured. For about 800$ you will get a proffesional THC controller,...
I've built couple tables and i used couple THC sensor so i will try to answer your questions.
1. Worst thing happened - Torch Break. With Agelkom. Cutting on the edge of plate with capacitive THC is...
I'm using Neuron THC at my plasma table. I've tryied before Proma, Agelkom Capacitive and RazorTHC. But it seems that i will stop to Neuron.
Proma - Very accesible and easy to install,
Razor THC...
did you finshed this screen?
You are right! But even with floating Z torch is touching metal sheet. Is not this a problem? Shiny metal (wich i belive is shield) is not deformig due the multiple touches? When you cut very thin...
I forgot to mention. I just purchased Voltage THC and i intend to replace capacitiv THC.
That's why i'm interested in ohmic sensing
I have Diy plasma table with capacitive sensor. Main problem is when machine is cutting on sensor ring is sticking dross, so i have to stop the cutting process and clean sensor ring just because...
Hi.
Regarding ohmic sensing....
How can you use ohmic sensin on dyi machine?
Can ohmic sensing be used on input port in mach3? (ground on Breakout Board and plasma Clamp when are in contact to...
you can watch on ebay. there are a few good plans to buy from there. In my opinion you will realise that is much much cheaper to build.
Depending on machine size you can build your machine with...
I brought some plans from ebay a while ago and i built my table. But this is another project.
This looks ok. I see it's contain solidworks files :cool:
I don't know what to say....
Send link please
Problem solved.
If admin think this post must stay it's ok. If not please delete.
Anyway.....
After i read the error message i realize that is something wrong with servo motor on y axis (carriage...
I just purchased Plasmacam from a company. The table was used for demonstration on expo's and really cut just one time. I think an unexperienced user assembled table wrong and something bad happen....
How do I connect relay from mach3 system to cnc interface???
I would like if somebody would design usb controller with four axis tb6560 on the same pcb