Search:

Hello,
I was wondering if the THC controller hooks into the manual input port on the breakout board board? I was told they work with most controllers but I'm not exactly sure where it would...

1 piece at a time.

All,
I was hoping someone could give me a starting point on what size punch press to get. We will be stamping out 1/8" knife blanks that are 1.5" x 9". I see punch presses all over the place...

I've heard completely different about peristaltic pumps. I've spoken to a bunch of tech support guys from pump manufacturers and there are a lot of companies using them for honey. They even use...

zing!

Its funny that you mention the piston ram setup. We just finished the prototype piston filler pump that we've been working on for the past 6 months. This machine is factory quality all stainless...

I think its more trouble than good. I think I've decided to forgo the timer and use a latch switch via/remote cord that the operator can control and then offer an option food petal switch

I was thinking that but we have a dryer/filter on the compressor. I can't see it being any different then using co2 on soda or beer.

I was thinking this would be somewhat low PSI, just enough to keep a pushing force above the honey. Just not sure what PSI will be effective yet safe to keep from a honey filled room. I'm going to...

found that the feature needed is called check weighing. I'm still interested in determining if the pressurizing of the tank will help make it more consistent.

Know of any?

Hello,
We're putting together a hobbyist bottling system that will bottle honey. Currently you have to manually hold open a valve until the jar is full and close the valve. The valve is on the...

Looking for a quote from someone who can vacuum form. Just need a ball park price.

1/4" thick HDPE. It will need to get formed over a .75" height round dome, with a 1" flange edge. The diameter...

Looking for a shop within 2 hours of the DC / Baltimore Area that has a seam welder. Making stainless steel tanks and need the seams welded by a seam welder. Need a minimum of 12.5" throat, prefer...

Looking for a brass branding iron to be made. I will tap the handle, I just need the head made. The final iron should be about 1" x 4" and made from 1/2 " brass. I've attached a picture of what...

Anyone know what is the ideal spacing between the airholes on a vacuum table? I'm going to be forming molds for concrete veneer and pavers. I'm not sure how far the holes would need to be from the...

All,
I see vacuum forming machines and they have air tanks attatched to the vacuum pump. Why are they used? what do they do?

Hello, I'm hoping someone can tell me how a certain type of mold is made. These molds are becoming more common and are starting to show up more for concrete casting. Id like for someone tell me...

Ahh gearing down the motors. That always confused me because I could never find a correct answer on how to calculate the ratios based on the pulley sizes.

I'm going to put together a CNC plasma soon using 80/20 parts and I was wondering if anyone has used a spur gear/rack setup to create movment? If so is the accuracy anywhere close to the accuracy of...

I was going to use the pipe instead of DOM for small furniture projects.. But I think I will stay away from the galvanized pipe, its just not worth even trying to wire wheel the zinc off. Thank you...

The galvenized part is the coating that is sprayed over the material correct? If this coating is wire wheeled off is it okay to weld on?

Are there any strength difference between the galvanized pipe I can get from the hardware store compaired to DOM steel tubing? I'm not sure if I could use the pipe in place of DOM and still retain...

Anyone else able to produce these using a waterjet or plasma?

You can go ahead and quote me for a waterjet if you'd like. If its cost effective I wouldn't mind the better quality.

Need 30 brackets plasma cut, I've made a basic DFX of the part and attatched it. These will be .250" thick 1018 cold roll. I haven't made the final .DFX of the part but this is basically it. I will...

This computer is a dos system. the machine is about 5 or so years old.. its a celeron 333.. do you think the computer can't handle this?

Ground my computer? I've never heard of that before.....

Hello,

I need help with my steppers.. I'm not sure what the problem is. I have 2 automation direct steppers 260oz, being run by a xylotx board, powered by a 24v 6amp Power supply. I have...

It actually happens both when its idle and when they are running.

I found the settings and changed them as needed. Thank you!