thanks for your reply
we never touch the ladder files
the machine lost parameters due to lack of battery and got them back to machine
every thing is working fine but the operator tried to get...
Type: Posts; User: nabil_elbadri
thanks for your reply
we never touch the ladder files
the machine lost parameters due to lack of battery and got them back to machine
every thing is working fine but the operator tried to get...
Hello Gents
could some one help me to solve this problem please
when press auto button on screen it give (RMT) instead of (MEM)
and the led on the button flashing
controller is 21i milling...
of course I override the safety interlock its OCTG lathe :)
any way i will try with the door after tomorrow and will tell you the result guys
thanx for your reply Dale123
454490
thank you for your reply dhardt:
machine serial number is P35L3149
i find this attached drawing in the electrical Circuit Diagram
i need to know what this key does in operation for...
Hi all
can any one tell me the function of the button with key selector in the picture please?
machine is doosan puma lathe with fanuc 21i TB
dear sir
thank you very much for your reply
please advice for how to get these missing option data, if you have at least similar machine , i contacted the machine builder in Taiwan they reply me...
Hi Gents
I have cnc milling with meldas 64m control,with out APC coder, last week i was working on battery replacement and parameter back up (it was long sad story)
i didit manually, any way...
try (G04F1)
F1 for 1 sec
hi gents
I need manual guide i book in pdf format ,pls
so if any one knows a link or has it I will appreciate any help
the s/n for the book is B-63874EN/03
thnx in advance for any help
hi gents
i have problem with cnc lathe controller fanuc 18i-tb
when i start the machine i have a wrning message when loading data it says (system software and defining file version are mismatched)...
ur mistake is that u switch on the machine while holding delete key .
i have the manual and i review the alarm number 911 and alarm number 101
as per the manual it says for the alarm number 101 to...
hi guys
thnx for ur reply
the situation is when ever i switch on the machine and zero return the A axis, i get 10 degrees different comparing with the marker on the scale and even if i rotate the...
i agree with alexfanuc
it happened to me 3 years ago the machine is fanuc O-M vmc i lost all the parameters and have to insert them to the machine manually in mdi mood
and some of the parameters...
hi guys
thnx for ur reply
it's a dividing head with small chuck diameter about 200 mm capacity,can be fixed on the table in horizontal or vertical positions only
the manufacturer is LCM the...
when u switch on the machine and select MDI mood and have the emergency button pressed ,do u see any thing on the screen??
hello
i have a problem with dividing head (A AXIS) machine is vmc FANUC 18M
when i switch on the machine all axis goes fine to home position XYZ&A
No (APC) provided with the machine. the problem...
thnx for ur reply angelW last step i didn't do it exec
so i will try it as soon as i got to the workshop
thnx again for ur help guys
thnx for ur reply fordav 11 , actually that's my problem , i need to set zero in relative page, when i work with handle and touch the tool tip at the face of work piece and select relative page to...
HI All
i have a problem with set zero in relative screen (lathe machine)
when i want to set the tool in X or Z to zero in relative the value dosen't change to zero (only in relative coordinates)...
hi all
i have an alarm no 1038 (head stock lubrication loss)
the machine is
ALPHA 1400 XS 600 Group
The controller: COLCHESTER –HARRISON GE Fanuc ALPHA X Series
i checked the oil level in...
hi all
i have an alarm when i switch on the machine says (encoders battery flat)
the machine is 3 axis milling FANUC Oi-MC
do i need to change the battery for the APC ???
because the machine is...
:confused:
hi all
i have catia 5, part file(solid), and i try to open it in mc9.1 as follows:
file/converters/next /next/catiav5/read/ after i click read i get command bar in mc's interface asks...
thank u for ur reply i did it and it works very nice
thnx again
hi gents
i need to record a video for machining in simulation for milling with mcx3,
r there any tool bar or command in mc x3 to do this recording ???
if not, how can i do it in any other way?
i...
now i understand it very good
thank u very much sinha and thanks for all ppl who replied to me.
lets have some:cheers:
thank u for ur reply chucker, the file u sent me explained the same way as the manual that i have, i didn't understand the part of explanation
(- second 2 digits is % of the lead or pullout exiting...
hi gents
i need to understand very good the value P for G76 in the first line, as you know P letter contains 6 digits each 2 digits represent function, i need to understand the second digits which...
thank u very much
please do ur best to send me all necessary parameters
i am waiting to ur reply
thnx for ur reply
but i don't have photos,sorry
about the product name i didn't understand what u mean by product name,
if u mean the machine builder it's EMCO VMC
hope this helps
thnx
hi gents
i have two cnc sinumerik 810M& 810T didn't work about 3 years so the battery lost and expired, now I need to replace the batteries but as u know all the parameters has been lost,when i...