Nothing wrong with learning at home. I was not trying to imply that. I also learned Software development and been doing it for a long time. But guess what, buying a CNC Mill will never make you a...
Type: Posts; User: Rally
Nothing wrong with learning at home. I was not trying to imply that. I also learned Software development and been doing it for a long time. But guess what, buying a CNC Mill will never make you a...
While the MANUAL option does indeed help a quick post here would be better.
If you don't want to do that, that obviously is fine as well. But why waste bandwidth by posting "MANUAL" If I wanted to...
Hi all,
Would one of you G-Code Guys please be so kind and Post a Code Sample for for a deep hole and a chip break drill cycle.
Thanks
Personally I do not see how buying a machine tool will teach much of anything.
Tinkering at home will never be the same as attending some type of school or simply doing a apprenticeship in an actual...
Maybe you will have to ask them what size there panels are LOL
But to be honest it blows my mind to hear that. Most everything in my area is 480.
First time I ever heard of transforming UP!
I would be glad to look at what you have you can contact me [email protected]
Your post seems just as vague as the listings you refer to!
What is it that you are trying to do? If it is a Machine-shop that you are seeking I would almost bet that any large size building would...
I am rolling now! Thank you that made my day.
Could be a number of different things but the board under the screens could be the culprit. That happened to our BMC20 once if I recall we did not replace nothing but there was something loose
I do not know where you get your information but you would be well advised to listen what Geof has to say!
PS: A good CL (Chicago Latrobe) Drill will hit size better then 0.005 The Mean Value for a...
It seem obvious that you are a Machinist and it somehow seems that you are trying to teach a cow to dive. He is not going to take your word or explanation for that matter so why try?
Impossible to answer that question without knowing what it is you are trying to do.
Maybe Trade school would be a better investment. You should be able to take single classes to suite your interests.
Put the Spindle Nose on a board on the Table that would be good enough
This is a new VM30 and the Delay when it raises the Head and does a position move is killing me. It seems that the machine is waiting for something.
it sits there for 3-4 seconds before it does the...
Get a cheap HD(Heavy Duty) Drill press all of them will work just fine. I have 2 of them in my fab shop I had them for over 10 years.
What was the Mastercam originaly purchased for? Did you not get that information before purchase?
Not trying to be an a** but if you are using a pirate copy you will not be able to get much help...
Hi guys!
Was wondering if I could get a little help booting up my 91 BMC-20 it is an Ultimax 3. Shut it down over the weekend and now it will not boot back up. We lost our config. The Battery has...
The Machine that I use for Mastercam also has a new version of Excel installed.
Mastercam X5 locked up when I tried to pick from the quick drill Tables.
My fix to the problem was as follows....
AutoCAD? That is high end CAD compared to some of the more reasonable CAD's out there.
Besides, to start out why not stick with CAM? It will do just fine for basic drawing. I prefer VisualMill...
Are you thinking that Mastercam is a low end Software??? Get real.
As for the transition, I would say moderate If you know anything about CAD/CAM
Found the answer to my question! I figured I'll go ahead and and post this just in case someone else needs this.
Here is the Stucture for Standard!...
Do you have the training manual? If not I may be able to come up with a copy.
Cabinet temp high or sensor dirty is what I would check, this was a problem we had not to long ago. Once there was a problem with the sensors but in the summer time we had a problem where heat...
HA HA just kidding that info helped me as well
Thanks
I have set up a post for a Hurco and need help with the stucture of the Drill can cycles. If anyone coujd help that would be great. VM5 by the way!
The format I have now (Standard Drill) is as...
You are wrong
Great Info!! Thanks for that Video.
I think we are likely not talking about the same thing. Making the actual Part is not the problem here. It’s also not a problem to get the correct size shape.
I do understand that the shape (do to...
So basically what you are saying is that it is not possible?
That being said, I will not get a true representation of what I'm trying to cut ?
So what I'm saying is that if I extrude the shape as...