Moving to a smaller flat so selling my home built laser cutter/engraver. London pick up only due to the size.
Large Format 6W Laser Engraver/Cutter - 930mm x 850mm | eBay
Any questions please...
Type: Posts; User: neurofen
Moving to a smaller flat so selling my home built laser cutter/engraver. London pick up only due to the size.
Large Format 6W Laser Engraver/Cutter - 930mm x 850mm | eBay
Any questions please...
Could be any one of a number of reasons.
Basic things to check first would be :
Are the mirrors aligned properly.
Is the laser mounted at a perfect 90 degrees to the bed.
Is the laser...
You cold buy yourself a ready made 40w co2 laser cutting machine from ebay which are only about £300. Strip the mirrors, co2 tube and psu to install on your cnc.
Otherwise a 6-10w laser diode...
Sounds like it could be outputting code that uses G1 commands (maybe also G2, G3 etc) for all moves instead of inserting G0 rapid moves in between the cuts.
Hi, I looked into this recently but due to the price of buying a proper filtration system ( i saw a few starting at around £700) ended up buying a couple of dual filter face masks which work really...
hi, what kind of power laser do you need on this? I have a machine that is for sale cutting area of 1000mm x1000mm but it currently only has a 6w laser attached. A c02 tube and mirrors could be...
HI,
I have just finished building a largish 1000m x 1000mm laser engraver but am finding it difficult to source a protective screen at this size that doesn't cost an absolute fortune. Does anyone...
1.5KW spindle and mount + Moeller inverter + filter + collets
1 x Moeller DV51-322-1K5 inverter: 1.5KW, 8AMP.
1 x DEX-KEY-61.
1x DE51-LZ1-024-V2 Filter.
1 x 1.5KW air cooled motor spindle with...
it's great isn't it. Enjoy your new tool :) in silence
thanks rolf for th einfo. I think i'd have to agree with you there though cinematic, after a bit more research I've just noticed how cheap the 40w ebay chinese 200x300 all in one units are. £350...
i think i'll eventually get a co2 tube, but in the mean time saw a 2watt 808nm diode based box on ebay:
Industrial 808nm 2000mw Infrared Focusable Laser Diode Module Cutter w/TTL | eBay
has...
thanks for that
ok, I've got a really low powered 350mw laser. A quick question on cutting through stuff (very thin materials), the theory is probably the same for high powered lasers. Should I focus the laser...
Thought I'd share this link since it was an interesting read. Some dude's chinese laser machine mod.
My cheap Chinese laser experience
hi, I had a job, part of which involved cutting dozens of coloured filters into circles, had a small amount for expenses and always wanted to get into laser cutting so thought i would start with a...
I've seen a few 3d printed kits and there are some open source projects, dunno if you've seen them, if not worth a look
This one is smaller than 4' x 4' but should easily be scaled .
...
Does anyone know of a UK supplier of drag chain. Ideally looking for cheap 15mmx30mm(or there abouts) for about £15 a meter with a next day delivery option.
I was going to use Zapp automation but...
thanks tahustvedt, I was hoping that was the case.
ta, as a temporary measure I managed to hook it up with a fused 13amp plug and some 20amp cable which seems to have done the trick.
The round 1.5KW aircooled spindles are deadly quiet. I just ditched a 1050w router for a chinese made spindle from ebay and couldnt believe the difference.
I've just wired up my spindle and VFD. All seems well but the spindle current readout on the vfd seems way off for the spindle rating.
I'm going to speak to the techs monday on the phone but in...
aye, i was going to set the minimum freq to approx. 133Hz, which equates to about 8000rpm. Maybe experiment and drop it to about 100Hz. The chinese spisnlde thread here was good also, but i have to...
hey al, it's a Chinese spindle so specs are a bit thin on the ground, but it's the 1.5kw version. 8amp it says, not sure if that's at full load. To be honest i'm a bit bewildered by all the...
Finding specs on these spindles is proving abit troublesome. To play it safe you could always code a wait or 2 into the program, allowing the spindle to retract, powerdown and cool off a bit before...
thanks john. I take it i'd replace the wall socket with this panel socket? Do you know of any plug and play systems. I'm trying to get away without taking the plug sockets off the wall.
picture attached...
Ok, so in a frenzy I bought an inverter for my spindle thinking that i'd stick a plug on it:). Failing to take into account all sorts of things that i should have done. :/
...
Just got a cheapo 1.5kw spindle in the post, been hunting around to get a full spec on the unit but drawing a blank.
I've go the obvious details ie. its made in china, is a 3 phase air cooled...
Thanks for that, i took a look and they seem to be pretty reasonable but i think after international shipping and import taxes etc it could work out a bit more expensive. I found these guys in the...
I'll be using the front of the inverter to start with, no automation. After wiring the inverter to the spindle i'd like to be able to turn it on, set the frequency and let it run. Eventually i'l work...
There's a lot to look up, i think many of the features i wont be messing with to start with, as long as it powers up the spindle and lets me control it reliably. A lot of the inverters in the uk are...