I no longer get any responses from them. I agree when Tyler was there he was always very helpful. Sounds like they gave up on certain products or are struggling as a company. Not sure which.
Dan
Type: Posts; User: dfurlano
I no longer get any responses from them. I agree when Tyler was there he was always very helpful. Sounds like they gave up on certain products or are struggling as a company. Not sure which.
Dan
I'm am now wondering if there is a way to use Mach4 as the software for the Flashcut controller. To me it sounds like the big issue would be identifying the pin outs and sync the signal.
Using...
Can appreciate you may not be having issues but if you talk them again can you ask them to fix the a axis display? I have been asking since I bought the system several years ago.
This is what it...
I would really like a dial and not a keypad. I got the shuttle to work but lost the configuration due to a computer change... it worked ok. Someday I may go back it and re-program it.
If they would release the SDK at least there would be a possibility to make improvements...
I asked a while ago and they said maybe in a year or so. I thought the did give out the remote.dll...
...
You don't want to use Flashcut. There isn't much of an active user base and support is nonexistent. I regretted it.
Looks very cool.
On another note seems that Flashcut has decided to no longer respond to support questions. I was wondering if you know how to increase the resolution of the tool path display? I...
Cool beans.
Just a note. I could not get the jog distance to work using the down arrow. You need to have checked the "Keyboard Jog Requires Control Key" under the Jogging Settings menu.
• 0.1 = O ~ Down Arrow
• 0.01 = O ~ Down Arrow ~ Down Arrow
• 0.001 = O ~ Down Arrow ~ Down Arrow ~ Down Arrow
I can't get these keys to work, the only thing that happens is the Y axis moves. I...
Where is the shuttle pro plug in located? Are you talking about the Mach3 plugin if so how do you install it in Flashcut?
First test cuts. This is a 1/32 ball nose cutting wax.
235218
I upgraded my system from Mach to Flashcut. I had a lot of extras that I needed to get connected. On the left of the Flashcut box I have a NSK spindle controller. Also I have two 12VCD solenoids,...
Anyone use a different pendent then the one sold by Flashcut? I would like a pendent with a dial and keys.
This is a text messaging that works with Verizon (vtext). I would assume you can play with it to get it to work via email. Where is says [email protected] put in your email. Where it says xxxxxxxxxx...
In the windows device manager can't you just change the com port number to com1?
This is the homing switch I am using.
http://reprap.org/wiki/OptoEndstop_2_1
this is what I ended up with.
http://www.dfurlano.com/wiring.jpg
It was my fault. I added some water to the bowl and once you turn the air on blew out the water and shut off. When it was dry it just was blowing air and did not shut off.
I had Jun Air filters...
Mike,
I am using ARO 1500 filters (pre and coalescing) and I just bought the automatic drain but the strange thing I am not sure how they work. I assumed the automatic drain needed a value to...
Specifically what relay are you suggesting? Although I am getting a board that will eliminate the 540 someone else may have the same issue.
I need something packaged because I am really afraid I will fry my PC. With an optoisolated board I feel safer. Electronics and me just don't mix some days.
BTW here is the solenoids I am using....
I am sure you are correct about the overloading. I think this is the third time this has happened. I have to keep a spare G540 because it always happens when I don't have time to send it back for...
Looking for a suggestion. I use a G540 and output 6 is a constant problem.
Works for about a year then it has to go back for repairs.
I would like to find a different way to control my...
Thanks.
Thanks for the input. It is an air compressor with npt threads a two stage filter (pre and coalescing) and an automatic drain. So pneumatic running at 120 psi. Not real sure what you mean by non...
This is a question about pneumatic connections.
I have read to use:
545
5452
275
271
Any comments or suggestions? I am putting together my compressor with a new filter and automatic...
My guess is the gibbs are too tight. Make the loose and try it again.
Thanks for the suggestion. The problem is that after a tool change I have a macro that homes the machine and the probe is used to set the tool offset.
This question stemmed from a problem I had...
Biggest issue I have found is there are not enough inputs into the 540. Having 4 is very limiting.
Is it possible to hook up 4 homing switches to this configuration. Currently I use port #1 on the G540 as a probe input and a second parallel port for the switches. But the second port is not very...