Search:

Hello Brandon, it is my pleasure to help you. Don't worry and take it easy, if you make some progress in servo system, you will find it is wonderful for a CNC machine.

As I said serval days ago,...

Hi Brandon. Thank you for your feedback.
I need to emphasize one thing before we go: The original servo parameters are critical important. You must backup all of them prior to change any items.
...

You are welcome Brandon. How are things going? What is the result of pushing and pulling the working table when servo-on?

Hi Brandon, I saw you pictures. They both are spindles'. Well, It doesn't matter. I bet your servo drive is SGD7S-7R6A00A.

I just need some pictures of your abnormal cutting work pieces. According...

Hi Brandon, maybe I can help you. FOR FREE.
I need to know some information.
What are your spindle and VFD specifications?
What are the models of your servo motors? X axis and Y axis.
Could you...

Don' worry. The temperature of stepper motor surface up to 70 ~ 80 celsius degree is very common.

Have a try to set PD002=0, which means the operation frequency is set by the keypad.
Then tune up the frequency by pressing the up arrow key. See if the freq. could be 400Hz or not.

No doubt about that servo motor is your only option since you want to build a high quality 5-axis mill.
And the mechnical desgin is a key point.Whether you should or should not use planetary...

Hi Steve, what is the model of VFD? Or, could you post the picture of VFD's nameplate?

For the CNC machines, crash is inevitable. I suppose that 0.25mm or 0.36mm apart is not a big deal. The mechanical structure should not have been damaged. Please check your manual, there must be a...

Hi Dave, did you solve your problem?425967425969

Which brand or model do you want?

I guess the motion control card's drivers are not installed properly.

Hi jack,
I suggest you equip a 110VAC to 220VAC transformer. Because most of the spindles are 220VAC or 380VAC types when their power are over 1KW.

Which size do you want?

I don't think replacing the bearings is a better choice than motor.

Hi, Les, click "Go Advanced" ,and then click "Attachment" , attach a jpg File

Awful,size limited.
Do you need the wiring diagrams? Maybe later.

Do you need to controll the VFD dynamically？Then you need a controller which has analog input and output module. Such as PLC.
The potentiometer and pressure sensor connect to the controller's input...

Hi, I have one, how to send it to you?

Hi Tim , I didn't see the zip file you attached. Where should I find it?
East

Could you show me your motor's brand and its model?

Where did you get this machine? Is it from China? I find Little information about NRG330. It seems that there is a Chinese vendor who sells glass processing center. What kind of password does it...