504,518 active members
4,225 visitors online
Register for free
Login
Results 1 to 11 of 11
  1. #1

    Join Date
    Aug 2019
    Posts
    19

    laser engraving problems

    Can anyone email me the parameters to the china laser engraving machine roudia

    thanks

  2. #2
    Member
    Join Date
    Aug 2019
    Posts
    31
    Which brand or model do you want?

  3. #3
    Registered
    Join Date
    Jan 2008
    Posts
    877

    Re: laser engraving problems

    try this one

  4. #4

    Join Date
    Aug 2019
    Posts
    19

    Re: laser engraving problems

    Thanks, I will try that tonight

  5. #5

    Join Date
    Aug 2019
    Posts
    19

    Re: laser engraving problems

    I tried to download it to my computer, but I don't know what program to save it as. It is trying to save as a rdworks file? instead of just unzipping onto a saved file?

  6. #6

    Join Date
    Aug 2019
    Posts
    19

    Re: laser engraving problems

    I did figure how to get the para onto the laser, but now when I print, It wants to print huge, no matter how small I make the it..Could you help me on that,,,you have helped so much, thank you.... I still can't get the laser to go to home base, but at least it is moving up and down smoothly..thanks

  7. #7
    Registered
    Join Date
    Jan 2008
    Posts
    877

    Re: laser engraving problems

    First off cut a square that is say 100mm X100mm that you can measure. Then go into your vendor settings and read the file then save it so you can always go back to it. Change the step length for each axis by one half now if you are using my parm it will be .3500 so change it to .1750 and then write that to your controller then cut the same square. measure it and see what the difference is you can the adjust from there either up or down. Hope this helps

  8. #8

    Join Date
    Aug 2019
    Posts
    19

    Re: laser engraving problems

    Thanks so much, I am going to try it as soon as I get off work, thanks for all your help

  9. #9

    Join Date
    Aug 2019
    Posts
    19

    Re: laser engraving problems

    I did it and not It prints huge, I am going to download some pics..thanks

  10. #10
    Registered
    Join Date
    Jan 2008
    Posts
    877

    Re: laser engraving problems

    My best advise is to see if your vendor will send you the file for your laser. If that doesn't work Still try cutting a 100 x 100 mm square and see how close it is. If it is still to big divide your step number in half and cut again you should get pretty close then just keep adjusting until you get the square to cut 100 x 100 I will have to see if my old laser has the file you need.

  11. #11

    Join Date
    Aug 2019
    Posts
    19

    Re: laser engraving problems

    When I change my x axis any where close to .3500 the axis barely moves, I always have to change it to at lease 10.0000, do you know why is that

Similar Threads

  1. RE: Laser engraving problems
    By ninainwa in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 2
    Last Post: 08-22-2019, 04:49 PM
  2. laser engraving problems
    By ninainwa in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 10
    Last Post: 08-21-2019, 10:48 PM
  3. Having problems with engraving - May need a new laser
    By sports310 in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 3
    Last Post: 12-29-2016, 03:48 AM
  4. laser engraving problems shenhui 350
    By laserdesignlady in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 6
    Last Post: 10-22-2015, 11:29 AM
  5. engraving / laser machine problems
    By noeleen in forum Community Club House
    Replies: 0
    Last Post: 05-25-2013, 08:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •