Not sure if this is the right place to post this but here it is. I have some metal working equipment in my garage and do some playing around as a hobbie. My question is: Is it worth starting a small...
Type: Posts; User: bcnc
Not sure if this is the right place to post this but here it is. I have some metal working equipment in my garage and do some playing around as a hobbie. My question is: Is it worth starting a small...
How do I do raised letter milling(programming). Any wizards for doing this? I could draw my toolpath lines in a-cad but would take forever to do. Thanks Brian
I'm using a 850mhz laptop now. Theres been times when I am running a program and I will lose 0 location because my machine don't move but my readout will and it changes my 0 location. Then my machine...
Hello, Does anyone know if there is a minimum requirement for mach 3 to run correctly? Not sure if the problem is my computer or program, has a glitch sometimes. Thinking of getting new faster...
I am shopping for a new laptop to run my SX3. Can't seem to find one that has the parallel port, does anyone know if the USB to parallel adapter works on the SX3? If so, how would you assign pins?...
Hello, I need price on 1 of these knife handles out of a foam material that can be used for casting. I will have them casted out of Alum. I will machine hole in the piece after it is casted so no...
That squirrel will work myx, thank you
Hello guys, I need a dxf of a squirrel. It can just be a basic squirrel (not alot of detail). Thank you
when i import dxf file there are chain lines going everywhere. they jump back and forth instead of doing one object at a time. can i fix this problem? thanks
For some reason I cant use my keypad arrows to move my machine. I could before I reinstalled mach 3. Any ideas http://www.cnczone.com/forums/images/icons/icon3.gif what could be wrong?
thanks Brian
I think I got it ! Thanks Brian
I give up Cant figure out why my part is displayed upside down on the tool display screen. When I try to adjust it something else changes,like in the homing/limits screen. Ill try to give link to a...
Has anyone ever used double stick tape to hold a thin piece(.035) of sheet metal to a thicker piece(1/4") so it could be machined? Will it work?
Thanks Brian
here are the first couple of lines, the problem occurs when cutter is returning to X0 it gets about 3 inches away and starts to go down instead of staying at the Z0.1 position.
G0 G49 G40 G17 G80...
The Man, Can I send you my code and you can see if theres a problem with it?
Thanks Brian
as machine runs through program,and before it gets done traveling it moves to next line on gcode. goes down before getting to hole location, hope you understand what i am saying? thanks brian
If it helps Im using mach 3 controller. Ray, i think what you showed will work, will take some work though. Im not too good at programming yet. Thanks Brian
I really only need the contoured part, the rest I can do. Thanks Brian
Dont know if this worked but here is the file. http://www.freefileupload.net/file.php?file=files/260607/1182815114/AD-00113-026-A.pdf
Can Someone Convert A Pdf File To Gcode For Me Or Point Me In The Direction For A Program That Can? The File Is Pdf It Is A Solid Part .thanks Brian
Long story short, Spindle wouldnt work called Syil sent me new boards except one in the back cover and new spindle motor. Installed everything still does not work? :withstupi WTF! Anyone experience...
I am still working out the bugs on my x3, now I have a problem I didnt have before? I cant control the spindle from my laptop (mach3) I can hear a relay or something clicking in the machine but...
The table layout screen in the upper right corner of mach3 screen, everything is reversed. If my part I want to cut is in the upper left of the table layout,it will actually cut the part in lower...
I recently had the same problem with finding wires that have come unattached. I think this is the reason the Y ball screw came of the bearing and the balls fell out.Where was QC the day my machine...
Think I got bearing straightened out. Think I found the reason that happened, the Y motor spases out when I try to run it, like it don't know which way it wants to go? And its louder than the X...
super X3
did nt know it happened till started to investigate why the Y axis was sounding like it was binding. Sounded like there was a load on the Y axis.
:bs: :bs: Well think I found the problem, the Y axis ball screw is screwed. Ran the table out and there are ball bearings all over the place, looks like the snap ring came off the end of the shaft....
When I toggle y axis it changes direction when I let of button and push it again. It is very noisy ? Any help ? It wasworking ok. Thanks Brian
Can't seem to get my drawing/toolpath within my machines travel parameters? I watched the tutorials does'say what to do? On the diplay screen it shows my part that I want to cut outside my machines...