We have an Ajax 260 premire lathe with a burnt out X axis servo motor.
The label has worn off so we cannot identify the servo apart from MAE is the manufacturer.
Can you advise the model number of...
Type: Posts; User: Mike Conboy
We have an Ajax 260 premire lathe with a burnt out X axis servo motor.
The label has worn off so we cannot identify the servo apart from MAE is the manufacturer.
Can you advise the model number of...
Many thanks for the program list but it does not seem to be for a Heidenhain 151B controller. It has parameter numbers which do not exist on the 151B.
I have the manual from the Heidenhain web...
Does anyone have a parameter listing for a Bridgeport Interact Series I - MK2 with a 151B Heidenhain controller. We have a listing for a 151A controller but the 151B has a whole bunch of additional...
We have a Bridgeport series 1 Interact machine fitted with TNC145 controller.
On rapid Z traverse away from work (never towards work) it gives a "Gross Position Error".
What does gross position...
We have an Ajax lathe fitted with Fagor 800T controller.
Can anyone advise what software we need on a PC so that we can upload and download programs from this controller please?
Many thanks but I have managed to get copies of the schematics now.
Regards
Mike Conboy
I have a manual and schematics now but thank you to yourself and everyone else that offerred their help.
The drawbar is hydraulically operated from a pump so does not require compressed air.
On the wall or the rear of the machine there should be a regulator and gauge.
6.5 Bar or 100 psi is about...
Have you checked there is a good air supply?
Main thing I need is electrical schematics. If I can get a copy of a manitenance manual that would be even better. The machine is a series 1 Interact fitted with TNC145 controller.
Can anyone let me know where I can get a maintenance manual or at least an electrical schematic for a Series 1 Interact.
[email protected]