Hi, I know this is an old thread, but hopefully you can still give me some info. So I have a 2008 Hurco VMX24 and I need to add an indexer to it. Would a Nikken CNC-200 LF work as an indexer...
Type: Posts; User: m_mcgranahan
Hi, I know this is an old thread, but hopefully you can still give me some info. So I have a 2008 Hurco VMX24 and I need to add an indexer to it. Would a Nikken CNC-200 LF work as an indexer...
I bought a pair of Kurt CarvLock 6" dual station vises for a project. They projects did not work out, so I'm offering these vises for sale. One vice currently has aluminum jaws and the other 1...
Hi,
So I have finally gotten my bmc2416 running (1999 model year, Ultimax 4 software) I cannot get the servos to power up. I have air pressure and I do have the terminal up and working. The...
HI
I am looking at a Hurco bmc 30 that is currently throwing an Internal motion control error on Axis S, code 11. Has anyone ever ha that? Or has anyone used a 3rd party to fix Hurco...
I should point out that only use conversational programming presently, so that is a big deal in my decision. As I recall the ultimax 2 is able to do 3d contouring. Is that correct?
Hi,
I currently own AK MB one acts than has the AMTS emulator card and serial port input. But I am really tempted to purchase BMC20 that has the ultimaX to controller on it. How much better...
I would also love to get a hold of a copy of that manual.. Would it be possible to email it to me? Maybe a pm to get my email???
Hi,
I know the thread is pretty old, but it seems like I have some slop in my bed. I saw several mentions about adjusting things, but I can't seem to find pics or more info about how to...
Hi,
My KMB-1 makes a fair amount of chatter when cutting and I would like to try to adjust the ball screws lash (That's the term I recall hearing anyways) Can someone tell me how to do this? ...
Hi,
I am moving up to the Twin Cities area and I need to move my Hurco kmb-1 up there. So far the plan is to load it onto a car trailer and take it up there. I am looking for any helpful...
HI,
SO I cut a new hole (Same cut into an atv swing arm I am sleeving) I found that I had about .002-.003 of play in the fixture I was using to hold the swing arm upright. I managed to get...
Hi,
It was regular cut going from 26mm hole to 1.125" hole. Cut was pretty slow (35 pecks to go 1.23" down)
Hi,
I will have to check that end mill to see if the flutes are the same. (That would make sense why it did it one one and not the other end mill)
Hi,
I have owned the machine for about 2 years now. T
he mill is older, it made Dodge transmission parts for decades...
I did not use a finish pass.
It is in Alum.
I don't know...
Hi,
I am running my KMBX-1 via conversational programming and today I milled a hole that was supposed to end up 1.125" instead it ended up 1.130"! I have tripple checked all my settings and I...
Hi, I am programming in Conversational mode via the keypad on the stock mill control cabinet. (I am pretty sure the KMBX-1 is too old for Winmax or Ultimax, isn't it?)
Hi,
So I am trying to use a .375 mill to cut a .5 in wide slot and using conversational programming in "frame 2p" (#8) and "Pocket" (#4) mode and every time I go to start cutting the mill shuts...
HI,
I am asing the amts tape emmulator on my KMBX-1 and each time I try to save a program I get a tape error #2 What am I doing wrong?
Thanks
God bless...
Mark
Hi,
I found this study on the use of Palm oil for cutting lube. Thought it deserved a look.
Thanks
God bless...
Mark
http://eprints.utm.my/9729/1/78055.pdf
Hi, so does anyone have a schematic/ description of what each of the relays on that relay board with all the "Ice cube" relays do?
THanks
God bless...
Mark
HI,
SO I can't seem to get my KMB-1 to output the different signal to the relays that run my vfd.
As it was hooked up when I bought it...
Mill TB2 term 7 fwd
TB2 Term 9 rev
...
HI,
SO I went to try out my new face mill tonight and realized that it is a counter clockwise unit. How do I spin the spindle ccw in conversational programming?
THanks
God bless...
...
Thanks
Hi,
Does anyone know the difference between SNC 63 carbide inserts and SEC 63 carbide vs SPC63 carbide milling inserts?
Thanks
God bless...
Mark
Yeah that is sounding like a much better idea... I could see keeping under .050 and being able to drive it with the 5 hp spindle motor on the kmb1
Hi,
So I needed a cheap face mill to bring 4" aluminum to size on my kmb-1. I bought a used 6" face mill. It came today and it weighs 15lbs! I am afraid that I could trash my mill with that...
Hi,
So I am finding the limits of conversational programming on my KMBX-1. IS there a good resource on how to learn G-code for this mill?
Thanks
God bless...
Mark
Hi,
Since it is all three axis, I would say it is likely a problem with the drive bards or power supply. Have you tried calling Buddy? Hurco Mill - Autobend, Parts Service Sales Repair INDEX ...
Hi,
Ok, seeing none, I made one. there is one for G-code and one for conversational.
God bless...
Mark
Hi,
I am looking to get programming sheets for conversational programming on my KMBx-1 mill. Anybody have a clear on they can spare or an excell version?
Thanks
God bless...
Mark