Glad you got it working. If I recall you have to do both 4077 and 4073. One is orientation with M19 and other is orientation during tool change.
Type: Posts; User: bob1371
Glad you got it working. If I recall you have to do both 4077 and 4073. One is orientation with M19 and other is orientation during tool change.
Thanks for all the input.
:cheers::cheers:
Thanks for the info, I found a program called traceart and it did a pretty good job. (free version adds their logo to the dxf though. :( )
Hello,
Any way I can import this into gibbs???
http://img843.imageshack.us/img843/2382/eaglewithfeatheredflame.jpg
thanks
Running on my desktop, built in graphics on mobo, NVIDIA GeForce 6100.
Everything is up to date.
Win7 Ultimate
AVG Free AV
Network Magic
Here is a short screen video of what I am doing. I first do it with text running clockwise and you can see everything looks OK. I then try it with last name counter clockwise and just change the...
Thanks cadman, will mess with it for a while and see what I come up with. Like i said it first post it is OK as long as I stay with the clockwise flow but when I do the first name clockwise and the...
Thanks Cadman, I have attached both vnc files. Let me know if it's not what ya need.
Hello,
Fairly new to gibbscam and have a problem I can't figure out. Working with 2" round stock and trying to put circular text on the face.
In Gibbs I make a 2" circle on a x1 y1 center line...
Hello,
Looking for any manuals I can get for this. Mostly in need of Operator manual.
Thanks,
Bob
We have 3 MA-400's in use. Production shop running cast aluminum parts. Overall very happy with these. Here are a few problems that we have seen on all 3 machines.
1. Doors and Locks- The doors...
Great share,
thanks
Bob
Also look for the little tick mark in the rung \ this will invert the output logic.
Bob
Here is a well written book to get you started.
http://www.eod.gvsu.edu/~jackh/books/plcs/
Bob
These will be up to the Machine Builder. Please post Name and Model and someone may be able to help or contact MTB.
Bob
Thats the # I was looking for. I checked at work last night.
thanks.
bob
Hello,
Last year I attended several classes at Fanuc. One engineer that went has talked our company into purchasing a trainer like they use in the class. The fanuc quote was $$$....We could just...
I would guess that the parameter that sets your "Max Cutting Feedrate" is set to Zero so when you give it a G1 x... y... F100 your feedrate is above the set max. Is the 5011 the actual parameter or...
The P Can while powering up tells the NC to ignore soft limits that are set in parameters. This allows the machine to make it to limit switch and set zero position. If you are overtraveling at this...
The "P Can trick" will tell the machine to ignore the Soft overtravel limits set up in parameters. This will allow the machine to actually reach the limit switch and properly home out.
More info...
I am going to pass this info on too our engineering staff. I see a few machines which may benefit from something like this. Also you link above doesn't work.
http://productionpal.googlepages/home
...
A couple more that may be of interest.
903 bit 5=1 (125 programs input)
915 bit 7=1 (200 programs)
Bob
Parameter 901
Bit 1=1 (memory is 120M)
Bit 2=1 (memory is 80M)
Bit 3=1 (memory is 40M)
Bit 4=1 (memory is 20M)
This isn't in Meg's like you may be used to but I believe it actually referred...
Thanks guys and gals....This will be a big help.
Bob
Hello,
I am looking for a manual in pdf format.
Fanuc Servo Motor B Series
I/O Link Option
Maintenance Manual
B65245EN/02 ( I believe the 02 is a revision # so may different.)
I you have...
We have a couple mazak's with fanuc 160i controls. All our others have Mitsubishi control as Al mentions. This will get ya started.
...
If you have limit switches for the zero return check to ensure they are not loose, that the rollers don't have flat spots and the dogs are ok. It could be homing to a different position during th...
Here is some info I posted a couple weeks ago.
http://www.cnczone.com/forums/showthread.php?t=41045
Bob
Diagnostics
#452 Turret adjust switch. Make all 1's then cycle estop to clear tool clamp alarm and allow you to tool change to another tool.
#016 X axis home limit (Bit 5)
#017 Y axis home limit...
Alarms on a AC Spindle Servo Unit, Serial Interface S Series
These were copied from another source. I cannot verify they are all correct.
“A” Program Rom abnormality (Not Installed)
AL-01...