some thread information I preffer the M33 M73 for thread because I got a better finish,
Type: Posts; User: kawarta
some thread information I preffer the M33 M73 for thread because I got a better finish,
if you put G20 or G21 in okuma control you will get an alarm okuma use the optional parameter bit line 3 bit 0 to change the units if yuo use 0=inch 1=metric this is for OSP5020/OSP7000
some info I hope ththis help
may be it is to late by the way I am Attaching a small picture of the chuck clamp unclamp diagram located on RU1 You need to define which relay need to be changed
Hello there, guys I am traying to attach some manuals but i Can't because they are to big
LB15 DIag Elect 5020L A10008 KP0-0030-04.pdf - Your file of 3.33 MB bytes exceeds the forum's limit of...
hello there this is the droopbox link is the first time that I am trying to upload this kind of link hope this works
https://www.dropbox.com/s/hwmp42jaekukvnc/LE15-145-R02%20lb300partbook.pdf?dl=0
Did you got the electrical diagrams?
yes you are correct tea I am attaching a P300M control proposal
hello did you got the parts book? if not please let me know I have it but is too big to attach it thru this page but let me know and I can send the information that you need
i am attaching you a proposal for america from the Genos M560 I hope this help
hello somebody knows if i need to add a kind of interface to the machine to reconize the signals from the tool breakage detection? because i would like to add a BK MIKRO8 to an Okuma machine MA500H ...
i did request help to okuma and they sent me comments i am attachhing those like a pdf
i attached info to open parameters on okuma
on the operation and maintenace manual is the procedure to align the Tailstock, turret and headstock.
good look
everything looks like you are having problems with the fiber optics on your electronic units now you need to identify which one has the problem or review if they are properly inserted
i have the parts book, operation and maintenance manual for now but they are a big size around 40mb each.
is an MA400HB or an MC40VA?
do you have a kind of scketch? on okuma control u can use G97 S1000M03 M8 M42 with out problems, I am attaching one programe made with ADMAC or IGF
hello guys i am having problems with a cadet mate on Y axis linear bearing anybody know where can i buy a new one? anybody has experience with THK ?
thank you
:) i am agree live it on a safe place
saludos
i like okuma more than DOosan and okuma has a very good support on mexico
please also check the backlash parameter this should be on 0.010mm or less
i have it OSP5020M ME34-008-R4-1092
looks like you have a short circuit on the Power supply
Antonio which the Okuma control OSP U100L/E100/P100 or 200 please check the gear runout this must be between 0.010 or 0.020mm also you has to adjust the distance from the magnetic encoder and the...