wondering if anyone knows of some software for stair stringers that would generate g-code to be used with cnc router
Thanks All
Type: Posts; User: slowdigits2
wondering if anyone knows of some software for stair stringers that would generate g-code to be used with cnc router
Thanks All
The machine runs fairly decent received a lot of damage being shipped they used bricks as packing, bearings went after 1 year in spindle no warranty bed damage it did not run out of the box like...
Hoping someone here has the answer we have a Mazak VCS 430A Mazatrol, batteries ran low,machine off on the weekend before they got changed, new Batteries are in but when we do a tool change the arm...
Hi all
wondering if anyone has a fadal 4020 88 HS post processor that will work in aspire
Thanks in advance
Steve
SO I FOUND A PP that will work partly I still need to go in and edit the footer and header to get it to run on the machine, I have upload the PP I use, the file it generates (charpy1) and the file...
Im looking for a POST PROCESSOR FOR MAZAK VERTICAL CENTER SMART 430A EIA/ISO programming to use in Vectric to save tool paths that support I j k arcs and circles to run on the Mazak 430A and that...
http://www.cnczone.com/forums/attachment.php?attachmentid=374394&stc=1 I have cut a lot of vinyl using the widget works cutter works awesome
https://youtu.be/05-rH2S3YCs
Thanks for the reply I have tried tape ran the length to catch all parts sometimes it worked sometimes not I am now trying the combination of tabs and a .020 onion skin so far so good hoping I can...
Hoping someone here may have a suggestion, right now I have made a small vacuum box to hold 6"x 48" pcs of wood that Im cutting out parts for a friend if I try to cut them without tabs after 12 to ...
No I only have this picture I have tried to convert it many times and many different ways but I never get a good result
To make a tool path from
Nobody?
Been stumbling around trying to find the answer to a problem I have created a wrapped job set and then try to import a 3d relief stl to wrap it around the cylinder, its set to wrap the x values...
Is there anyway to bring this graphic into aspire and create a tool path to cut it out I have a friend that asked if i can cut this out
Thanks...
Need some help, I have a friend that would like me to make this for him I cannot seem to convert it to anything that i would be able to make tool paths with, If anyone could help me out that would...
Thanks its perfect just checked it out I will post some pics when I cut them
its 4.5 I could not delete the other drawings for some reason?
Thanks
Wow thanks I will check it out in the morning thanks again
the length is 8.8 inches the width is 4.5" the thickness is 1.5", dia of slots are 1.581" radius is.790 none of them go all the way through the bottom slots are so you can stack them, i did notice...
I was hoping for a STL I will craft a drawing and dimensions and load it up here thanks for the reply
- - - Updated - - -
Thanks Jeff I will draw something up
Hi guys/girls I was wondering if someone out there could help me out I have been struggling with making a 3d model of a poker chip tray with little success , I'm sure for someone with skills this...
the Z height is not the problem I use a touch off plate (my z depth is within .003) the problem is when using the rastering rounding tool path from aspire it cuts correct on the first pass taking...
ok I have tried in aspire and created rounding tool path both raster and rounding around the cylinder it does try to cut the file but does not seem to cut in the correct spot is it a post problem or...
ok I have tried in aspire and created rounding tool path both raster and rounding around the cylinder it does try to cut the file but does not seem to cut in the correct spot is it a post problem or...
This is why I posted on the Zone hoping to save someone the grief I went through I fortunately got all my money back your story sound exactly like mine word for word, I think even with lawyers you...
this is why i tried to post on here not to deal with him i never did even get my machine from him, what is wrong with your whats is it doing or is it not even powering up is your machine blue?
DO A SEARCH FOR Jack Dong he is a rep I have bought my machine which was a 48x96 they have any machine to suit your needs, customer service is excellent Jack will make sure you get what you need,...
Well I finally got my Machine hooked up and running after some delay because of damage during shipping but Jack Dong from Shandong Yishun CNC Machinery CO., Ltd. where I purchased it from made sure...
Hoping I can get some answers I have a spindle for a botched cnc router build from Gantry CNC sign services ( Kevin Tyler) DO NOT DEAL WITH THIS GUY He is from Vernon BC Canada Kijiji scam but that...
don't do not repeat do not
actually try 2 places first guy envy design in London Ontario after 3 months day before pickup one of his employees sprayed down the machine fried all the electronics, asked for my money back took...
well I think it has a lot with who you deal with a broker or the actual company that makes them I have sent them all the wiring information its in the quote and I'm confident with all the calls I...