Thank you islam,
check my build
http://www.cnczone.com/forums/233994-post14.html
http://www.cnczone.com/forums/diy-cnc_router_table_machines/29390-choosing_drive_screw_motor_long-3.html
...
Type: Posts; User: fractaledge3
Thank you islam,
check my build
http://www.cnczone.com/forums/233994-post14.html
http://www.cnczone.com/forums/diy-cnc_router_table_machines/29390-choosing_drive_screw_motor_long-3.html
...
Well done ya islam ... Keep up the good work :)
Hi 6bx,
My Machine is also keep moving after starting ncstudio!!!
How did you solve this problem?
did you Ground the machine or is it software problem?
Thank You
Hi zaheer,
Happy Eid.
Try the software in that link
http://www.tamasoft.co.jp/pepakura-en/
its a great one.
Osama
Hi,
You can see the attached drawing I hope it can help, also if the software change the offset when you dos not select the offset rectangle, you may replace that rectangle with small two dots one...
Hi Jacqui,
There is another way that you can use
1- Power up the machine then the head will return to its home position (assume that it is on top left).
2-try to measure the distance between the...
Hi Arturo,
There is a video file for the complate installation process in the www.hxlaser.com but it is very big file I already downloaded the files and re-compressed it to %10 and put it in here ...
Hi,
See my post at
http://www.cnczone.com/forums/showthread.php?p=327729#post327729
I hope it can help.
Hi,
Now I get your software manual, I can see some of its screens, I think you can apply deferent modes to your shapes (Cutting and engraving), select and send all the shapes and change the...
Can you run the program as demo without the dongle, if it runs you can Zip it(right click on the setup folder then select send to compressed zipped folder) and attach it here
Hi Luis,
Good idea [If accepted by Niklas :) ], We are using some kind of masking tape(used with vinyl as backup to remove and past) to do it .
We need to cut the shape totally but we need to get some half cut area to keep that shape within its material like the wooden or acrylic kits, so The main problem in dashed line that there will be...
Hi Jacqui,
Is your machine has a manual control for the power or is it from the software?
-Don't use the max power for now just 80% to 90%
-Try to use min speed with 50% power and see the result...
Hi Jacqui,
Is there any help file or PDF with the software? if yes, attach it then I can give you some help
also is there any web sight for the software?
Osama
Hi All,
To get a good result in photo engraving here are some steps using CorelDraw and Photoshop I post it in
http://www.cnczone.com/forums/showthread.php?p=327729#post327729
other some steps...
Hi Jacqui,
What is the software that it came with your machine?Your machine is capable of cutting a vectors and curves it depends upon the software setting, you should to open a vector file(DXF or...
Hi Luis,
What is the type of your laser machine, is it a chines laser?
Hi Niklas,
Here is another method for complicated shapes.
-Select the knife tool (use it to open any curve).
-Disable auto close-on cut (knife tool options on tool bar).
-Cut a point on each...
Hi Niklas,
There are two cases:
1- If the shapes on the sheet are just a repeats then just do that steps with the first shape then repeat it.
2-If the shapes on the sheet are not the same, then...
Also if some one has any problem with engraving images, see my post here
http://www.cnczone.com/forums/showthread.php?p=327729#post327729
Hi Niklas,
Here is the steps in CorelDraw:
First assume that your shape is a circle and you need two small curves on its circumstance to be a half cut (gap) [see the attachments].
-Be sure that...
Also if some one has any problem with engraving images, see my post here
http://www.cnczone.com/forums/showthread.php?p=326210#post326210
Hi,
Here is some testing with an EPS file imported to corelDraw R12 then exported from corelDraw as dxf (AutoCad R14) file, I then reopen it in corelDraw and other CAD programs with no problem. Try...
Hi Carl,
What are the files type can be opened or imported to AP100 software, also if you can attach your original eps file and exported dxf and final nc code, I can do some trials to help.
Hi,
As I know there is no direct information to show how to get a good results in engraving images by using any software, but in general the concept is to convert the image to gray scale mode then...
Hi FERCHO,
Download the attached zip file and try to engrave the BMP inside it by your machine, then tell me the result, but don't try the jpg file, it is for illustration only.
Hi FERCHO,
take a look to the attached procedures in CorelDraw, you can follow it to convert your photos to a correct B&W that can be used in your machine software.
Hi Roberto,
Your machine RS3040 , it has only a potentiometer for manual laser power adjustment and there is no Power controller with PWM to control the machine power from the software.
Hi Roberto,
Try this Offsets for Origin Settings
X axis=37
Y axis=72
the start will be from top left just down the table mounting screw, you may fine tune this offsets according to your machine.
Hi Robert,
You can use DB-9 Male-Female Null-Modem cable, also You can see the attached images for the Wiring and Pin outs if You decided to make the cable by yourself.
the machine cable only use...