Fresmak Clamping Solutions
Products
INNOVATION is not an option is OUR ATTITUDE since 1967
250
Fresmak S.A.
Machine vices
Arnold Mat Hydraulic
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centers (vertical and horizontal).
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centers.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Angle driver for handle clearance upon request.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centers.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Angle driver for handle clearance upon request.
Arnold 5X Mechanical
|
Expanding mandrel
Fresmak S.A.
Machine vices
High Pressure ARNOLD 5X, are fitted with a clamp as far away as possible form the body and therefore the machine bench.
- Accuracy of 0.01 mm in clamping repeatability.
- Designed in two sizes M and L with an adjustable force of up to 30 kN in the uppermost part.
- Essential for highly specialized machining process such as titanium and aluminum, which requires totally different clamping forces.
- They maintain their constant length irrespective of the size of the work piece, being specially designed for the use in 5-axis machining centres.
- Exterior elements needed for achieving high pressure, which usually make 5X machining work difficult, are not required with this model.
- Power regulator available in M size.
- Fitted with a high pressure mechanical intensifier.
- Side windows for quick cleaning and swarf removal.
- Customized jaws available according to the shape of the work-piece.
SIZE M
- Power regulator optional.
SIZE L
- With power regulator.
- Bigger clamping field than size M.
- Accuracy of 0.01 mm in clamping repeatability.
- Designed in two sizes M and L with an adjustable force of up to 30 kN in the uppermost part.
- Essential for highly specialized machining process such as titanium and aluminum, which requires totally different clamping forces.
- They maintain their constant length irrespective of the size of the work piece, being specially designed for the use in 5-axis machining centres.
- Exterior elements needed for achieving high pressure, which usually make 5X machining work difficult, are not required with this model.
- Power regulator available in M size.
- Fitted with a high pressure mechanical intensifier.
- Side windows for quick cleaning and swarf removal.
- Customized jaws available according to the shape of the work-piece.
SIZE M
- Power regulator optional.
SIZE L
- With power regulator.
- Bigger clamping field than size M.
Arnold 5X Mechanical with pressetting
|
Machine vice
Fresmak S.A.
Machine vices
High Pressure ARNOLD 5X, are fitted with a clamp as far away as possible form the body and therefore the machine bench.
- Accuracy of 0.01 mm in clamping repeatability.
- Designed in two sizes M and L with an adjustable force of up to 30 kN in the uppermost part.
- Essential for highly specialized machining process such as titanium and aluminum, which requires totally different clamping forces.
- They maintain their constant length irrespective of the size of the work piece, being specially designed for the use in 5-axis machining centres.
- Exterior elements needed for achieving high pressure, which usually make 5X machining work difficult, are not required with this model.
- Power regulator available in M size.
- Fitted with a high pressure mechanical intensifier.
- Side windows for quick cleaning and swarf removal.
- Customized jaws available according to the shape of the work-piece.
SIZE M
- Power regulator optional.
SIZE L
- With power regulator.
- Bigger clamping field than size M.
- Accuracy of 0.01 mm in clamping repeatability.
- Designed in two sizes M and L with an adjustable force of up to 30 kN in the uppermost part.
- Essential for highly specialized machining process such as titanium and aluminum, which requires totally different clamping forces.
- They maintain their constant length irrespective of the size of the work piece, being specially designed for the use in 5-axis machining centres.
- Exterior elements needed for achieving high pressure, which usually make 5X machining work difficult, are not required with this model.
- Power regulator available in M size.
- Fitted with a high pressure mechanical intensifier.
- Side windows for quick cleaning and swarf removal.
- Customized jaws available according to the shape of the work-piece.
SIZE M
- Power regulator optional.
SIZE L
- With power regulator.
- Bigger clamping field than size M.
ARNOLD CLASSIC Hydraulic
|
Other clamping device
Fresmak S.A.
Machine vices
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Two part straight vice option available.
VERSIONS
Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Two part straight vice option available.
VERSIONS
Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
Arnold Classic Hydraulic with presetting
|
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Two part straight vice option available.
VERSIONS
Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Two part straight vice option available.
VERSIONS
Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
Arnold Classic Mechanical
|
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Two part straight vice option available.
VERSIONS
Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Two part straight vice option available.
VERSIONS
Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
Arnold Durmak Mechanical
|
Other clamping device
Fresmak S.A.
Machine vices
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.
- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws
within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Suitable for working with hardened inserts. The positioning of the inserts determines the clamping
capacity of the vice.
- Fixed jaw with several insert settings. Movable swinging jaw with several insert settings.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split option upon request.
- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws
within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Suitable for working with hardened inserts. The positioning of the inserts determines the clamping
capacity of the vice.
- Fixed jaw with several insert settings. Movable swinging jaw with several insert settings.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split option upon request.
Arnold Durmak Mechanical with pressetting
|
Machine vice
Fresmak S.A.
Machine vices
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.
- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Suitable for working with hardened inserts. The positioning of the inserts determines the clamping capacity of the vice.
- Fixed jaw with several insert settings. Movable swinging jaw with several insert settings.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split option upon request.
- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Suitable for working with hardened inserts. The positioning of the inserts determines the clamping capacity of the vice.
- Fixed jaw with several insert settings. Movable swinging jaw with several insert settings.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split option upon request.
Arnold Mat Hidraúlica con regulador
|
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Angle driver for handle clearance upon request.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Angle driver for handle clearance upon request.
Arnold Mat Mechanical
|
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Two clamping possibilities of the work piece, either towards the fixed head or in reverse direction.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
TIPS FOR USE
- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Two clamping possibilities of the work piece, either towards the fixed head or in reverse direction.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
TIPS FOR USE
- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
Arnold Mat Mechanical with presetting
|
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Two clamping possibilities of the work piece, either towards the fixed head or in reverse direction.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
TIPS FOR USE
- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Two clamping possibilities of the work piece, either towards the fixed head or in reverse direction.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
TIPS FOR USE
- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
Arnold MB2 Mechanical
|
Other clamping device
Fresmak S.A.
Machine vices
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.
- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws
within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
- Split vice as standard item available.
- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws
within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
- Split vice as standard item available.
Arnold MB2 Mechanical with pressetting
|
Machine vice
Fresmak S.A.
Machine vices
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.
- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
- Split vice as standard item available.
- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
- Split vice as standard item available.
Arnold Mechanical with presetting
|
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Two part straight vice option available.
VERSIONS
Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Two part straight vice option available.
VERSIONS
Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
Arnold SC 5X
|
Other clamping device
Fresmak S.A.
Machine vices
ARNOLD SC vices are compact, high and self-centring and maintain constant length.
- Accuracy of 0,01 mm in clamping repeatability.
- Accuracy 0,02 mm in centring.
- Designed to work on machining centres with small tables, as well as, within 5 controlled axes machining centres.
- Compact design with exterior guides that avoid deformation as the clamping force is distributed throughout the width.
- Steel components.
- Consealed vice: Totally closed to prevent chips from getting in.
- Threaded right-left spindle which can be operated with a standard key.
- Clamping force ranging from 10 to 35 kN, depending on the model.
- Interchangeable jaws can reach a height of 125 mm, which means they can overcome the biggest obstacle for this type of work by avoiding collisions with the machine spindle or the rotation of the table.
- All standard jaws are may be used by adding soft jaws first.
- Suitable for clamping round work pieces.
- Base plate available for raising the vice available.
- Equipped with a mechanical spindle without high pressure.
- Supplied with high jaws specially designed for 5X machines, which avoid collisions of the spindle and allow for short tools to be used.
- Grease points allow for the vice to always be in optimal conditions for use.
SPECIAL JAWS
Possibility of working with machined soft jaws according to the shape of the workpiece.
- Accuracy of 0,01 mm in clamping repeatability.
- Accuracy 0,02 mm in centring.
- Designed to work on machining centres with small tables, as well as, within 5 controlled axes machining centres.
- Compact design with exterior guides that avoid deformation as the clamping force is distributed throughout the width.
- Steel components.
- Consealed vice: Totally closed to prevent chips from getting in.
- Threaded right-left spindle which can be operated with a standard key.
- Clamping force ranging from 10 to 35 kN, depending on the model.
- Interchangeable jaws can reach a height of 125 mm, which means they can overcome the biggest obstacle for this type of work by avoiding collisions with the machine spindle or the rotation of the table.
- All standard jaws are may be used by adding soft jaws first.
- Suitable for clamping round work pieces.
- Base plate available for raising the vice available.
- Equipped with a mechanical spindle without high pressure.
- Supplied with high jaws specially designed for 5X machines, which avoid collisions of the spindle and allow for short tools to be used.
- Grease points allow for the vice to always be in optimal conditions for use.
SPECIAL JAWS
Possibility of working with machined soft jaws according to the shape of the workpiece.
Arnold SC Vice Self-Centring
|
Expanding mandrel
Fresmak S.A.
Machine vices
ARNOLD SC vices are compact, high and self-centring and maintain constant length.
- Accuracy of 0,01 mm in clamping repeatability.
- Accuracy 0,02 mm in centring.
- Designed to work on machining centres with small tables, as well as, within 5 controlled axes machining centres.
- Compact design with exterior guides that avoid deformation as the clamping force is distributed throughout the width.
- Steel components.
- Consealed vice: Totally closed to prevent chips from getting in.
- Threaded right-left spindle which can be operated with a standard key.
- Clamping force ranging from 10 to 35 kN, depending on the model.
- Interchangeable jaws can reach a height of 125 mm, which means they can overcome the biggest obstacle for this type of work by avoiding collisions with the machine spindle or the rotation of the table.
- All standard jaws are may be used by adding soft jaws first.
- Suitable for clamping round work pieces.
- Base plate available for raising the vice available.
- Equipped with a mechanical spindle without high pressure.
- Jaws may be rotated: Large clamping field with 2 jaw positionings.
- Grease points allow for the vice to always be in optimal conditions for use.
- Accuracy of 0,01 mm in clamping repeatability.
- Accuracy 0,02 mm in centring.
- Designed to work on machining centres with small tables, as well as, within 5 controlled axes machining centres.
- Compact design with exterior guides that avoid deformation as the clamping force is distributed throughout the width.
- Steel components.
- Consealed vice: Totally closed to prevent chips from getting in.
- Threaded right-left spindle which can be operated with a standard key.
- Clamping force ranging from 10 to 35 kN, depending on the model.
- Interchangeable jaws can reach a height of 125 mm, which means they can overcome the biggest obstacle for this type of work by avoiding collisions with the machine spindle or the rotation of the table.
- All standard jaws are may be used by adding soft jaws first.
- Suitable for clamping round work pieces.
- Base plate available for raising the vice available.
- Equipped with a mechanical spindle without high pressure.
- Jaws may be rotated: Large clamping field with 2 jaw positionings.
- Grease points allow for the vice to always be in optimal conditions for use.
Arnold Twin hydraulic
|
Other clamping device
Fresmak S.A.
Machine vices
High pressure ARNOLD TWIN vices are capable of clamping two pieces simultaneously.
- Accuracy of 0.01 mm in clamping repeatability.
- Suitable for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- Clamping force is 25/50 kN, depending on the size.
SPECIAL JAWS
Possibility of working with machined soft jaws according to the shape of the workpiece.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Angle driver for handle clearance upon request.
- 6 different clamping types, interchanging the position of standard jaws: either by rotating the side jaws and fitting the stepped jaw in the middle, or by fitting any of the central jaws on the side closets to the handle.
- To clamp a single workpiece, place it in Station II.
3RD HAND MECHANISM
Function which permits first one work-piece to be clamped and then the other, enabling it to be fitted in the vertical position.
Operation of the 3rd Hand: By turning the handle bring the moveable jaw I towards the work-piece situated in station I until it is clamped.
Maintaining the turn bring moveable jaw II towards the work-piece situated in station II until it is clamped.
Continuing with the turn, jumpstart the intensifier and start to clamp with high pressure.
- Accuracy of 0.01 mm in clamping repeatability.
- Suitable for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- Clamping force is 25/50 kN, depending on the size.
SPECIAL JAWS
Possibility of working with machined soft jaws according to the shape of the workpiece.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Angle driver for handle clearance upon request.
- 6 different clamping types, interchanging the position of standard jaws: either by rotating the side jaws and fitting the stepped jaw in the middle, or by fitting any of the central jaws on the side closets to the handle.
- To clamp a single workpiece, place it in Station II.
3RD HAND MECHANISM
Function which permits first one work-piece to be clamped and then the other, enabling it to be fitted in the vertical position.
Operation of the 3rd Hand: By turning the handle bring the moveable jaw I towards the work-piece situated in station I until it is clamped.
Maintaining the turn bring moveable jaw II towards the work-piece situated in station II until it is clamped.
Continuing with the turn, jumpstart the intensifier and start to clamp with high pressure.
Jaw with keyways BLOCK-SC
|
Machine vice
Fresmak S.A.
Machine vices
Jaw: Soft jaw with fixing holes
Material: F-1550 (18crMoS4) Can be hardened
Assembly: Keyways
Material: F-1550 (18crMoS4) Can be hardened
Assembly: Keyways
