ARNOLD SC vices are compact, high and self-centring and maintain constant length. - Accuracy of 0,01 mm in clamping repeatability. - Accuracy 0,02 mm in centring. - Designed to work on machining centres with small tables, as well as, within 5 controlled axes machining centres. - Compact design with exterior guides that avoid deformation as the clamping force is distributed throughout the width. - Steel components. - Consealed vice: Totally closed to prevent chips from getting in. - Threaded right-left spindle which can be operated with a standard key. - Clamping force ranging from 10 to 35 kN, depending on the model. - Interchangeable jaws can reach a height of 125 mm, which means they can overcome the biggest obstacle for this type of work by avoiding collisions with the machine spindle or the rotation of the table. - All standard jaws are may be used by adding soft jaws first. - Suitable for clamping round work pieces. - Base plate available for raising the vice available. - Equipped with a mechanical spindle without high pressure. - Supplied with high jaws specially designed for 5X machines, which avoid collisions of the spindle and allow for short tools to be used. - Grease points allow for the vice to always be in optimal conditions for use. SPECIAL JAWS Possibility of working with machined soft jaws according to the shape of the workpiece.