538,167 active members*
2,718 visitors online*
Register for free
Login Register
Geiger Maschinen-Vertrieb

Contact

Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
James-Watt-Str. 12
72755 Metzingen
Germany
+49 (0)7123/18040
+49 (0)7123/18384

Route planner

Route planner

TRUMPF TRUMABEND V 85

Asking price


  • Reference number 1049-695168
    Manufacture Year 1996
    Operation Hours not applicable
  • Metal working machine
  • Sheet Metalforming machines
  • Pressbrakes
  • TRUMPF Delem DA 65T
  • pressure
    85 t
    chamfer lenght
    2000 mm
    distance between columns
    1750 mm
    Control
    TRUMPF Delem DA 65T
    total power requirement
    10 kW
    weight of the machine ca.
    7,5 t
    dimensions of the machine ca.
    m
  • T R U M P F (Germany)
    CNC - Controlled Hydraulic Press Brake
    Model TRUMABEND V 85, year 1996 Serial No. 88 31 52
    __________________________________________________________________________________

    Pressure, max. 85 to
    Working width, max. 2.050 mm
    Working width between columns 1,750 mm

    Side daylight of each column 410 mm
    Max. distance
    between upper and lower tool holder w/o tools 350 mm
    Adjustment of upper tool holder approx. 300 mm
    Table width approx 105 mm
    Height of Table from floor approx. 1.050 mm

    Max. stroke 215 mm
    Stroke, bending speed 1 - 10 mm/sec
    Stroke, rapid traverse 200/135 mm/sec
    Adjustment range of back gauge, approx. 800 x 300 (vertical) mm

    Total electrical load, approx. 10 kW - 400 V - 50 Hz
    Weight, approx. 7,5 to

    Accessories / Special Features:
    * The stroke movement of the upper toolslide is driven by two hydraulic
    pistons and proportional valves and controlled by two electronic
    measurement scales.
    Therefore it can be achieved a tilting line of the upper tool of
    approx. 10 mm
    * TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis
    like:
    Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on
    the pendant control and screen with grafics.
    * CNC-Controlled Cambering by separate control unit inside the table.
    * Hydraulic driven fast clamping of upper and lower tools
    * On backside of machine mounted a gauge stop slide controlled in 2 axis
    ( =R a.X-Axis) in vertical stroke and forward and backwards, three
    sheet metal stopfingers.
    * Two-handed release on mobile control stand, and/or foot switch.
    * Pressure Manometer for the Hydraulic System and oil filter
    * In front of machine there are 2 lengthwise adjustable sheet metal
    supports.
    * Various Bending tools smaller size,
    * Swivable Safety covers on side and backside doors with plexi-glass
    shields, etc.

    Condition : Good to very good – stable design.
    Machine can be inspected under power.
    Delivery : Ex stock, as inspected.
    Payment : Net, after conclusion of contract.



    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from Hans-Jürgen Geiger Maschinen-Vertrieb GmbH