EX-CELL-O XK 225

•  
  Reference number 1049-346254

  Manufacture Year 1987

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Gear Cutting Machines
• Type of Machine
  VARIOUS GEAR MACHINERY
• Sort of Machine
  Spline Rollers
• Manufacturer
  EX-CELL-O
• Technical data

  rolling capacity max.

  NA t

  workpiece diameter

  38 mm

  workpiece length

  500 mm

  total power requirement

  24 kW

  weight of the machine ca.

  10 t

  dimensions of the machine ca.

  m

• Description
  Max.Ø tool slide stroke 760 mm
  Max.Ø rack length 610 mm
  
  Length of workpiece between centres, approx. 500 mm
  Max. tooth width / profile width 92 mm
  Max. workpiece Ø 38 mm
  Tailstock stroke on outboard support, hydraulic, approx. 500 mm
  
  Module range 0.3 - 1.3
  
  Total electrical load, approx. 24 kW - 380 V - 50 Hz
  Weight, approx. 10,000 kg
  
  Accessories / Special Features
  * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control.
  * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long.
  * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l.
  * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc.
  
  Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations.
  
  
  
  
  Condition : Very good. Machine can be inspected under power.
  Delivery : Ex stock, as inspected.
  Payment : Net, after conclusion of contract.
  
  Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
  
  This ad was created with MODUL MWS - the software solution of LogoTech.
• State
  Used

I like it 0