502,731 active members
6,833 visitors online
Register for free
Login Register
Gressel Spanntechnik - Banner

Gressel Spanntechnik

Products
01. Machine vice
01. Machine vice
gripos
Gressel AG
Machine vices
01. Machine vice
gripos has been designed for clamping raw parts and finished workpieces. A wide range of accessories ensures the versatility of the equipment. The clamping force is generated via a mechanical force cassette and a spindle assembly. A setting ring is used for continuous adjustment of the force from 4 to 30 / 40kN. The set clamping force is achieved by simply turning the clamping lever (max. 160°). Mounting and removing the gripos is very quick and easy.
Product details Homepage Product request
02. 5-axis force clamping device
02. 5-axis force clamping device
grepos-5X / 5X-S
Gressel AG
Machine vices
02. 5-axis force clamping device
Both grepos-5X and grepos-5X-S are 5-axis force clamping devices. A wide range of accessories ensures the versatility of the equipment. The quick adjustment with the hand crank is carried out via an entirely sealed spindle with a large pitch. The force is generated directly under the workpiece by means of the force amplifier an is linear. The clamping forces are variable and may be set between 5 and 40 kN using the adjustment ring. The set clamping force is achieved by simply turning the clamping lever (max. 160°). Mounting and removing the gripos is very quick and easy.
Product details Homepage Product request
05. Machine vice
05. Machine vice
S2
Gressel AG
Machine vices
05. Machine vice
S2 single vice in mechanical variant with high accuracy and clamping force as well as extremely slim design. Simplest handling with 160° lever quick clamping device, clamping range quick adjustment and simple clamping thanks to a clamping principle that applies tension.
Product details Homepage Product request
03.1 Single vice for small workpieces
03.1 Single vice for small workpieces
solinos 40
Gressel AG
Machine vices
The solinos 40 is a direct clamping device. The mechanical drive is integrated in a sealed spindle assembly. The force is generated directly without a force amplifier and is linear. The clamping forces depend on the torque moment, clamping range from 0 to ma. 122mm. A wide range of accessories ensures the versatility of the equipment.
Product details Homepage Product request
03.2 Single vice for small workpieces
03.2 Single vice for small workpieces
solinos 65
Gressel AG
Machine vices
The solinos 65 is a direct clamping device.The unit is driven mechanically via a hermetically sealed thread. The force is generated directly in a linear manner, without a force amplifier. The clamping forces depend on the torque applied. The clamping range depends on the jaws used and ranges from 0 to max. 174 mm. A wide range of accessories ensures the versatility of the equipment.
Product details Homepage Product request
03.3 Single vice
03.3 Single vice
solinos 100
Gressel AG
Machine vices
03.3 Single vice
The solinos 100 is a direct clamping device. The unit is driven mechanically via a sealed thread. The force is generated directly in a linear manner, without a force amplifier. The clamping forces depend on the torque applied. The clamping range depends on the jaws used and ranges from 0 to max. 243 mm. A wide range of accessories ensures the versatility of the equipment.
Product details Homepage Product request
04. Machine vice
04. Machine vice
grefors
Gressel AG
Machine vices
04. Machine vice
Mechanical machine vice with continuous force adjustment. 10% to 100% of the clamping force with only 1 rotation of the hand crank and always the same final crank position. Quick adjustment of the clamping range using locking pins.
Product details Homepage Product request
06. double-, single- and centric vice
06. double-, single- and centric vice
duogrip
Gressel AG
Machine vices
The duogrip has been designed for clamping raw parts and finished workpieces. A wide range of accessories ensures the versatility of the equipment. The force is generated mechanically via a left and a right thread. The power gear ratio is linear across the whole clamping range. The maximum clamping force is 30 kN and is achieved with a 120 Nm torque of the spindle. (duogrip 100 +125 are identical)
Product details Homepage Product request
07. single and multiple clamping devices
07. single and multiple clamping devices
multigrip
Gressel AG
Machine vices
The multiple clamping system multigrip is based on a clamping rail with internal gear on both sides and a pitch of 2 mm. Depending on the application, one or more jaws are positioned in a fixed way in the gear and tightened by means of a claw. The moveable jaws with the integrated clamping jaw width 22 mm are also positioned according to the workpiece size in the gear tooth system and tightened by means of a claw. The workpiece is clamped from above with an M10 screw using the inclined clamping jaw. The horizontal stroke of the clamping jaw is 4 mm while the vertical stroke amounts to 8.5 mm. The clamping force is generated entirely mechanically. The force transmission is linear over the entire clamping range.
Product details Homepage Product request
08. centric vice
08. centric vice
C1
Gressel AG
Machine vices
08. centric vice
Centric vice C1 in mechanical version with 100% encapsulation and quick jaw change. Ideally suited for machining blanks and finished products, multiple clamping and automation of pallet storage.
Product details Homepage Product request
09. Centric vice
09. Centric vice
C2
Gressel AG
Machine vices
09. Centric vice
Centric vice C2 in mechanical version with high precision and clamping force. Closed system with optimised chip ejection for high process reliability.
Product details Homepage Product request