Parts and components > Compressed air technology > Air valve technology, general

The valves of the BASIC series are a numerically reduced selection of types of the most frequently used solenoid valves. These exist in 1/8" and 1/4" port sizes in 3/2-way monostable and 5/2-way monostable and bistable versions. Some manufacturing processes have been simplified without compromising performance and quality.
The body is made of anodized aluminium (without painting) and the manual overrides are made of grey technopolymer. BASIC valves can be combined with accessories from other va...

Parts and components > Compressed air technology > Air valve technology, general

The dimensions of the connection diagram of the ISO1, ISO2 and ISO3 valves comply with ISO5599-1. They are available as 5/2 or 5/3 directional control valves with pneumatic or electric actuation.
Translated with DeepL

Parts and components > Compressed air technology > Air valve technology, general

The solenoid valves of the PIV and CNOMO series extend the valve product range and are available in many different designs and variants.
Translated with DeepL

Parts and components > Compressed air technology > Air valve technology, general

Solenoid valves PLT-10 are a further contribution to miniaturisation, increased performance, energy saving and increased reliability in pneumatics. There are a large number of different variants in this design according to ISO 15218. The power required to actuate the PLT-10 valves has been greatly reduced to between 0.3 and 0.8 watts. An LED function display can be integrated on request. A monostable (tactile) manual override can also be integrated as a variant. Reverse polarity protection is pr...

Parts and components > Compressed air technology > Air valve technology, general

Series 70 is the traditional, complete Metal Work range of valves - available in four sizes: 1/8", 1/4", 3/8", 1/2"-three versions: 3/2, 5/2, 5/3 and four types of actuation: manual, mechanical, pneumatic and electro-pneumatic. These valves find a wide range of application as sleeve valves, direct mounting on cylinders with special adapters, or as series valves with multiple valve plates and single interlinking plates.
Translated with DeepL

Parts and components > Compressed air technology > Air valve technology, general

The miniature valves of the VME series are available with both mechanical and manual actuation. The product range offers a wide variety of versions and variants and can therefore cover all common requirements.
Translated with DeepL

Parts and components > Compressed air technology > Compressed air technology, others

As a full supplier, we offer an extensive range of accessories for general pneumatics. Thus, we offer boosters (i.e. pressure amplifiers), soft-start valves, air and rotary distributors as well as silencers and much more.
Translated with DeepL

Parts and components > Compressed air technology > Compressed air technology, others

In addition to the standard pneumatic valves, Metal Work offers a comprehensive range of special valves. This includes quick exhaust valves, stop valves, slide valves, shuttle valves and check valves.
Translated with DeepL

Parts and components > Compressed air technology > Compressed air technology, others

Metal offers different types of logic elements. There are the types OR, AND, NOT and YES. In addition, versions of the type MEMORY and TIMER are offered.
Translated with DeepL

Parts and components > Compressed air technology > Compressed air technology, others

Micro flow regulators can be used to adjust the speed on pneumatic cylinders.
The operation of type C (at the cylinder port) and type V (at the valve port) ensures full flow for supply air and adjustable flow for exhaust. Type B (bi-directional) can be used to control the flow for supply and exhaust. Metal Work offers four different series. This means that the right solution can be provided for every requirement.
Translated with DeepL

Parts and components > Compressed air technology > Compressed air technology, others

Metal Work offers two variants of quick couplings, which in turn are available in different designs. This gives us the possibility to offer the right solution for every requirement.
Translated with DeepL

Parts and components > Compressed air technology > Compressed air technology, others

LINE ON LINE® is a selected range of products for installation in pneumatic circuits. With these small, highly efficient components, it is possible to perform all pneumatic functions at any point of the pneumatic circuit.
LINE ON LINE® is ultra modular ? the components can be installed in parallel, in series or in parallel/series combinations. All LINE ON LINE® products are available for hose-tube connections with two push-in fittings, or for threaded hose connections with nickel-plated brass m...

Parts and components > Compressed air technology > Compressed air conditioning

Pressure switches are actuated by air as a medium and emit an electrical signal at a set pressure. Metal Work offers mechanical and digital pressure switches in different versions and can thus offer a suitable solution for every requirement.
Translated with DeepL

Parts and components > Compressed air technology > Compressed air conditioning

GS series precision regulators are designed for rapid relief of positive pressures and high flow rates. They have equal and opposite acting control valves for inlet and outlet. The pressure setting is almost independent of changes in inlet pressure (see diagram). This ensures high accuracy even when the pressure varies from time to time. The regulator can be mounted directly using the holes in the body or with the mounting bracket provided as an accessory. The body has a 1/8" connection thread f...

Parts and components > Compressed air technology > Compressed air conditioning

Precision proportional pressure regulators of the REGTRONIC series are used to control fluctuating pressures as a function of a specified setpoint. The remote control can be carried out via a cable with M12x1 plug as voltage or current input or via an RS232 interface. Control is also possible directly on the controller using the keys and the display. The actual pressure value and further information as well as diagnostics are visible on a display at any time. This display, the LED indicators and...

Parts and components > Hydraulic and pneumatic components > Pneumatic components, controls and accessories

We have a versatile range of accessories for our pneumatic actuators. This includes parking brakes for cylinders, guide units, mountings, magnetic sensors, positioning systems, shock absorbers and much more. This allows us to offer the right solution for every requirement.
Translated with DeepL

Parts and components > Hydraulic and pneumatic components > Fittings, connections

These fittings are made of materials approved for the food industry. They are also suitable in connection with cold or hot drinking water. Our fittings can be screwed in and out as often as required and always remain pneumatically tight. The materials and technologies selected allow these fittings to be used in the chemical, pharmaceutical, medical and electrical industries.
The F-E Plus and F-NSF Plus range is particularly suitable for use in environments with temperatures up to 150°C.
A stan...

Parts and components > Hydraulic and pneumatic components > Fittings, connections

These fittings are made of materials approved for the food industry. They are also suitable in connection with cold or hot drinking water. An O-ring above the cylindrical external thread serves as a pneumatic seal. Special sealants such as Teflon® are therefore unnecessary. These can leave solid residues during screwing anyway, which would contaminate the environment or the medium. Our fittings can be screwed in and out as often as required and always remain pneumatically tight. The selected mat...

Controls & electronic equipment > Control and drive systems > Linear motors

In addition to purely pneumatic drives, Metal Work also supplies electric cylinders, axes and gantries. Electric axes and portals play an important role in automation technology in particular. The range includes one-dimensional axes in various designs as well as three-dimensional gantries. This means we can offer the right solution for every requirement.

Translated with DeepL

Parts and components > Hydraulic and pneumatic components > Pneumatic components, controls and accessories

Pneumatic grippers are used for handling in automation processes. Metal Work offers a wide range of pneumatic grippers, so that the right solution can be offered for every handling requirement.
Translated with DeepL

Parts and components > Hydraulic and pneumatic components > Pneumatic components, controls and accessories

In addition to a wide range of standardised pneumatic cylinders, Metal Work also offers non-standardised pneumatic cylinders. These are available in different designs and variants and range from round cylinders to compact cylinders and miniature cylinders. We can therefore offer the right solution for every requirement.

Translated with DeepL

Parts and components > Hydraulic and pneumatic components > Pneumatic components, controls and accessories

Our range of compact cylinders includes a number of standard cylinders and non-standard cylinders. This enables us to offer the right solution for every requirement.

Translated with DeepL