JOKISCH FOTIA MILO C.F

Environmentally friendly, hydrated anti spatter fluid for MIG and MAG welding.

Active welding substance concentrate can be used for most common industrial welding process. Prevents the adherence of welding spatter to the workpiece surface.
Dilute with water before use. Can be applied with hand sprayers or air spray cans.
Spray the work surface slightly, apply only thin spray film.

• For arc welding with electrodes, easy removal of the slag, even with V-seams
• Easy cleaning of welding seams
• Also prevents the welding spatter from burning in the burner heads during inert gas welding and contact welding.
• When used correctly no complications with further processing of priming, painting, galvanizing etc
• It is completely non flammable and can therefore be applied without risk in the workplace
• Product is exempted from the specific labelling requirements of hazardous products according to ordinance on hazardous substances

An environmentally friendly silicone-free release agent for inert gas and electrofusion welding. Suitable for radiopaque welds. No CFC and CHC contamination and no release of propane/butane, as applied by hand sprayer or air spray can.

- No burning of the welding spatters on the workpieces and thus no costly post-processing of the workpieces.
- easy removal of the slag during arc welding with electrodes, even with V-seams.
- Very easy cleaning of the welding seams. The residues can be easily removed with warm water or alkaline degreasing agents.
- prevents the weld spatter from burning in the torch heads during inert gas welding processes and contact welding.
- no difficulties during painting, electroplating, browning etc.
- Product contains no water and should therefore be used for radiopaque welds.

- no release of CFC/CKW or combustible propane/butane.
- Product is not a hazardous substance or does not require labelling.
- No spray can waste products.
- easily and quickly biodegradable according to test method OECD 301 A-F.

Environmentally friendly, hydrated anti spatter fluid for MIG and MAG welding.

Ready-to-use active welding substance, can be used for most common industrial welding
process. Prevents the adherence of welding spatter to the workpiece surface.
Can be applied with hand sprayers or air spray cans.
Spray the work surface slightly, apply only thin spray film.

• For arc welding with electrodes, easy removal of the slag, even with V-seams
• Easy cleaning of welding seams
• Also prevents the welding spatter from burning in the burner heads during inert gas welding and contact welding
• When used correctly no complications with further processing of priming, painting,galvanizing etc.
• It is completely non flammable and can therefore be applied without risk in the workplace
• Product is exempted from the specific labelling requirements of hazardous productsaccording to ordinance on hazardous substances

Environmentally friendly, hydrated anti spatter fluid for MIG and MAG welding.

Active welding substance is contained in an aluminum bag, thus three times more efficient than conventional spray cans. The propellant used is non-flammable compressed air.

• For arc welding with electrodes, easy removal of the slag, even with V-seams
• Easy cleaning of welding seams
• Also prevents the welding spatter from burning in the burner heads during inert gas welding and contact welding
• When used correctly no complications with further processing of priming, painting, galvanizing etc.
• It is completely non-flammable and can therefore be applied without risk in the workplace
• Product is exempted from the specific labelling requirements of hazardous products according to ordinance on hazardous substances
• VOC free
• Spray can contains no hazardous solvents
• No release of CFC / CFC or flammable propane / butane


Advantages of the 2-chamber spray can

• Very high proportion of active ingredients, 3 more economical than conventional spray cans
• Spray can can be used in any position, even in overhead operation
• Emptying the spray can up to 99%
• Cost saving