Drag frame conveyors (SRB)

The accumulating conveyors are designed for the direct and indirect transport of workpieces onto pallets. Because of indivdually connected conveyor sections, the transport length can be extended any time if desired. The pallet return is performed by lifting and lowering stations. Because of their accumulating ability, they are indexing independent.

Technical data:

Pallet weight with workpieces [kg]: max. 50
Conveyor length per section [m]: max. 14
Transport capacity each conveyor section [kg]: max. 1,000
Transport Speed [m/min]: 6/8

With friction roller tape, workpieces can be transported directly or on pallets. Due to the effect arrangement in are independent clock.

The hinged chain conveyors are designed for direct transport of workpieces with an even surface, that may touch during transport. For workpieces which are heavy or do not have an even surface, a multiple lane design is possible.

Technical data:

Workpiece weight [kg]: max. 10
Conveyor length [m]: max. 10
Transport capacity [kg]: max. 300
Propulsion: Three-phase gear motor
Transport speed [m/min]: 6
Belt design: 1 or 2 tracks
Workpiece diameter (standard) [mm]: max. 300, special sizes on request
Additional equipment: Spin apparatus, suction unit, identification equipment, manual central workpiece guide adjustment

Pallet accumulating conveyors are designed for the pallet transport of workpieces within the production area. The pallet return is automatic without lifting and lowering stations. Based on their accumulating ability, they are indexing Independent.

Technical data:

Workpiece weight [kg]: max. 80
Conveyor length [m]: max. 20
Transport capacity [kg]: 1,000
Propulsion: Three-phase gear motor
Transport speed [m/min]: 6

The plastic chain conveyors are designed to transport any number of unevenly-shaped workpieces without them touching each other. The workpieces are transported on pallets. Modular corner pieces mean that any type of conveyor shape is possible. Parallel machines are connected using satellite units.

Technical data :

Workpiece weight (Standard) [kg]:max. 20
Workpiece weight (heavy load) [kg]: max. 180
Conveyor length [m]: max. 10 je Antrieb
Transport capacity per drive [kg]: 300
Propulsion: Three-phase gear motor
Number of drives: max. 4
Transport speed [m/min]: 6/12
Workpiece diameter (standard) [mm]: max. 400, special sizes on request
Additional equipment: Spin apparatus, suction unit, identification equipment, stacker, tilt/turn device, adjustable workpiece holder, roller supports for heavy-duty version, tilt protection for upright parts

The indexing chain conveyors are designed for the transport of shafts such as crankshafts, camshafts, or axis shafts on workpiece supports. The forward motion can be selected in different indexing units.

Technical data:

Workpiece weight [kg]: max. 50
Conveyor length [m]: max. 14
Transport capacity [kg]: 1,000
Propulsion: Three-phase gear motor
Transport speed [m/min]: 5

The toothed chain conveyors are designed for direct transport of workpieces with an uneven surface (e.g. pins or collars), that may touch during transport. Based on their accumulating ability, they are indexing independent.

Technical data:

Workpiece weight [kg]: max. 10
Conveyor length [m]: max. 14
Transport capacity [kg]: 300
Propulsion: Three-phase motor with plug-in gears
Transport speed [m/min]: 6
Belt design: 2 tracks
Workpiece diameter (standard) [mm]: max. 300, special sizes on request
Additional equipment: Spin apparatus, suction unit, identification equipment, manual central workpiece guide adjustment