542,201 active members*
1,363 visitors online*
Register for free
Login Register
Mastercam News

Mastercam X7 Lathe

Tolland, CT – Mastercam X7 Lathe delivers a suite of new features aimed at increasing your productivity. From the new Dynamic Rough toolpath and Rough Zigzag motion,
to Face Grooving and more, Mastercam X7 Lathe ensures that you’re ready for any job in the shop.

New Dynamic Rough Toolpath
The Lathe Dynamic Rough toolpath is designed for hard materials cut with button inserts (i.e., radius or ball). The dynamic motion allows the toolpath to cut gradually,
remain engaged in the material more effectively, and use more of the surface of your insert, extending the tool life and increasing the cutting speed.
 

The Lathe Dynamic Rough toolpath is designed for hard materials cut
with button inserts (i.e. radius or ball).


Rough Zigzag Motion
The new options for Lathe Rough toolpaths provide you with more control of your zigzag tool motion. You can choose to move back and forth, straight across, or ramp downward with each tool pass.

Face Grooving
The new grooving parameters allow you to position your tool accurately for face grooving. Enter a maximum and minimum start diameter for positioning the first groove cut.
 

The new grooving parameters allow you to position your tool accurately for face grooving.

Plunge Turn Toolpath
In previous versions of Mastercam, the Plunge Turn toolpath only supported flat bottomed tools. In Mastercam X7 Lathe, full radius tool support is available.

 

>> Lathe Video Overview <<

 

Responsible for the content of this press release: InterCAM-Deutschland GmbH

Responsible for the content of this press release: InterCAM-Deutschland GmbH

Contact

InterCAM-Deutschland GmbH
Am Vorderflöß 24a
33175 Bad Lippspringe
Germany
+49 5252 98 999 0

Route planner

Route planner