Standard Fittings SERIES A

? Body: OT58 brass
? Maximum pressure 261 psi, 1800 kPa 18 bar

Our Series D includes:
- Banjo Bodies
- Banjo Stems
- Washer
... and much more!

? Body: OT58 brass
? Maximum pressure 870 psi, 6000 kPa 60 bar
? For use with copper tubes

Our Series B includes:
- Straight connector
- Bulkhead connector
- Elbow connector
- Tee connector
... and much more!

Push-in fittings by Metal Work are the best elements for connecting pipes and actuators.
Quick and easy to use, the Metal Work push-in fitting can be re-used thousands of times without affecting the pneumatic and mechanical seal in any way. It comes in various configurations and guarantees a virtually unlimited, highly flexible use. The clamping spring with its special shape grips the pipe without scratching or deforming it, which facilitates release.
In the fittings, the release bushing has patented screwdriver slots to facilitate release in applications not accessible to the fingers. Configurations RL19, RL21, RL22, RL23, RL23M, RL24, RL44, and RL49 (except for Ø5), have a ring for fixing to the wall asymmetrically in order to contain the head of a screw within the overall dimensions of the fitting.

? Body: OT58 brass
? Maximum pressure 261 psi, 1800 kPa 18 bar

Our Series B includes:
- Straight connectors
- Bulkhead connectors
- Elbow connectors
- Tee connectors
... and much more!

These fittings are made of materials suitable for use in the food industry.They can also be used with hot and cold tap water.
All brass component parts undergo a clean-lead process, which consists of removing lead from the surface layer of the fitting; the gaskets are made of special FDA-approved Viton®. These fittings do not contain technopolymers, thereby avoiding problems of compatibility with detergents and other chemical agents. This choice of materials allows the fittings to be used up to 150°C, which makes them suitable for other high-temperature applications, in addition to the food industry.
The threads are cylindrical and under-head O-rings provide a pneumatic seal. This avoids the need for sealants (e.g. Teflon®), which could release solid fragments during screwing and unscrewing that would contaminate the environment or the fluid. Our fittings can be screwed and unscrewed any number of times and still remain clean and pneumatically sealed.
This choice of materials and treatments make these fittings suitable for use in the chemical, pharmaceutical, medical and electronics industry.
The fittings are available in two series:
? Series F-E fittings are made of brass that undergoes a surface clean-lead process, followed by a surface coating with inter-metal alloy compound; they comply with regulatory standards applicable in Europe and other world countries for use in contact with foodstuffs or drinking water.
? Series F-NSF fittings are made of brass with a low-lead content (? 0.2%) that undergoes a further surface clean-lead process in compliance with US standards, and are certified to NSF169 and NSF61 standards. A standard range of fittings is available, but other designs can be developed on specific request.