532,310 active members*
3,595 visitors online*
Register for free
Login Register
SCHUNK - Gripping and Clamping News

A new flagship for quick-change pallet technology

SCHUNK, the competence leader for gripping systems and clamping technology, is introducing two premium quick-change pallet modules with unique features on the marekt: The VERO-S NSE3 138 quick-change pallet module and the VERO-S NSE-T3 138 tombstone module. Their most striking feature is an optional spring-actuated cone seal that automatically locks the module's changing interface as soon as the clamping pin is lifted. In combination with the integrated blow-out function, the quick lock prevents chips or dirt from lodging into the interface. Without changing the height, it locks the last gateway of the otherwise completely sealed modules.

The VERO-S NSE3 138 quick-change pallet module disposes of high pull-down forces and a high rigidity. On option, kit can be equipped with a cone seal that prevents chips or dirt from lodging in the changing interface. The VERO-S NSE-T3 138 version is additionally available for the use on tombstones.


Pull-down force and rigidity have been increased even further

SCHUNK has yet again boosted the performance characteristics of the VERO-S NSE3 138 as compared to previous top sellers. An enormous pull-down force of 8,000 N or 28,000 N with activated turbo function as well as increased dimensional stability for the module body have a positive impact on the rigidity of the clamping solutions. Thus, even the highest tilting moments and transverse forces can be reliably absorbed when parts are clamped at the base are machined on at height, for example. Clamping and positioning also occur via a short taper with a repeat accuracy of < 0.005 mm with the premium modules. This ensures maximum precision even in the most demanding applications. Due to the conical fitting, the clamping pins can also be joined into the modules eccentrically, making this process incredibly easy. The actual clamping is done via spring force without any external energy supply; it is form-fit and self-locking. The workpieces remain safely clamped in case of a sudden pressure drop in the air system. A pneumatic system pressure of 6 bar is sufficient to open the clamping modules.



Convenient monitoring

For maximum process reliability, both clamping slide positions "open" and "closed" can be queried as standard using dynamic pressure. On option, a position sensor can be used, which additionally detects a locking process without pins. Depending on the thread diameter of the clamping pins have holding forces of 35,000 N (M10), 50,000 N (M12), or 75,000 N (M16). All components, such as base bodies, clamping pins, and clamping slide, are made of hardened stainless steel, making them absolutely corrosion-resistant and extremely long-lasting. Special support areas facilitate cleaning and ensure a perfectly flat contact surface for the clamping devices and workpieces. The new premium modules are fully compatible with the previous VERO-S modular system, which now consists of more than 1,000 possible combinations for highly efficient workpiece clamping.

Responsible for the content of this press release: SCHUNK GmbH & Co. KG Spann- und Greiftechnik


SCHUNK GmbH & Co. KG Spann- und Greiftechnik
Bahnhofstr. 106 - 134
74348 Lauffen
(+49 7133) 1 03-0
(+49 7133) 1 03-23 99

Route planner

Route planner