535,350 active members*
3,063 visitors online*
Register for free
Login Register
SIMTEK  - Banner
SIMTEK Products
SIMTEK Präzisionswerkzeuge GmbH
End millers

simmill PX|SX|UX|VX - groove milling tools

Extensive and wide spread range of indexable carbide milling inserts and carbide or heavymetal-milling cutter shanks with antivibration features. Milling inserts with three or six cutting edges for applications in bores between Ø 10,0 mm and Ø 40,0 mm. The insert seat is designed to provide optimal cutting force transmission as well as tight concentricity and axial-runout tolerances.

Main applications:
- Circlip ring grooves
- Chamfering
- Thread milling
- Groove milling
  • simmill PX|SX|UX|VX
  • Circlip ring grooves
  • Thread milling
  • Chamfering
Product details Homepage Product request
simmill AX - groove milling starting Ø 1,4 mm
simmill AX
End miller
SIMTEK Präzisionswerkzeuge GmbH
End millers
Solid micro grain carbide milling cutter for groove milling applications in bores as of min. Ø 1,4 mm. Available with three and partly with four edges. High groove depths as well as extended thread depths at low cutting pressure, are possible with this system.

Wide range of standard applications.

- Improved cutting conditions with three cutting edges
- Usable lengths up to 35,6 mm
- Micro Grain Carbide with high performance coatings

Main applictaions:
- Groove milling
- Chamfering
- Thread milling
  • simmill AX
  • Groove milling
  • Chamfering
  • Thread milling
Product details Homepage Product request
simmill H2 - milling of grooves, slots and key ways
simmill H2 - milling of grooves, slots and key ways
side and face cutter, indexable inserts for milling
SIMTEK Präzisionswerkzeuge GmbH
End millers
Active and easy-to-use clamping system for 3,6 times higher cutting depths* and high process reliability.

simmill H2 provides very high process reliability and tight axial and radial runout tolerances thanks to precision ground two-edged indexable cutting inserts in combination with an active and easy-to-use clamping system. The stable clamping system provides up to 3,6 times higher cutting depths* as of cutting edge width 1,3mm.

*Compared to simmill MX

- Precision ground cutting edges as of cutting edge width 1,3 mm
- Maximum cutting depth of 18,0 mm
- Cutting diameter of 100,0 mm und 4''
  • simmill H2 – milling of grooves, slots and key ways
Product details Homepage Product request
simmill K2 - groove milling starting Ø 39,0 mm
simmill K2 - groove milling starting Ø 39,0 mm
side and face cutter, indexable inserts for milling
SIMTEK Präzisionswerkzeuge GmbH
End millers
For the internal machining in bores as of Ø 39 mm simmill K2 offers, thanks to two cutting edges, considerably more cutting edges by contrast with comparable three-cutting-edged systems. Suitable milling cutter shanks, milling cutters or disc milling cutters are available with up to 20 insert seats.

Up to three time more cutting edges on equal cutting diameter compared to simmill MX.
Product details Homepage Product request
simmill MX - groove milling as of Ø 39,0 mm
simmill MX
Side and face cutter, indexable inserts for milling
SIMTEK Präzisionswerkzeuge GmbH
End millers
System of milling cutter shank, milling cutter or disc milling cutter and indexable milling insert with three cutting edges. Between 2 and 15 milling inserts per toolholder. Groove milling with high precision and stability in bores as of Ø 39,0 mm.

All the toolholders are designed for use with SIMTEK-M14 inserts. The M14 indexable insert offers 3 edges per insert, high precision and repeat accuracy.

Example applications:
- Groove milling internal
- Groove milling external
- Groove and slot milling
  • simmill MX
  • Groove milling external
  • Schlitz- und Trennfräsen
  • Groove milling internal
Product details Homepage Product request
simmill PMX - Milling operations between Ø 7,0 mm and Ø 11,0 mm
simmill PMX -  Milling operations between Ø 7,0 mm and Ø 11,0 mm
End miller
SIMTEK Präzisionswerkzeuge GmbH
End millers
Milling tools for use in bores between Ø 7,0 mm and Ø 11,0 mm.

With simmill PMX, SIMTEK extends its range of milling tools by three edged milling inserts together with matching toolholders for milling operations in bores between Ø 7,0 mm and Ø 11,0 mm. The milling inserts are available with five different cutting diameters between ØDS = 6,7 mm and ØDS = 10,7 mm for the milling of circlip ring grooves, groove, slot and key way milling as well as for the milling of metric ISO threads (partial and full profile).

- High-performance milling inserts in five different sizes
- Cutting edge widths starting at 0,3 mm
- Milling cutter shanks made of carbide or steel with through coolant supply and vibration-reducing insert seats
- Insert seat design for use of all insert sizes
Product details Homepage Product request