Presses for special applications

With the patented SFFS straightening technology [Shear-Force-Free-Straightening] the required process forces are introduced exclusively via the material ends. This means that, among other things, finished products can be straightened without straightening marks on the surface. It is essential that residual stress in the material is reduced as a result of the shear force free straightening technology.

The straightening process is applicable for the following materials:
- Metallic bars, tubes and hollow profiles with rotation symmetric or almost rotation symmetric cross-section
- Finished- and semi-finished products as well as raw materials

SERIES

SFFS 30 - 2.000
[cross-section 10 - 30 mm| length 300 – 2.100 mm]
SFFS 30 – 3.000
[cross-section 10 - 30 mm| length 300 – 3.100 mm]
SFFS 50 – 2.000
[cross-section 15 - 50 mm| length 500 – 2.200 mm]
SFFS 50 – 3.000
[cross-section 15 - 50 mm| length 500 – 3.200 mm]

FEATURES

WIDE RANGE OF APPLICATIONS
Straightening of semi-finished products and already machined parts, e.g. lead screws, racks, etc.

SUPERIOR SURFACE QUALITY
No straightening marks due to shear force free straightening technology -> straightening/post-straightening
of finished parts possible.

REDUCTION OF RESIDUAL STRESS
Due to the SFFS straightening technology residual stress in the material will be reduced -> advantage
for subsequent machining of the straightened materials.

VARIABLE MACHINE CONCEPTS
Standalone solutions up to fully automatic production cells -> straightening automats with manual or robot
handling, with integrated straightness control unit, linked with automatic lathes with bar loader, etc.